Abstract:Accurate identification of dynamic displacements and mode shapes is essential for determining the operating conditions of super high-rise buildings. However, existing structural health monitoring studies typically rely on a limited number of sensors to investigate the individual direction responses, disregarding the overall behaviors, which is inadequate for super high-rise buildings with considerable flexibility. Furthermore, extended monitoring periods resulting in time delays restrict the possibility of using additional sensors for joint monitoring. Based on the theory of multi-sensor data fusion, this study provides a new solution to identify the overall dynamic displacements and mode shapes through fusing acceleration and inclination, both of which can be directly measured in the structural health monitoring system. First, the time delays extracted from the measured data are presented and classified into two groups to facilitate data processing. Then, a multi-sensor data fusion rule based on the similarity of signal components is proposed to establish the relationships between inclinometers and accelerometers of different types, heights, and orientations, and a signal synchronization algorithm based on cross-correlation theory is employed in terms of the fusion rule. The proposed algorithm and fusion method are effectively validated by numerical simulations in both synchronized and unsynchronized cases and compared with other displacement estimation methods. Finally, the fusion displacement is derived by fusing the synchronized inclination and acceleration using the Kalman filtering algorithm. A full-scale field experiment on the 632 m high Shanghai Tower is conducted to verify the applicability of the proposed method to actual super high-rise buildings. It is demonstrated that the fusion displacement derived from the measured data after synchronization exhibits excellent characteristics in both time and frequency domains. This is further evidenced by the successful identification of the two-dimensional dynamic displacements and the first nine mode shapes of the Shanghai Tower during the approach of Typhoon Krosa.

Data Fusion of Displacement and Acceleration Measurements Based on Multi-rate Kalman Filtering Technique

Variational Mode Decomposition-Based Multirate Data-Fusion Framework for Estimating Structural Dynamic Displacement by Integrating Vision- and Acceleration-Based Measurements

A new adaptive multi-rate Kalman filter for the data fusion of displacement and acceleration

Multi-Rate Data Fusion Based Kalman Filtering with Unknown Input for Online Estimation of Dynamic Displacements

Dynamic displacement estimation and modal analysis of long-span bridges integrating multi-GNSS and acceleration measurements

A Smart Multi-Rate Data Fusion Method for Displacement Reconstruction of Beam Structures

Multi-route fusion method of GNSS and accelerometer for structural health monitoring

Phase-Based Displacement Sensor with Improved Spatial Frequency Estimation and Data Fusion Strategy

Vision and Vibration Data Fusion-Based Structural Dynamic Displacement Measurement with Test Validation

Multi-sensor Data Fusion Using Adaptive Kalman Filter

Multi-sensor data fusion method based on adaptive Kalman filtering

Multi-sensor Data Fusion Algorithm Based on Fuzzy Adaptive Kalman Filter

Data Fusion Based Improved Kalman Filter with Unknown Inputs and Without Collocated Acceleration Measurements

Multi-rate Data Fusion for Dynamic Displacement Measurement of Beam-Like Supertall Structures Using Acceleration and Strain Sensors

Signal-based online acceleration and strain data fusion using B-splines and Kalman filter for full-field dynamic displacement estimation

Dynamic Data Process Algorithm of Accelerometer Based on Modified Adaptive Kalman Filter

Simulation of Multisensor Data Fusion Based on Iterative Kalman Filter

Inclination and Acceleration Data Fusion for Two-Dimensional Dynamic Displacements and Mode Shapes Identification of Super High-Rise Buildings Considering Time Delay

Multi-frequency Data Fusion Via Joint Weighted Deconvolution for Resolution Enhancement

Design and Implementation of an Integrated Array Accelerometer with Expanded Dynamic Range Based on Adaptive Data Selection Fusion

Displacement Reconstruction Based on Kalman Smoothing in Multi-Rate Suspension Health Monitoring Systems