Abstract:During rover lunar exploration missions (such as China's “Chang'e”), rovers are required to move autonomously on the loose lunar soil. Control methods based on the rigidity hypothesis can hardly be expected to satisfy these requirements practically so wheel-soil interaction mechanics should be taken into account. The currently used integral model based on wheel-soil interaction mechanics, however, is complicated, and it cannot be directly applied to the design of a lunar rover's controller. This paper presents a new simplified method of determining the wheel-soil interaction of lunar rovers by introducing a normal stress factor and the ratio of the forward region to the rear region, based on an analysis of the integral model and lunar soil parameters. As an example, numerical analysis is performed for a lunar rover wheel with a width of 165 mm and a radius of 135 mm. Based on a slip ratio as high as 0.4 and an entrance angle that varies from 10° to 40°, the results show that the maximum errors of the model for the calculation of normal force and drawbar pull force are less than 2%, while the maximum error of resistance torque is approximately 5%. When designing a rover's controller, the relationship between the driving torque of wheel T and the drawbar pull of wheel FDP is T = FDPr according to the rigidity hypothesis, a relationship that contradicts the terramechanics model. The proposed simplified model, which is verified by experiments, provides an important basis for the design of a control algorithm for a lunar rover that takes into account lunar wheel-soil interaction mechanics.

Analysis on dynamic load between moon surface and cartwheel of eight wheeled torsion-bar rocker typed moon vehicle

Vibration Analysis of Eight-wheel Lunar Rover with the Torsion-bar and Rocker Structure

Vibration Analysis on the Deployable Eight-wheel Lunar Rover with the Torsion-bar and Rocker Structure

Analysis of dynamic load between wheels of the planetary wheel lunar rover and ground

Dynamics analysis of the lunar rover with planetary wheel

Vibration Dynamic Deflection Analysis for Suspension System of Planetary-Wheel Lunar Rover

Riding Comfort Analysis For Two Degrees Model For Mannedllunarvvehicle

Dynamic Modeling and Vibration Analysis for the Vehicles with Rigid Wheels Based on Wheel-Terrain Interaction Mechanics

DYNAMIC ANALYSIS OF SPATIAL TRUSSED LUNAR LANDER

Modeling and simulation on the differential balancing mechanism of lunar rover

Kinematic modeling and analysis of variable diameter wheeled lunar rover

Moon detection vehicle with diameter-variable wheels and its obstacle surmounting capability analysis

Analysis of Inherent Characteristics, Load Sharing Characteristics, and Transportation Mechanical Response of a Transmission System in a Lunar Sampler and Its Experimental Verification

Mechanical Analysis and Performance Optimization for the Lunar Rover’s Vane-Telescopic Walking Wheel

Kinematics, dynamic analysis and simulation of lunar rover

Research on kinematics and dynamics of lunar rover with new configuration

Development of Suspension Frame of New Eight-wheel Lunar Rover

Design and Analysis of a Lunar Crewed Vehicle with a Novel Versatile Compliant Suspension Mechanism

Dynamic Model Building and Simulation for Mechanical Main Body of Lunar Lander

Motion-control-based analytical model for wheel-soil interaction mechanics of lunar rover

Mobility performance evaluation of lunar rover andoptimization of rocker-bogie suspensionparameters