Abstract:Abstract Tight gas plays an important role in the increasing production of natural gas. Staged hydraulic fracturing has been a key technology to make recovery of tight gas economically viable. The JP formation of Western-Sichuan Gas Field is a typically tight gas reservoir with horizontal wells. However, the optimization design of staged fracturing encountered two challenges: Low porosity-low permeability with non-Darcy effect; High heterogeneity with discontinuous distribution of sand bodies and properties variation in the longitudinal direction. The traditional optimization method based on Darcy flow and homogeneous model is not capable in the optimization of fracturing parameters (spacing, length and conductivity) and perforation position. This paper presents a new design method of "one strategy for one well" with better economical results. Firstly, non-Darcy flow character was measured by laboratory displacement experiment. The relationship between pseudo threshold pressure gradient (pseudo TPG) and permeability was fitted based on quasi-linear flow with pseudo TPG. Secondly, long horizontal section heterogeneous reservoir models were built on the basis of log and geological interpretation, which involves homogeneous continuous model, interbedding model with barrier and heterogeneous model composed of different seepage units. With barriers and seepage units located, fracture parameters include fracture spacing, length and conductivity were optimized for the goal of best economical production with numerical simulation. Thirdly, a model of induced stress from hydraulic fractures was established based on displacement discontinuity theory. Combined with the optimal fracture spacing, the best perforation position was located with the target of low initiation pressure. Lastly, based on fractures parameters and perforation positions, the operation parameters are designed. The new design method has been successfully applied to 21 horizontal wells with staged fracturing. Microseismic fracture mapping is conducted to evaluate fractures geometry. The results of post-fracture analysis and post-production evaluation demonstrate the benefits of this new optimization method.

Optimization Numerical Simulation Study on Miscible Gas Flood in Pubei Oilfield

Using Cyclic Injection-production Technology to Improve the Development Effect of Water Flooding in Ultra-high Water Cut Stage

Numerical Simulation Study on Optimization of Development Parameters of Condensate Gas Reservoirs

Integrated numerical simulation of hydraulic fracturing and production in shale gas well considering gas-water two-phase flow

Study on the Critical Production Calculation Method of the Water-Flooding Reservoir with Gas Cap

Automatic Optimization of Multi-Well Multi-Stage Fracturing Treatments Combining Geomechanical Simulation, Reservoir Simulation and Intelligent Algorithm

Optimization of CO2 EOR and geological sequestration in high-water cut oil reservoirs

MD-CFD simulation on the miscible displacement process of hydrocarbon gas flooding under deep reservoir conditions

Quantitative optimization of drainage strategy of coalbed methane well based on the dynamic behavior of coal reservoir permeability

A New Method for Optimizing Water-Flooding Strategies in Multi-Layer Sandstone Reservoirs

Study on Mechanism and Features of Unstable-State Displacement of Miscible Hydrocarbon-Gas Flooding

The effect of gas injection velocity and pore morphology on displacement mechanisms in porous media based on CFD approach

Establishment of Stability Evaluation Criteria for the Oil–Gas Interface during Gas-Cap Gravity Flooding in Oil Reservoirs with Strong Edge-Water Drive

Experimental and Numerical Simulation Studies on the Synergistic Design of Gas Injection and Extraction Reservoirs of Condensate Gas Reservoir-Based Underground Gas Storage

Pore-Scale Simulation of Particle Flooding for Enhancing Oil Recovery

Physical simulation experiments of remaining oil distribution and production in alluvial fans controlled by dynamic and static factors

Research on Geological-Engineering Integration Numerical Simulation Based on EUR Maximization Objective

Optimization of Staged-Fracturing in Heterogeneous Tight Gas Reservoirs of Western-Sichuan Gas Field

Numerical Simulation of Well Type Optimization in Tridimensional Development of Multi-Layer Shale Gas Reservoir

Optimization of CO2 immiscible injection incomplex low permeability reservoir

The Three-Dimensional Heterogeneous Simulation Study of CO2 Flooding in Low-Permeability Reservoirs