Abstract:Purpose of the study : In vitro to study the degree of adhesion of vitreous substitutes, such as silicone oil of various viscosities and perfluorodecalin (PFOS), to hydrophobic acrylic polymer IOLs and evaluate the interaction of vitreous substitutes with the model MIOL-Soft-23 in the clinic. Material and methods . IOLs of the model MIOL-Soft-23 were taken for the experiment. MIOL-Soft-23 are included in the RPR-20 set. IOL of the model MIOL-Soft-23 is made by photopolymerization from a biocompatible spatially cross-linked hydrophobic acrylic polymer based on oligomers and monomers of the methacrylic series with filters in the ultraviolet region of the spectrum from 19 to 23 D. For the experiment, silicone oils of different viscosities were taken: RS-OIL 2000 (Alchimia), SIL-5000-S (DORC), Oxane 5700 (Bausch & Lomb), PFOS (perfluorodecalin) Dk-line (Bausch & Lomb). Also, saline sodium chloride 0.9 % (Solofarm) was used. Results . Revealed a decrease in the degree of silicone adhesion to the surface of acrylic hydrophobic IOLs as the temperature rises, not less than 1.5 %. The absence of dependence of the degree of adhesion on the degree of viscosity of silicone oil was confirmed, which corresponds to the literature data. For the first time, the average percentage of adhesion of perfluorodecalin to the IOL surface data were obtained, in particular, the MIOL-Soft-23 model. The range of values ranged from 0.7 to 7.2 %. The average coverage percentage is 1.9 ± 1.3 % (exposure at 37 ± 1 °C for up to 14 days) and 3.4 ± 1.5 % (exposure at room temperature for up to 14 days). This confirms the need for careful intraoperative monitoring of the completeness of removal of PFOS droplets from the IOL surface. Conclusion . The presence of the risk of adhesion of residual drops of silicone oil and PFOS to the surface of the IOL necessitates careful intraoperative control of the completeness of the removal of vitreous body substitutes, as well as further search for the best ways to eliminate this complication. The conducted complex of studies makes it possible to recommend the use of IOL model MIOL-Soft-23 in complicated cases of vitreal surgery.

Surface Modification Of Silicone Intraocular Lens By 2-Methacryloyloxyethyl Phosphoryl-Choline Binding To Reduce Staphylococcus Epidermidis Adherence

Reduced Silicone Oil Adherence to Silicone Intraocular Lens by Surface Modification with 2-Methacryloyloxyethyl Phosphoryl-Choline

Improvement of the surface biocompatibility of silicone intraocular lens by the plasma-induced tethering of phospholipid moieties.

UV-assisted Treatment on Hydrophobic Acrylic IOLs Anterior Surface with Methacryloyloxyethyl Phosphorylcholine: Reducing Inflammation and Maintaining Low Posterior Capsular Opacification Properties.

Improvement of Uveal and Capsular Biocompatibility of Hydrophobic Acrylic Intraocular Lens by Surface Grafting with 2-Methacryloyloxyethyl Phosphorylcholine-Methacrylic Acid Copolymer

[Surface Modification of Poly Methyl Methacrylate Intraocular Lens by Alpha-Allyl Glucoside].

Antifouling Silicone Hydrogel Contact Lenses with a Bioinspired 2-Methacryloyloxyethyl Phosphorylcholine Polymer Surface

Bionic antibacterial modification of IOL through SI-RAFT polymerization of P(TOEAC-co-MPC) brushes to prevent PCO and endophthalmitis

Plasma Surface Modification Of Rigid Contact Lenses Decreases Bacterial Adhesion

[In Vitro Adherence of Bacteria to Intraocular Lenses of Different Materials].

Antiadhesive and antibacterial polysaccharide multilayer as IOL coating for prevention of postoperative infectious endophthalmitis

Uveal and Capsular Biocompatibility of an Intraocular Lens with A Hydrophilic Anterior Surface and A Hydrophobic Posterior Surface

Foldable Glistening-Free Acrylic Intraocular Lens Biomaterials with Dual-Side Heterogeneous Surface Modification for Postoperative Endophthalmitis and Posterior Capsule Opacification Prophylaxis

Improving Hydrophilicity and Protein Resistance of Silicone Hydrogel by Plasma Induced Graft Polymerization of 2- Methacryloyloxyethyl Phosphorylcholine

Inhibition of Escherichia Coli and Proteus Mirabilis Adhesion and Biofilm Formation on Medical Grade Silicone Surface

Studying the Interaction of Viteral Substitutes with the Surface of Acrylic Intraocular Lenses

Methacrylate polymer layers bearing poly(ethylene oxide) and phosphorylcholine side chains as non-fouling surfaces: in vitro interactions with plasma proteins and platelets.

Surface Modification of Hydrophobic PMMA Intraocular Lens by the Immobilization of Hydroxyethyl Methacrylate for Improving Application in Ophthalmology

Preparation and Biological Evaluation of Silicone Hydrogel Grafted with Poly(2-methacryloyloxyethyl phosphorylcholine)

Self-assembled Coating with a Metal-Polyphenolic Network for Intraocular Lens Modification to Prevent Posterior Capsule Opacification.

Cell Adhesion Study of Hydrophobic Intraocular Lenses after Single Surface Modification