Abstract:Structural Health Monitoring, Ahead of Print. Ultrasonic-guided waves full wavefield scanning technology can realize non-destructive testing with non-contact. The damage detection method based on ultrasonic-guided waves' full wavefield data is widely used in thin-walled plate structures. The defect imaging method based on full wavefield data faces the challenge of simultaneously obtaining the defect contour and thickness direction information. Based on the ultrasonic-guided waves full wavefield scanning detection technology, this paper proposes a multi-time Lamb waves space wavenumber imaging method. In this method, the analytic signal of Lamb wavefield at each moment is constructed by Hilbert transform, and the phase unwrapping is carried out by amplitude sorting and multi-clustering method. Then the wavenumber information is obtained by calculating the phase gradient. The wavenumber at different times of each measurement point is arranged in descending order, and the median wavenumber is extracted as the wavenumber at each measurement point. Based on the dispersion relationship of the tested specimen, the quantitative detection of the plate thickness in the detection area is realized. This method is first applied to the simulation model. Then it is applied to the defect imaging and quantitative detection of aluminum plates with rectangular groove defects and carbon fiber reinforced plastics (CFRP) plates with delamination defects. In simulation and experiment, the local wavenumber imaging method, the frequency domain instantaneous wavenumber imaging method, and the multi-time Lamb waves space wavenumber imaging method are used for defect imaging and quantification. The imaging results are compared and analyzed. The result shows that the multi-time Lamb waves space wavenumber imaging method can restore the morphology of groove defects in aluminum plates and delamination defects in CFRP plates, and accurately estimate the depth of groove defects and the location of delamination defects.

Experimental Research on Circumferential Guided Wave Scanning Imaging of Thick Wall Pipes Based on Continuous Wavelet Transform

Evaluation of Pipe Axial Defeat Through the Use of Ultrasonic Guided Wave and Matching Pursuit

Ultrasonic Guided Wave-Based Circumferential Scanning of Plates Using a Synthetic Aperture Focusing Technique

Deconvolution Imaging of Weak Reflective Pipe Defects Using Guided-Wave Signals Captured by a Scanning Receiver

Ultrasonic Dynamic Plane Wave Imaging for High-Speed Railway Inspection

Ultrasonic Full Guided Wavefield for Damage Detection in Curved CFRP Parts

An Enhanced Long-Range Guided-Wave Pipe Inspection Method Based on Local Axial 2-D Signal Acquisition and Processing.

Guided Wave Imaging of Oblique Reflecting Interfaces in Pipes Using Common-Source Synthetic Focusing

Imaging of Nonaxisymmetric Area Discontinuities in Pipes Using Guided Wave Synthetic Focusing

A systematic tomography framework for thickness mapping of pipes using helical guided waves

Multi-time Lamb waves space wavenumber imaging method based on ultrasonic-guided wavefield

Wavenumber-Domain Fast Reconstruction Technique Using Ultrasonic Scanning for Transverse Wave Imaging

Non-destructive Evaluation of Spiral-welded Pipes Using Flexural Guided Waves

Guided Waves Based Diagnostic Imaging of Circumferential Cracks in Small-Diameter Pipe.

A New Multichannel Time Reversal Focusing Method for Circumferential Lamb Waves and Its Applications for Defect Detection in Thick-Walled Pipe with Large-Diameter.

Location Detection and Numerical Simulation of Guided Wave Defects in Steel Pipes

Study on simulation of non-destructive testing for pipeline defects by ultrasonic guided waves

Internal and External Pipe Defect Characterization via High-Frequency Lamb Waves Generated by Unidirectional EMAT

Numerical Investigation of Application of Unidirectional Generation to Improve Signal Interpretation of Circumferential Guided Waves in Pipes for Defect Detection

Theoretical and Experimental Studies of Longitudinal Guided Wave Generation in Hollow Cylinders by Multielement Transducers

Detection and Classification of Uniform and Concentrated Wall-Thinning Defects Using High-Order Circumferential Guided Waves and Artificial Neural Networks