Abstract:C/CMS composite membranes from poly(furfuryl alcohol) for gas separation were successfully prepared, in which porous coal-based carbon tubes with an average pore diameter of 0.11μm and a porosity of 40.3% were used as support. The tubular support was coated using viscous poly(furfuryl alcohol) liquid to form an organic layer that was transformed into a thin top layer of carbon membrane after pyrolysis. The gas separation performance of the as-prepared carbon membranes was evaluated at 25, 60 and 80°C by molecular probe method. The morphology and structure changes of C/CMS composite membranes during pyrolysis were examined using SEM, HRTEM, FTIR and XRD techniques. The results show that C/CMS composite membranes with uniform and defect-free thin top layer can be made by one-step coating with viscous poly(furfuryl alcohol) liquid and following pyrolysis. The as-prepared C/CMS composite membranes have excellent gas separation properties for gas pairs such as H2/N2, CO2/N2, O2/N2 and CO2/CH, and the highest permselectivity at 25°C can reach up to 465.0, 58.8, 13.2 and 160.5, respectively. It has been found that the permeabilities of the composite membranes decrease while the permselectivities increase as the pyrolysis temperature increases from 300 to 700°C. During pyrolysis, the polymeric structure of poly(furfuryl alcohol) has been transformed into an amorphous turbostratic carbon structure with ultramicropores. For the as-prepared C/CMS composite membranes, the gas separation performance in this work exhibits great competition respect to other carbon membranes reported. These clearly indicate that the C/CMS composite membranes prepared from furfuryl alcohol polymers is a promising membrane for gas separation.

Preparation and applications of coal-based tubular carbon membranes

Preparation and Modification of Ceramic Membrane and Its Application in Oil/Water Wastewater Treatment

Preparation of Tubular Composite Carbon Membrane for Gas Separation

Preparation of Coal-Based Microfiltration Carbon Membrane and Application in Oily Wastewater Treatment

Preparation of A Plate-Like C/C Composite Membrane for Gas Separation

Effects of Carbonization Conditions on the Properties of Coal-Based Microfiltration Carbon Membranes

Preparation and Gas Separation Properties of Poly(Furfuryl Alcohol)-Based C/Cms Composite Membranes

Pore Structure Prediction of Coal-Based Microfiltration Carbon Membranes

Carbon membrane for gas separation derived from coal tar pitch

Preparation of PPESK based composite carbon membrane for gas separation

Preparation of Free-Standing High Quality Mesoporous Carbon Membranes

The surface modification of coal-based carbon membranes by different acids

Physical Design, Preparation and Functionalization of Carbon Membranes for Gas Separation

Physical Design, Preparation and Functionalization of Carbon Membranes for Gas Separation: Physical Design, Preparation and Functionalization of Carbon Membranes for Gas Separation

Extrusion of Silicon Carbide Based Tubular Membrane Incorporated With Coal Fly Ash and Performance Evaluation in Water Treatment

Improvement on mechanical strengths of coal-based tubykar microfiltration carbon membranes

Fabrication of Carbon Membrane and Microfiltration of Oil-In-Water Emulsion: an Investigation on Fouling Mechanisms

Porous ceramic membranes from coal fly ash with addition of various pore-forming agents for oil-in-water emulsion separation

Preparation and application of microfiltration porous coal gangue–loess‐based ceramic membrane

PREPARATION AND O2/N2 SEPARATION PERFORMANCE OF CARBON MOLECULAR SIEVE MEMBRANES DERIVED FROM POLY(FURFURYL ALCOHOL)

Thin Zeolite T/Carbon Composite Membranes Supported on the Porous Alumina Tubes for Co2 Separation