Abstract:Rheological behavior was examined for biocomposites of rod-like silk fibroin (SF) fiber and poly(epsilon-caprolactone) (PCL) to investigate an effect(s) of the SF fiber network therein on the mechanical properties. At 160 degrees C where PCL was a homogeneous melt, linear viscoelastic tests revealed that the SF/PCL composites hardly relax to behave essentially as elastic solids (more precisely, plastic solids before yielding) at low frequencies. The corresponding equilibrium modulus Go increased strongly with the SF volume fraction phi(SF) (G(0) similar to phi(4.4)(SF)) and was attributable to the elastic bending of the SF fibers incorporated in the network. The Doi-Kuzuu model for non-Brownian rods was modified for the SF/PCL composites by incorporating the rod-rod contact at equilibrium. The Go calculated from this model was satisfactorily close to the data, in both phi(SF) dependence and magnitude, lending support to the assignment of the composite elasticity to the fiber bending. The storage modulus G' measured under large-amplitude oscillatory shear (LAOS) was smaller than the linear viscoelastic G', and this difference between the linear and nonlinear moduli was enhanced for the composites with a larger SF content and at lower frequencies. This nonlinear effect was attributable to a decrease of the effective fiber-fiber contacts sustaining the elasticity under LAOS. Under steady shear, the SF/PCL composites exhibited nonlinear (plastic) flow behavior associated with the stress overshoot, and their apparent viscosity was comparable to/lower than the viscosity of neat PCL matrix. The overshoot became much less significant on application of a second shear immediately after the first shear, while the overshoot was partly recovered after a quiescent rest between the first and second shears. These nonlinear features were attributable to slippage between shear-oriented fibers and PCL matrix. (C) 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1957-1970, 2009

Acrylic Polymer Silk Fibroin Blend Fibers

Synthesis and characterization of silk fibroin/acrylic acid/acrylamide superabsorbent polymer

Absorption Properties of Silk Fibroin/Acrylic Acid/Acrylamide Composite Absorbent Material

Compatibilization of Acrylic Polymer-Silk Fibroin Blend Fibers: 2. Morphology and Mechanical Properties of the Compatilized Blend Fibers

Mechanical and biological properties of silk fibroin/carbon nanotube nanocomposite films

Fabrication and characterization of porous tubular silk fibroin scaffolds.

Compatibilization of Acrylic Polymer-Silk Fibroin Blend Fibers. I. Graft Copolymerzation of Acrylonitrile Onto Silk Fibroin

FTIR Imaging, a Useful Method for Studying the Compatibility of Silk Fibroin-Based Polymer Blends

Mechanical and viscoelastic properties of novel silk fibroin fiber/poly(ε-caprolactone) biocomposites

Preparation of Silk Fibroin/Cellulose Blend Films

Hydrogen Bonds in Silk Fibroin-Poly (Acrylonitrile-Co-methyl Acrylate) Blends: FT-IR Study

Complex Formation of Silk Fibroin with Poly(Acrylic Acid)

Specific Interactions in Silk Fibroin–Poly(potassium Acrylate) Blends

Investigation of Silk Fibroin/Poly(Acrylic Acid) Interactions in Aqueous Solution

Structure and microporous formation of cellulose/silk fibroin blend membranes: I. Effect of coagulants

Thermal and crystalline behaviour of silk fiborin/nylon 66 blend films

Conformation Transition of Silk Fibroin Induced by Blending Hydroxypropyl Methylcellulose

Rheological Study on Blend Solutions of Non-mulberry Silk Fibroin and Gelatin Biopolymers

Rheological Behavior of Biocomposites of Silk Fibroin Fiber and Poly(ε‐caprolactone): Effect of Fiber Network

Preparation and Characterization of Transparent Silk Fibroin/cellulose Blend Films

Multifunctional silk fibroin – Poly(L-lactic acid) porous nanofibers: Designing adjustable nanopores to control composite properties and biological responses