Triple-Cation-Doped Li3V2(PO4)3 Cathode Material for Lithium Ion Batteries
Sun Xiao-Fei,Xu You-Long,Zheng Xiao-Yu,Meng Xiang-Fei,Ding Peng,Ren Hang,Li Long
DOI: https://doi.org/10.3866/pku.whxb201506082
2015-01-01
Abstract:Li3V2(PO4)(3) and its triple-cation-doped counterpart Li2.85Na0.15V1.9Al0.1(PO4)(2.9)F-0.1 were prepared by a conventional sol-gel method. The effect of Na-Al-F co-doping on the physicochemical properties, especially the electrochemical performance of Li3V2(PO4)(3), were investigated by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), electron energy loss spectroscopy (EELS), Raman spectroscopy, scanning electron microscopy (SEM), X-ray energy dispersive spectroscopy (EDS), galvanostatic charge/discharge, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). It was found that combined with surface coating from residual carbon, this triple-cation co-doping stabilizes the crystalline structure of Li3V2(PO4)(3), suppresses secondary particle agglomeration, and improves the electric conductivity. Moreover, reversible deinsertion/insertion of the third lithium ion at deeper charge/discharge is enabled by such doping. As a consequence, the practical electrochemical performance of Li3V2(PO4)(3) is significantly improved. The specific capacity of the doped material at a low rate of 1/9C is 172 mAh.g(-1) and it maintains 115 mAh.g(-1) at a rate of 14C, while the specific capacities of the undoped sample at 1/9C and 6C are only 141 and 98 mAh.g(-1), respectively. After 300 cycles at 1C rate, the doped material has a capacity of 118 mAh.g(-1), which is 32.6% higher than that of the undoped counterpart. It is also noteworthy that the multiplateau discharge curve of Li3V2(PO4)(3) transforms to a slope-like curve, indicating the possibility of a different lithium intercalation mechanism after this co-doping.