Abstract:This study investigates the preparation of ultrahigh-strength AZ80 magnesium alloy bulks using room temperature multidirectional forging (MDF) at different strain rates. The focus is on elucidating the effects of multidirectional loading and strain rates on grain refinement and the subsequent impact on the mechanical properties of the AZ80 alloy. Unlike hot deformation, the alloy subjected to room temperature MDF exhibits a lamellar twinned structure with multi-scale interactions. The key to achieving effective room temperature MDF of the alloy lies in combining multidirectional loading with small forging strains per pass (6%). This approach not only maximizes the activation of twinning to accommodate deformation but ensures sufficient grain refinement. Microstructural analysis reveals that the evolution of the grain structure in the alloy during deformation results from the competition between {101 ̄2} twinning or twinning variant interactions and detwinning. Increasing the forging rate effectively activates more twin variants, and additional deformation passes significantly enhance twin interaction levels and dislocation density. Furthermore, at a higher strain rate, more pronounced dislocation accumulation facilitates the transformation of twin structures into high-angle grain boundaries, promoting texture dispersion and suppressing detwinning. The primary strengthening mechanisms in room temperature MDF samples are grain refinement and dislocation strengthening. While increased dislocation density raises yield strength, it reduces post-yield work hardening capacity. After two passes of MDF at a higher strain rate, the alloy achieves an optimal balance of strength and ductility, with a tensile strength of 462 MPa and an elongation of 5.1%, significantly outperforming hot-deformed magnesium alloys.

Grain Size and Texture Changes of Magnesium Alloy Az31 During Multi-Directional Forging

Formation of Fine Grained Structure in a Magnesium Alloy AZ31 During Multi-Directional Forging with Decreasing Deformation Temperature

Ultra-Fine Grain Development in an AZ31 Magnesium Alloy During Multi-Directional Forging under Decreasing Temperature Conditions

Severe Plastic Deformation by Multidirectional Forging Andmechanical Properties of Magnesium Alloy AZ31

Superplasticity of Fine-Grained Magnesium Alloy Az31 Processed by Multi-Directional Forging

Microstructures and Mechanical Properties of Az91 Magnesium Alloy Processed by Multidirectional Forging under Decreasing Temperature Conditions

Multidirectional Forging of AZ91 Magnesium Alloy and Its Effects on Microstructures and Mechanical Properties

Microstructure, Texture and Mechanical Properties of Extruded AZ31 Mg Alloy During Small Strain Multi-Directional Forging with Gradient Cooling

Microstructural Evolution and Mechanical Properties of Extruded AZ80 Magnesium Alloy during Room Temperature Multidirectional Forging Based on Twin Deformation Mode

Ultrafine grain evolution in Mg alloys, AZ31, AZ61, AZ91 by multi directional forging

Microstructures and mechanical properties of AZ61 magnesium alloy after isothermal multidirectional forging with increasing strain rate

Effect of Temperature and Strain Rate on the Grain Structure During the Multi-Directional Forging of the AlZnMgCu Alloy

Evolutions of Microstructure and Microtexture in Az21 Mg Alloy During Multi-Directional Forging under Decreasing Temperature Conditions

The quantitative effects of temperature and cumulative strain on the mechanical properties of hot-extruded AZ80 Mg alloy during multi-directional forging

Dynamic precipitation and its effect on grain refinement and mechanical properties in AZ61 Mg alloy during multi-directional forging under decreasing temperature conditions

Superplasticity of AZ31 Magnesium Alloy Processed by Severe Plastic Deformation

Simultaneously improving the deformation tolerance and mechanical properties of AZ80 magnesium alloy through the combination of pre-cryogenic and Multi-directional forging

Study on the plasticity improvement mechanism and grain refinement of AZ80 Mg alloy under cryogenic multi-directional forging

Microstructure, texture and mechanical properties of coarse-grained Mg–Gd–Y–Nd–Zr alloy processed by multidirectional forging

Enhanced Stretch Formability and Mechanical Properties of a Magnesium Alloy Processed by Cold Forging and Subsequent Annealing

Structural Development at Severely High Strain in AZ31 Magnesium Alloy Processed by Cold Forging and Subsequent Annealing