Abstract:Amorphous poly(ethylene terephthalate) (PET), which possess a low softening temperature (Ts=75°C), was exploited to fabricate the electrophoresis chip with an integrated gold electrode for amperometric detection, with emphases being focused on the PET surface modification via UV light and air plasma. Both UV irradiation and plasma treatment were found to be able to improve the surface wettability, enhance the supported electroosmotic flow (EOF), and increase thermal bonding strength of PET sheets, with the latter being more efficient and less time-consuming than the former in the surface modification. Upon treated with plasma for 2min, the PET sheets could be thermally bonded at 65°C. T-peer test showed that the bonding strength increased from 10g/cm for native PET sheets to 1250g/cm for the plasma treated sheets when chips were bonded at the softening point, Attenuated-total-internal-reflection spectrum showed that, after being exposed to the UV light, carboxylic groups site-selectively formed in the UV-exposed region on PET surface. These UV-induced carboxylic groups were further utilized as the scaffold for preparation of micro-gold electrode via electroless gold plating. By using this established UV-directed electroless plating and the plasma-assisted thermal bonding techniques, the full PET electrophoresis chip with an integrated micro-gold electrode could be fabricated in common chemistry laboratory without the need of clean rooms. The fabricated PET chips were demonstrated for separation and detection of model analytes of dopamine (DA) and catechol (CA). Satisfactory resolution of the two analytes was achieved within 40s, and detection limits of 0.87μM and 1.28μM for DA and CA were obtained, respectively.

A plasma-polymerized film for capacitance immunosensing.

Development of a disposable micro-capillary film grafted with peptide ligands for immunoadsorption.

A Sensitive Immunoassay Based on Electropolymerized Films by Capacitance Measurements for Direct Detection of Immunospecies

A Novel Capacitive Immunosensor Using Electropolymerized Insulating Poly (o‐phenylenediamine) Film on a Glass Carbon Electrode for Probing Transferrin

Sensitive amperometric immunosensing using polypyrrolepropylic acid films for biomolecule immobilization.

A reusable piezo-immunosensor with amplified sensitivity for ceruloplasmin based on plasma-polymerized film.

Capacitance Polypyrrole‐based Impedimetric Immunosensor for Interleukin‐10 Cytokine Detection

The Integration of Gold Nanoparticles with Semi-Conductive Oligomer Layer for Development of Capacitive Immunosensor

A New Antibody Immobilization Strategy Based on Electrodeposition of Nanometer-Sized Hydroxyapatite for Label-Free Capacitive Immunosensor

Poly(pyrrole-co-pyrrole propylic acid) film and its application in label-free surface plasmon resonance immunosensors.

An in situ electrochemical surface plasmon resonance immunosensor with polypyrrole propylic acid film: comparison between SPR and electrochemical responses from polymer formation to protein immunosensing.

A Novel Igm Immunosensor Based On The Plasma-Polymerized Film And Nano-Au Self-Assembled Monolayer Techniques

Modification of Amorphous Poly(ethylene Terephthalate) Surface by UV Light and Plasma for Fabrication of an Electrophoresis Chip with an Integrated Gold Microelectrode

A Novel Approach of Antibody Immobilization Based on N-Butyl Amine Plasma-Polymerized Films for Immunosensors

A Novel Capacitive Immunosensor Based on Gold Colloid Monolayers Associated with a Sol–gel Matrix

Highly Sensitive Electrochemical Detection of Immunospecies Based on Combination of Fc Label and PPD Film/gold Nanoparticle Amplification.

An amperometric immunosensor with a DNA polyion complex membrane/gold nanoparticles-backbone for antibody immobilisation

Capacitive Biosensor for Glutathione Detection Based on Electropolymerized Molecularly Imprinted Polymer and Kinetic Investigation of the Recognition Process

Preparation of Potentiornetric Immunosensor Based on Poly (O-Phenylenediamine) Film

A Reusable Capacitive Immunosensor Based on a CuS Ultrathin Film Constructed by Using a Surface Sol-Gel Technique

Amperometric Immunosensor For Carcinoembryonic Antigen Based On Poly(2,6-Pyridinediamine) Membrane And Gold Nanoparticles