The constant-pressure molecular dynamics for finite systems and its applications

D. Y. Sun,X. G. Gong

DOI: https://doi.org/10.48550/arxiv.0802.0067

2008-01-01

Abstract:Recently we proposed a new constant-pressure molecular dynamics method for finite systems. In this paper, we discuss the current understanding of this method and its technique details. We also review the recent theoretical advances of nano-system under pressure by using this method.

What problem does this paper attempt to address?

LETTER TO THE EDITOR: A New Constant-Pressure Molecular Dynamics Method for Finite Systems

Dongmei Sun,X. G. Gong

DOI: https://doi.org/10.1088/0953-8984/14/26/101

2002-01-01

Journal of Physics Condensed Matter

Abstract:We present a new method for constant-pressure molecular dynamics simulation which is parameter free. This method is especially appropriate for finite systems in which a periodic boundary condition does not apply. Simulations on carbon nanotubes and Ni nanoparticles clearly demonstrate the validity of the method, from which we can also easily obtain the equations of states for a finite system under external pressure.
Ab- Initio Molecular Dynamics Simulation on Nano-System under External Pressure

Min Ji,Deyan Sun,Xingao Gong

DOI: https://doi.org/10.1360/04za0008

2004-01-01

Science in China Series A Mathematics

Abstract:A new constant-pressure molecular dynamics (MD) method is developed to simulate the dynamic behavior and structure transition of finite system under external pressure. In this method, no artificial parameter is introduced and the computation overheads are very small. As an application, a hard-soft transition of single wall carbon nanotube (SWCNT) under external pressure is found, which is in agreement with the experiments.
Molecular dynamics simulations on the adsorption and surface phenomena of simple fluid in porous media

Hui Zhang,Bing-jian Zhang,Jinwei Lu,Shiqiang Liang

DOI: https://doi.org/10.1016/S0009-2614(02)01509-9

IF: 2.719

2002-01-01

Chemical Physics Letters

Abstract:Equilibrium molecular dynamics simulations have been used to investigate the fluid adsorption phenomena and calculate the surface tension in porous media at different temperatures, densities and pore widths. The facts that most of the fluid particles are adsorbed adherent to the pore walls and the surface forms near the walls have been found, and that the surface is not stable which means there exists an oscillation phenomenon in pores have been also found. The surface tension in pores is much bigger than that in macrovolume systems like normal liquid–liquid and liquid–vapor interfaces, and it will increase with the increase of density and pore width, but will decrease with the increase of temperature.
Constant Pressure Molecular Dynamics Simulation for Ionic System

Zhiwei Cui,Yi Sun,Jianmin Qu

DOI: https://doi.org/10.1166/jctn.2008.842

2008-01-01

Journal of Computational and Theoretical Nanoscience

Abstract:We present in this work a novel application of constant pressure molecular dynamics method (MID) that allows shape variation of MID cells. The new pressostat method, based on metric-tensor flexible-cell algorithm that has patched the drawbacks of the original P-R algorithm, is extended to address the long range charge-charge interaction in ionic systems by combining its usage with the Ewald summation method. It can reflect the underlying oscillation of the MID cells by releasing the constraint of fixed shape of the simulation box, which was not resolved successfully by other methods previously. We also show that when equipped with the Nose-Poincare thermostat algorithm, the new method can properly describe the evolution of the system in isothermal- isobaric (NPT) ensemble. The reliability of the new method is verified by the results from its application on solid NaCl at given temperatures and pressures. Other applications on the phase transition of ZrO2 from tetragonal to cubic reveals that the effective axial ratio of (a+b)/2c changes from 0.922 to 1, showing a good match to that from experimental measurement. The new algorithm has potential applications to other ionic systems to obtain various material properties.
Ultrafast Dynamics under High-Pressure

Hongyu Tu,Lingyun Pan,Hongjian Qi,Shuhao Zhang,Fangfei Li,Chenglin Sun,Xin Wang,Tian Cui

DOI: https://doi.org/10.1088/1361-648x/acc376

2023-01-01

Abstract:High-pressure is a mechanical method to regulate the structure and internal interaction of materials. Therefore, observation of properties' change can be realized in a relatively pure environment. Furthermore, high-pressure affects the delocalization of wavefunction among materials' atoms and thus their dynamics process. Dynamics results are essential data for understanding the physical and chemical characteristics, which is valuable for materials application and development. Ultrafast spectroscopy is a powerful tool to investigate dynamics process and becoming a necessary characterization method for materials investigation. The combination of high-pressure with ultrafast spectroscopy in the nanocosecond similar to femtosecond scale enables us to investigate the influence of the enhanced interaction between particles on the physical and chemical properties of materials, such as energy transfer, charge transfer, Auger recombination, etc. Base on this point of view, this review summarizes recent progress in the ultrafast dynamics under high-pressure for various materials, in which new phenomena and new mechanisms are observed. In this review, we describe in detail the principles of in situ high pressure ultrafast dynamics probing technology and its field of application. On this basis, the progress of the study of dynamic processes under high-pressure in different material systems is summarized. An outlook on in situ high-pressure ultrafast dynamics research is also provided.
Constant pressure and temperature discrete-time Langevin molecular dynamics

Niels Grønbech-Jensen,Oded Farago

DOI: https://doi.org/10.1063/1.4901303

2014-11-13

Abstract:We present a new and improved method for simultaneous control of temperature and pressure in molecular dynamics simulations with periodic boundary conditions. The thermostat-barostat equations are build on our previously developed stochastic thermostat, which has been shown to provide correct statistical configurational sampling for any time step that yields stable trajectories. Here, we extend the method and develop a set of discrete-time equations of motion for both particle dynamics and system volume in order to seek pressure control that is insensitive to the choice of the numerical time step. The resulting method is simple, practical, and efficient. The method is demonstrated through direct numerical simulations of two characteristic model systems - a one dimensional particle chain for which exact statistical results can be obtained and used as benchmarks, and a three dimensional system of Lennard-Jones interacting particles simulated in both solid and liquid phases. The results, which are compared against the method of Kolb & Dunweg, show that the new method behaves according to the objective, namely that acquired statistical averages and fluctuations of configurational measures are accurate and robust against the chosen time step applied to the simulation.

Statistical Mechanics,Materials Science,Soft Condensed Matter,Computational Physics
Hybrid Particle-Field Molecular Dynamics Under Constant Pressure

Sigbjørn Løland Bore,Hima Bindu Kolli,Antonio De Nicola,Maksym Byshkin,Toshihiro Kawakatsu,Giuseppe Milano,Michele Cascella

DOI: https://doi.org/10.1063/5.0007445

2020-03-12

Abstract:Hybrid particle-field methods are computationally efficient approaches for modelling soft matter systems. So far applications of these methodologies have been limited to constant volume conditions. Here, we reformulate particle-field interactions to represent systems coupled to constant external pressure. First, we show that the commonly used particle-field energy functional can be modified to model and parameterize the isotropic contributions to the pressure tensor without interfering with the microscopic forces on the particles. Second, we employ a square gradient particle-field interaction term to model non-isotropic contributions to the pressure tensor, such as in surface tension phenomena. This formulation is implemented within the hybrid particle-field molecular dynamics approach and is tested on a series of model systems. Simulations of a homogeneous water box demonstrate that it is possible to parameterize the equation of state to reproduce any target density for a given external pressure. Moreover, the same parameterization is transferable to systems of similar coarse-grained mapping resolution. Finally, we evaluate the feasibility of the proposed approach on coarse-grained models of phospholipids, finding that the term between water and the lipid hydrocarbon tails is alone sufficient to reproduce the experimental area per lipid in constant-pressure simulations, and to produce a qualitatively correct lateral pressure profile.

Soft Condensed Matter
Comparative Study of the Water Response to External Force at Nanoscale and Mesoscale

H. T. Liu,Z. Chen,S. Jiang,Y. Gan,M. B. Liu,J. Z. Chang,Z. H. Tong

DOI: https://doi.org/10.3970/cmes.2013.095.303

2013-01-01

Abstract:Dissipative particle dynamics (DPD) and molecular dynamics (MD) are both Lagrangian particle-based methods with similar equations except that the DPD specification for the force definition on the particles is the result of coarsegraining, and these two methods usually get the similar results in some specific cases. However, there are still some unknown differences between them. Considering the water response to external force, a comparative study of DPD and MD is conducted in this paper, which provides a better understanding on their relation, and a potential way to effectively bridge nanoscale and mesoscale simulation procedures. It is shown that there is a scale effect on the water response to external force between MD and DPD, and that the size effect exists only in MD simulations.
Nanoconfined Gas Kinetic Modelling and Transport Mechanisms

Shan Baochao,Wang Runxi,Zhang Yonghao,Guo Zhaoli

DOI: https://doi.org/10.1360/sspma-2023-0325

2024-01-01

Abstract:The gas kinetic theory explains macroscopic fluid properties based on microscopic molecular interactions, and has wideapplications in aerospace technologies, microelectromechanical systems, and industrial processes. The Boltzmann equa-tion only applies to dilute (ideal) gases as it ignores the gas molecule size and molecular interactions other than binarycollision. Starting from the Boltzmann equation, the transport mechanisms of dilute, dense, real, and nanoconfined gasesare discussed along with their boundary conditions. Compared with other gas kinetic models, the nanoconfined gas kineticmodel produces results consistent with those of the molecular dynamics simulations at the microscopic level and recoversthe continuum fluid dynamics when the nonequilibrium, real gas, and confinement effects are negligible. Slip dynamics,real gas effects, and transport mechanisms of nanoconfined gases are numerically analysed. Finally, the limitations andpossible directions of nanoconfined gas kinetic modelling are briefly discussed.
Applicability of molecular dynamics method to the pressure-driven gas flow in finite length nano-scale slit pores

fubing bao,yuanlin huang,limin qiu,jianzhong lin

DOI: https://doi.org/10.1080/00268976.2014.960495

2015-01-01

Molecular Physics

Abstract:This study investigates the applicability of the molecular dynamics (MD) method to the pressure-driven gas flow in finite length nano-scale slit pores. The reflecting particle membrane is introduced to induce a pressure difference between the inlet and outlet. The flow properties are compared with those of the Burnett equations. The inlet and outlet pressures, as well as the mass flow rate in these two simulations are maintained the same by adjusting the tangential momentum accommodation coefficient in the Burnett simulation, which is found to be between 0.4 and 0.5. Qualitative and quantitative agreements are observed between the MD and Burnett simulation results in the bulk of the pore for both streamwise distributions and cross-section profiles. The MD simulation shows an advantage in the near-wall region, in which the wall force field dominates flow behaviour. This study indicates that MD simulation can be used to describe the pressure-driven gas flow characteristics in finite length nano-scale slit pores.
Multiscale Simulation of the Responses of Discrete Nanostructures to Extreme Loading Conditions Based on the Material Point Method

Shan Jiang,Zhen Chen,Thomas D. Sewell,Yong Gan

DOI: https://doi.org/10.1016/j.cma.2015.08.009

IF: 6.588

2015-01-01

Computer Methods in Applied Mechanics and Engineering

Abstract:A particle-based multiscale simulation procedure is being developed that includes a concurrent link between the Material Point Method (MPM) and Dissipative Particle Dynamics (DPD) and a hierarchical bridge from Molecular Dynamics (MD) to DPD. In this paper, an interfacial scheme is presented that can be used to effectively cast spatial discretization at different scales into a unified MPM framework. The advantage to the approach is that the interactions among discrete nanostructures under extreme loading conditions can be simulated without the need for master/slave nodes as required in the Finite Element Method and other similar mesh-based methods. The proposed multiscale simulation scheme is applied to representative cases: tensile extension of a single nanobar, isothermal compression of a cube-shaped nanoparticle in a high-pressure fluid, and the behavior of nanosphere pairs and nanosphere–nanorod assemblies in a confining fluid for different initial arrangements of the components. The concurrent DPD/MPM results are in good qualitative agreement with the predictions obtained using a DPD-only description and all-atom MD, but require much less computational time as compared to all-atom simulations.
Molecular Dynamics Study of Radial Pressure Transmission in Multiwalled Carbon Nanotubes

X. Ye,D. Y. Sun,X. G. Gong

DOI: https://doi.org/10.1103/physrevb.75.073406

IF: 3.7

2007-01-01

Physical Review B

Abstract:The pressure response of multiwalled carbon nanotubes MWCNTs to the radial hydrostatic pressure is studied by using constant pressure molecular dynamics simulations for finite systems. The inner tube is effectively protected by the outer tube against the external pressure. The pressure transmission efficiency of MWCNTs depends upon both the size and morphology combination of the tubes. The larger the tube is, the higher the pressure transmission efficiency will be. The pressure transmission in commensurate MWCNTs is more efficient than that in incommensurate ones. Based on the present simulations, an experimental method is suggested for measuring the pressure transmission efficiency of MWCNTs.
Pressure Control in Dissipative Particle Dynamics and Its Application in Simulating Micro- and Nano-Bubbles

Yuqing Lin,Jiaming Li,Dingyi Pan

2017-01-01

Abstract:The interest of studying property as a function of temperatures and pressures is much more extensive than the interest of using volume and energy as the independent variables. In dissipative particle dynamics [1] (DPD) and many-body DPD (MDPD) [2], a natural thermostat has been already incorporated. Therefore, the barostat for pressure control could be a very important part for the (M)DPD application. In current work, the Berendsen barostat [3] from molecular dynamics simulation is applied in both DPD and MDPD simulations. The original Berendsen barostat works well in (M)DPD simulation of single-component system under constant pressure condition and in non-equilibrium dynamic processes. The novel partial Berendsen barostat is proposed for multi-component system simulation with (M)DPD. The displacement rescaling process of Berendsen barostat is only applied on the particles outside the center region, acting as a pressure ‘boundary condition’. The center part forms the free zone, in which the interface shape, non-equilibrium dynamic behavior between different phases can be captured properly. Immiscible bubble in the second fluid under constant pressure condition is studied, and the oscillation of bubble radius and fluctuation of system pressure can be obtained by current barostat. Preliminary models for bubble growing and collapsing under square pressure wave and bubble oscillation under harmonic pressure wave are also reported in current simulation. It shows that the partial Berendsen barostat is suitable for the modeling of non-equilibrium process of single or few droplets/bubbles in multi-component systems.
A Novel Pressure-Controlled Molecular Dynamics Simulation Method for Nanoscale Boiling Heat Transfer

Cong Wang,Yalong Kong,Zhigang Liu,Lin Guo,Yawei Yang

DOI: https://doi.org/10.3390/en16052131

IF: 3.2

2023-01-01

Energies

Abstract:Pool boiling, enabling remarkable phase-change heat transfer, has elicited increasing attention due to its ubiquitous applications in solar thermal power stations. An explicit understanding of the effect of system pressure on pool boiling is required to enhance the phase-change heat transfer. Despite its wide application when exploring the potential mechanism of boiling, the molecular dynamics method still needs to be improved when discussing the working mechanism of system pressure. Therefore, in the present study, a novel molecular dynamics simulation method of nanoscale pool boiling was proposed. This method provides a way to change and control pressure during the phase-change process. Furthermore, the bubble nucleation and growth in nanoscale pool boiling are quantitatively investigated through pressure-control molecular dynamics simulations. We expect that this study will improve the present simulation method of pool boiling and provide useful insights to the physics of the process.
Molecular Dynamics Simulation and Its Application in the Materials Science

ZHAO Su,LI Jinfu,ZHOU Yaohe

DOI: https://doi.org/10.3321/j.issn:1005-023X.2007.04.002

2007-01-01

Abstract:The progress in molecular dynamics simulation is reviewed. The contents comprise the classification and principle of molecular dynamics, the interatomic potential, the related finite difference technique, the choice of initial and boundary conditions, the realization and control of equilibrium ensembles, the extraction of useful information and some applications in the materials science.
Investigation of pressure-driven gas flows in nanoscale channels using molecular dynamics simulation

Fubing Bao,Yuanlin Huang,Yonghao Zhang,Jianzhong Lin

DOI: https://doi.org/10.1007/s10404-014-1498-4

2014-10-24

Microfluidics and Nanofluidics

Abstract:AbstractPressure-driven gas flows in nanoscale channels are investigated in the present study using a molecular dynamics method. A reflecting particle membrane is used to produce the pressure difference between the inlet and outlet. The ratio of pressure difference to the average pressure along the channel is studied in detail, which is independent of the Knudsen number and temperature, but increases with the membrane’s reflecting probability and channel aspect ratio. A scaling law for the pressure ratio is obtained from the simulation results, to determine the membrane’s reflecting probability in molecular dynamics simulation, so the required pressure difference over a given channel can be produced. A case study of backward-facing step flow is then conducted, which demonstrates the necessity of using the pressure-driven method in non-uniform cross-sectional flow.

physics, fluids & plasmas,nanoscience & nanotechnology,instruments & instrumentation
Constant-pH Molecular Dynamics Simulations for Large Biomolecular Systems.

Brian K Radak,Christophe Chipot,Donghyuk Suh,Sunhwan Jo,Wei Jiang,James C Phillips,Klaus Schulten,Benoît Roux

DOI: https://doi.org/10.1021/acs.jctc.7b00875

2017-01-01

Journal of Chemical Theory and Computation

Abstract:An increasingly important endeavor is to develop computational strategies that enable molecular dynamics (MD) simulations of biomolecular systems with spontaneous changes in protonation states under conditions of constant pH. The present work describes our efforts to implement the powerful constant-pH MD simulation method, based on a hybrid nonequilibrium MD/Monte Carlo (neMD/MC) technique within the highly scalable program NAMD. The constant-pH hybrid neMD/MC method has several appealing features; it samples the correct semigrand canonical ensemble rigorously, the computational cost increases linearly with the number of titratable sites, and it is applicable to explicit solvent simulations. The present implementation of the constant-pH hybrid neMD/MC in NAMD is designed to handle a wide range of biomolecular systems with no constraints on the choice of force field. Furthermore, the sampling efficiency can be adaptively improved on-the-fly by adjusting algorithmic parameters during the simulation. Illustrative examples emphasizing medium- and large-scale applications on next-generation supercomputing architectures are provided.
Methods of Pressure for Fluid Systems with Periodic Boundary Conditions in Molecular Dynamics

郭英奎,梁新刚,过增元

DOI: https://doi.org/10.3321/j.issn:1000-0054.2001.04.023

2001-01-01

Abstract:For fluid molecular dynamics system with periodic boundary conditions and nearest image convention there are two different methods to calculate the pressure. There is no literature found given a thorough proof for the applicability. And the applicability of Virial theorem is not clear either. In this paper the underlying assumptions of the methods are examined. For the considered molecular dynamics system, it is shown that the Virial theorem does not hold. The derivation of pressure calculation equations for the considered molecular dynamics system by averaging the pressure on a series of imaginary planes in the system is presented in detail. The result equations are coincident with one of the two methods in literatures. The numerical results for several liquid states of argon are given to show the Virial theorem does not hold and the comparison of calculated pressure by the two methods and experimental values. The mistiness in calculation method of pressure for the considered MDS system is thoroughly cleared.
Molecular Dynamics–continuum Hybrid Simulation for Condensation of Gas Flow in a Microchannel

Jie Sun,Ya-Ling He,Wen-Quan Tao

DOI: https://doi.org/10.1007/s10404-008-0394-1

2009-01-01

Microfluidics and Nanofluidics

Abstract:A molecular dynamics-continuum coupling method combining fluid flow and heat transfer is developed to study the condensation process of gas flow in a microchannel. The computational domain is decomposed into particle (P), continuum (C) and overlap (O) regions with solving approaches of molecular dynamics simulation, finite volume method and the developed coupling method, respectively. Continuities of momentum and energy in O region are ensured by constraint dynamics and the Langevin method. The validity of the developed method is confirmed by a good agreement between hybrid results and analytical solutions from two cases including the unsteady dynamical and thermal problems. For the condensation process of gas flow, the hybrid transient velocity and temperature fields indicate that the process does not progress smoothly but wavily with noticeable fluctuation, leading to oscillation in temperature field and recirculation flow in velocity field. Analysis based on heat and mass transfer is carried out in P region, and the Kapitza resistance and the thermal conductivity in liquid are obtained with the satisfying agreement with experimental data, which shows the availability of the developed model for the investigation on the thermal boundary resistance. The good performance had demonstrated that the developed coupling method and computational model are available to provide a multiscale overview in dynamical and thermal problems including phase-transition from nanoscale to microscale, which will show significantly potential in micro fluidics and thermal engineering.
Constant-temperature molecular-dynamics algorithms for mixed hard-core/continuous potentials

Yao A. Houndonougbo,Brian B. Laird

DOI: https://doi.org/10.1063/1.1485072

IF: 4.304

2002-07-15

The Journal of Chemical Physics

Abstract:We present a set of second-order, time-reversible algorithms for the isothermal (NVT) molecular-dynamics (MD) simulation of systems with mixed hard-core/continuous potentials. The methods are generated by combining real-time Nosé thermostats with our previously developed Collision Verlet algorithm [Mol. Phys. 98, 309 (1999)] for constant energy MD simulation. In all we present five methods, one based on the Nosé–Hoover [Phys. Rev. A 31, 1695 (1985)] equations of motion and four based on the Nosé–Poincaré [J. Comput. Phys. 151, 114 (1999)] real-time formulation of Nosé dynamics. The methods are tested using a system of hard spheres with attractive tails and all correctly reproduce a canonical distribution of instantaneous temperature. The Nosé–Hoover based method and two of the Nosé–Poincaré methods are shown to have good energy conservation in long simulations.

The constant-pressure molecular dynamics for finite systems and its applications

LETTER TO THE EDITOR: A New Constant-Pressure Molecular Dynamics Method for Finite Systems

Ab- Initio Molecular Dynamics Simulation on Nano-System under External Pressure

Molecular dynamics simulations on the adsorption and surface phenomena of simple fluid in porous media

Constant Pressure Molecular Dynamics Simulation for Ionic System

Ultrafast Dynamics under High-Pressure

Constant pressure and temperature discrete-time Langevin molecular dynamics

Hybrid Particle-Field Molecular Dynamics Under Constant Pressure

Comparative Study of the Water Response to External Force at Nanoscale and Mesoscale

Nanoconfined Gas Kinetic Modelling and Transport Mechanisms

Applicability of molecular dynamics method to the pressure-driven gas flow in finite length nano-scale slit pores

Multiscale Simulation of the Responses of Discrete Nanostructures to Extreme Loading Conditions Based on the Material Point Method

Molecular Dynamics Study of Radial Pressure Transmission in Multiwalled Carbon Nanotubes

Pressure Control in Dissipative Particle Dynamics and Its Application in Simulating Micro- and Nano-Bubbles

A Novel Pressure-Controlled Molecular Dynamics Simulation Method for Nanoscale Boiling Heat Transfer

Molecular Dynamics Simulation and Its Application in the Materials Science

Investigation of pressure-driven gas flows in nanoscale channels using molecular dynamics simulation

Constant-pH Molecular Dynamics Simulations for Large Biomolecular Systems.

Methods of Pressure for Fluid Systems with Periodic Boundary Conditions in Molecular Dynamics

Molecular Dynamics–continuum Hybrid Simulation for Condensation of Gas Flow in a Microchannel

Constant-temperature molecular-dynamics algorithms for mixed hard-core/continuous potentials