Abstract:Falling concrete blocks are serious problems in high-speed railway tunnels, and they cause delays of high-speed trains (HSTs) and even compromise driving safety. When HST-induced aerodynamic shockwaves propagate into cracks, the intensified pressure makes the cracks grow and connect, resulting in falling concrete blocks. In this study, the longitudinal, oblique and circumferential cracks at the tunnel vault are selected as representatives. The temporal, spatial and spectral characteristics of the aerodynamic pressure in the cracks are studied using the unsteady viscous k-ε turbulence model. The aerodynamic intensification effect in the lining crack is also revealed. Results show that the maximum pressure of the circumferential crack is 1.51 and 1.37 times that of the longitudinal and oblique cracks, respectively. On the basis of the results of soil–tunnel–crack models established in ABAQUS, two response surface models (RSMs) are established to quantify the effects of important factors, including crack length, crack depth, crack width, incident angle of the aerodynamic shockwave and train velocity, on the maximum tensile strain of the crack tip of circumferential cracks. Train velocity exerts the greatest influence on the maximum tensile strain in the circumferential crack, followed by crack width. Moreover, a field measurement is performed to investigate the dynamic strain of crack tips under train-induced aerodynamic loads and verify the proposed RSM. The maximum tensile strain caused by aerodynamic pressure is approximately 0.31–0.86 times of the maximum tensile strain of concrete. The proposed RSM can realise a reasonable prediction of the dynamic strain of crack tips. This research may be valuable for analysing the crack tip stability of tunnel lining cracks and guaranteeing the structural health of high-speed railway tunnels.

The experimental and numerical studies on arrest process of a running crack

Crack arrest characteristics and dynamic fracture parameters of moving cracks encountering double holes under impact loads

The Analysis Of Crack-Propagation And Arrest By Moving Element Method

STUDY ON CLOSING LAW OF CRACK IN ROCK MASS UNDER COMPRESSION

Crack dynamic propagation properties and arrest mechanism under impact loading

Numerical study on crack propagation under explosive loads

Crack arrest in rupturing steel gas pipelines

Analysis and design of mechanical crack arrestors for gas pipeline

Aerodynamic intensification effect and dynamic response of cracks on high-speed railway tunnel linings

A Finite Element Model for Crack Arrestor Design in Gas Pipelines

Study of the coupling effect of elliptical cavities and cracks on tunnel stability under dynamic loads

Experimental and Numerical Investigations on Crack Intersection and Propagation of Concrete Structures

Numerical Investigation on Cracking Behavior of Shield Tunnel Lining Subjected to Surface Loading: A Parametric Study

Experiments and simulation on the propagation of the juncture crack between gravel and mortar*

Numerical simulation on the dynamic mechanical response and fracture mechanism of rocks containing a single hole

Investigation of the interaction mechanism of two dynamic propagating cracks under blast loading

EXPERIMENTAL RESEARCH AND NUMERICAL SIMULATION OF 3D MULTI-DIRECTIONAL CRACKING IN RC BEAM

Numerical Analysis of Crack under Compression by 3D Displacement Discontinuity Method

Influence of multiple random variables on the safety of cracked tunnels under earthquake action

The influence of circular cavity on the characteristics of dynamic crack propagation in rocks using a single notch triangle approach

Stresses, deformations and porosities in standard fracture specimens