Abstract:The calculation of main circuit parameters is an important constituent part in the design of HVDC transmission projects. Each pole of the ±800 kV 7500 MW DC power transmission project from Xiluodu to Zhexi is composed of two series connected 12-pulse converters, thus the operation modes of the DC transmission project can be flexibly regulated. According to the theory of UHVDC power transmission and the features of DC system, main circuit parameters of the DC transmission project is studied and designed. Following main design parameters of converter stations at both ends of the DC transmission project are obtained from the calculation results: inductance of smoothing reactor for each pole of each station is 4×75 mH, this 4×75 mH inductance is splitted into two equal parts, one part is connected to pole bus and the other is connected to neutral bus; the converter transformers are composed of single-phase two-winding transformers, at Xiluodu side the rated capacity of each single-phase transformer is 378.5 MVA and its rated phase voltage is 171.3 kV and at Zhexi side the rated capacity of each single-phase transformer is 358.4 MVA and its rated phase voltage is 162.2 kV, the short-circuit impedances of converter transformer are 19% for both ends of the project while the tap changer is not adjusted; the number of transformer taps is set to +21/-6 at Xiluodu side and +24/-4 at Zhexi side, and voltage difference between two adjacent taps is 1.25% of the rated votlage at both sides; the absolute maximum no-load DC voltage 239.0 kV at Xiluodu side and 227.0 kV at Zhexi side. These data can be used as the foundation for subsequent research item of this project and is available for reference to other UHVDC transmission projects.

Study and Design of Auxiliary converter of SS3B Electric locomotive

Design and Experiments of Current Source Converters Power Control for Superconducting Magnetic Energy Storage System

Control Design of a Bi-directional DC/DC Converter for Electric Vehicle

Study of a Single-stage Three-phase PFC DC/DC Converter With Series-parallel Connected Transforms

Design of a Power Supply Module for Electric Vehicle Charging Station

Analyses and Design of a High Power Bidirectional 48V-12V DCDC Converter System for Electric Vehicle Application.

Multi-Functional Bidirectional AC/DC T-type 3-Level Converter for Super UPS

An Integrated Design of Power Converters for Electric Vehicles.

Control of Bi-directional DC/DC Converter for Auxiliary Power System Application of Electric Vehicle

Research and Application of Matlab/Simulink Simulation Model for the Train Auxiliary Converter

Design of 50kva Inverter for Electric Locomotive Air Conditioner

Design of auxiliary power supply for operation power module of power system

The Design of Auxiliary Power Supply with Wide Range and High Input Voltage

Review on the Technology of on Board DC/DC Conversion for EV Application

Study and design of main circuit parameters for ±800 kv/7500 MW DC power transmission project from Xiluodu to Zhexi

Research on Intelligent Auxiliary Control System Based on Convertor Station

High-speed Traction Power Supply System Modeling and the Simulation Analysis

Design and development of single-phase inverter for locomotives based on SVPWM

The Design of Small Vehicle Auxiliary Power Supply

Research and application of traction converter for electric locomotive in heavy haul railway

Application of Matrix Converter in Auxiliary Drive System for Diesel Locomotives