Abstract:Zeolites have been widely used for heavy metal removal due to their high cation exchange capacity and surface sorption properties. However, the empirically determined adsorption capacity trend of Pb2+ > Cu2+ > Ni2+ was not well understood. Herein, we discovered that the adsorption of Ni2+ by zeolites was greatly influenced by hierarchical pore geometry, while the adsorption of Pb2+ or Cu2+ was dependent on cation exchange determined by the framework composition. This difference in adsorption mechanisms is manifested through the systematic study of heavy metal adsorption using low-silica LTA and FAU zeolites with different mesopore architectures and compositions. Synthesizing mesoporous zeolite A of MLTA-P using proline mesoporogen considerably enhanced the Ni2+ adsorption capacity to more than twice of that of conventional zeolite A synthesized without organics, while the adsorption capacities for Cu2+ and Pb2+ were almost unaltered at similar to 170 and 510 mg/g. The study on the effect of zeolite synthesis time and adsorbate pH value revealed the significant influence of zeolite crystallinity, surface hydroxyl group, and hierarchical pore architecture on the Ni2+ uptake. The MLTA-P zeolite showed higher stability against pH variation in acid range and remarkably enhanced uptake in alkaline conditions, reaching 218 mg/g at a pH of 11. The full characterization of the adsorbent by scanning electron microscopy and X-ray photoelectron spectroscopy indicated the involvement of the surface reaction forming Ni phyllosilicate nanosheet species during the nickel metal removal process in which transport limitation played a crucial role. The uptake kinetics and isotherms could be perfectly reflected by a pseudo-secondorder rate equation and the Langmuir model, confirming the nature of chemisorption.

Competitive adsorption of Pb2+, Cu2+, and Cd2+ ions on microporous titanosilicate ETS-10.

Preparation and Characterization of a Novel Macroporous Silica-Bipyridine Asymmetric Multidentate Functional Adsorbent and Its Application for Heavy Metal Palladium Removal.

Microporous titanosilicate ETS-10 for the removal of divalent heavy metals

Effect of operating conditions on the removal of Pb2+ by microporous titanosilicate ETS-10 in a fixed-bed column.

Preparation of a Macroporous Silica–pyridine Multidentate Material and Its Adsorption Behavior for Some Typical Elements

Adsorption of Pb2+ from Aqueous Solution by Black TiO2-x Nanoparticles with Enhanced Surface Area and Porosity

Non-Competitive And Competitive Adsorption Of Pb2+, Cd2+ And Zn2+ Ions Onto Sds In Process Of Micellar-Enhanced Ultrafiltration

Adsorption of Pb2+, Zn2+, and Cd2+ from waters by amorphous titanium phosphate.

Adsorption of Pb2+, Cd2+, Cu2+ and Cr3+ Onto Titanate Nanotubes: Competition and Effect of Inorganic Ions

Sorption properties of an amorphous hydroxo titanate towards Pb(2+), Ni(2+), and Cu(2+) ions in aqueous solution

Adsorption performance of thiourea-modified chitosan microspheres to Pt4+ and Pd4+ I. adsorption equilibrium and kinetics

Characteristics of Equilibrium, Kinetics Studies for Adsorption of Hg(II), Cu(II), and Ni(II) Ions by Thiourea-Modified Magnetic Chitosan Microspheres.

ADSORPTION BEHAVIORS AND MECHANISMS OF S930 CHELATING RESIN TOWARD Cu(Ⅱ),Pb(Ⅱ) AND Cd(Ⅱ) FROM AQUEOUS MEDIA

Synthesis of a Novel Silica-Supported Dithiocarbamate Adsorbent and Its Properties for the Removal of Heavy Metal Ions

Effect of Crystal Structure on Adsorption Behaviors of Nanosized TiO2 for Heavy-Metal Cations

Competitive adsorption of Cd(II), Pb(II) and Cu(II) ions from acid mine drainage with zero-valent iron/phosphoric titanium dioxide: XPS qualitative analyses and DFT quantitative calculations

Facile preparation of biosurfactant-functionalized Ti2CTX MXene nanosheets with an enhanced adsorption performance for Pb(II) ions

Comparative Study on Adsorption of Cr(VI), Mn(VII), Pb(II) and Cd(II) from Aqueous Solution Using Cetylpyridinium Bromide-Modified Zeolite

Molecular simulation of adsorption properties of thiol-functionalized titanium dioxide (TiO2) nanostructure for heavy metal ions removal from aqueous solution

Heavy Metal Adsorption with Zeolites: the Role of Hierarchical Pore Architecture

Competitive Adsorption of Pb2+, Cu2+ and Cd2+ Ions from Aqueous Solutions by Multiwalled Carbon Nanotubes