Abstract:Using a novel technique, crosslinked gel polymer electrolytes (GPEs) designed for lithium-ion battery applications have been created. To form the photo crosslink via free-radical polymerization, a mixture of polyurethane acrylate (PUA), polyurethane methacrylate (PUMA), vinyl phosphonic acid (VPA), and bis[2-(methacryloyloxy)ethyl] phosphate (BMEP) was exposed to ultraviolet (UV) radiation during the fabrication process. The unique crosslinked configuration of the membrane increased its stability and made it suitable for use with liquid electrolytes. The resulting GPE has a much higher ionic conductivity (1.83 × 10−3 S cm−1) than the commercially available Celgrad2500 separator. A crosslinked structure formed by the hydrophilic properties of the PUA-PUMA blend and the higher phosphate content from BMEP reduced the leakage of the electrolyte solution while at the same time providing a greater capacity for liquid retention, significantly improving the mechanical and thermal stability of the membrane. GPP2 shows electrochemical stability up to 3.78 V. The coin cell that was assembled with a LiFePO4 cathode had remarkable cycling characteristics and generated a high reversible capacity of 149 mA h g−1 at 0.1 C. It also managed to maintain a consistent Coulombic efficiency of almost 100%. Furthermore, 91.5% of the original discharge capacity was maintained. However, the improved ionic conductivity, superior electrochemical performance, and high safety of GPEs hold great promise for the development of flexible energy storage systems in the future.

PEU-based Gel Polymer Electrolytes for Lithium-Ion Batteries

Effects of PDMS with Polyether Side Chains on the Fluoropolymer Based Gel Lithium Electrolytes

Fumed silica-doped poly(butyl methacrylate-styrene)-based gel polymer electrolyte for lithium ion battery

Crosslinked poly(acrylonitrile–glycidyl methacrylate) as a novel gel polymer electrolyte

Abundant Hydrogen Bonds Formed in a Urea‐Based Gel Polymer Electrolyte Improve Interfacial Stability in Lithium Metal Batteries

[Microbiology on filter membrane. New technic adapted to tissue bacteriology].

In situ prepared poly(ether-ester)-based gel polymer electrolytes for high-performance lithium metal batteries

Supramolecular Network Structured Gel Polymer Electrolyte with High Ionic Conductivity for Lithium Metal Batteries

Electrochemically Stable Poly (Vinylidene Fluoride)-Polyurethane Polymer Gel Electrolytes with Polar β-Phase in Lithium Batteries

Synthesis and Characterization of Gel Polymer Electrolyte Based on Epoxy Group via Cationic Ring-Open Polymerization for Lithium-Ion Battery

Co-blending based tribasic PEO-PS-PMMA gel polymer electrolyte for quasi-solid-state lithium metal batteries

Crosslinked Gel Polymer Electrolyte from Trimethylolpropane Triglycidyl Ether by In Situ Polymerization for Lithium-Ion Batteries

In-situ Crosslinked Gel Polymer Electrolytes Based on Ionic Monomers as Charge Carriers for Lithium-Ion Batteries

Preparation and Properties of a High-Performance EOEOEA-Based Gel-Polymer-Electrolyte Lithium Battery

In-Situ Formed Phosphorus Modified Gel Polymer Electrolyte with Good Flame Retardancy and Cycling Stability for Rechargeable Lithium Batteries

Enhanced Electrochemical Properties of Gel Polymer Electrolyte with Hybrid Copolymer of Organic Palygorskite and Methyl Methacrylate

Photo-Crosslinked Polyurethane—Containing Gel Polymer Electrolytes via Free-Radical Polymerization Method

A novel polymer electrolyte based on PMAML/PVDF-HFP blend

Preparation of Porous, Chemically Cross-Linked, PVdF-based Gel Polymer Electrolytes for Rechargeable Lithium Batteries

UV-curable PVdF-HFP-based gel electrolytes with semi-interpenetrating polymer network for dendrite-free Lithium metal batteries