Abstract:Objective: This work focuses on development a new mini sensing module to directly measure periarterial pressure and reduce the effect of muscle action induced artifacts on blood pressure measurement. Design and method: The coupling of blood pressure signal with disturbances such as motion artifacts makes blood pressure measurement unreliable. It is significant to directly measure periarterial pressure and reduce the effect of motion artefacts in the applications of wearable blood pressure monitoring in daily life. The mini sensing module consists of two independent sensing channels (Fig.1). The two channels are closely aligned with the spacing only 1 mm in order to guarantee the blood pressure signal under the channels are same. The two channels have different sizes, one with 5 mm length and 3 mm width and the other one with 8 mm length and 3 mm width. The channels are filled with silicon oil, in the which a silicon die is fixed as pressure sensor unit. The channels are sealed by TPU flexible film with 0.2 mm thickness, which serves as the stimulation interface. Attach the sensor module to wrist and the channel direction is transverse to the arterial path. Specific design endows both channels with same sensitivity to global mechanical excitation and different sensitivity to local excitations. During BP measuring, external pressure and muscle motion artifact act on the entire channel surface serving as global excitation, so both channels have the same sensitivity to them. However, because the width of the radial artery is smaller than the length of the channel, the BP signal act on partial channel surface serving as local excitation. The BP signal has different sensitivity in two channels. The influence of motion artifacts is reduced by differential processing of the output signals of two channels, which also is presented in Fig.2. Results: Experiments have proved the effectiveness of the scheme. Conclusions: By comparison with the BP signal under optimal condition. The sensing module can directly measure periarterial pressure on blood pressure measurement.

The Design of Multi-Channel Pulse Detection System Based on Flexible Array Sensor

Design and implementation of a multi-channel pulse signal acquisition system

A Flexible Crosstalk-Free Piezoresistive Pressure Sensor Array Based on Interdigital-Electrode for High-Precision Pressure Mapping

A Compound Pressure Signal Acquisition System for Multichannel Wrist Pulse Signal Analysis

Wearable multichannel pulse condition monitoring system based on flexible pressure sensor arrays

A SENSING MODULE WITH TWO DIFFERENT SENSING CHANNELS AIMS AT DIRECT MEASUREMENT OF PERIARTERIAL PRESSURE FOR WEARABLE TONOMETRY BLOOD PRESSURE DEVICE

Pulse Signal Acquisition Using Multi-sensors

Design and Realization of an Array Pulse Detecting Tactile Sensor

Wearable Multi-Channel Pulse Signal Acquisition System Based on Flexible MEMS Sensor Arrays with TSV Structure

Development of Pressure Sensor Based Wearable Pulse Detection Device for Radial Pulse Monitoring.

Three-Dimensional Arterial Pulse Signal Acquisition in Time Domain Using Flexible Pressure-Sensor Dense Arrays

Design of wireless portable detection system for pulse condition

Flexible Pressure Sensor Array with Multi-Channel Wireless Readout Chip

Wearable multichannel-active pressurized pulse sensing platform

Human Pulse Signal Acquisition System Based on PVDF Piezoelectric Film

Development Design and Signal Processing Algorithm Optimization of Traditional Chinese Medicine Pulse Acquisition System Based on CP301 Sensor

Multichannel Flexible Pulse Perception Array for Intelligent Disease Diagnosis System

Flexible Sensors Array Based on Frosted Microstructured Ecoflex Film and TPU Nanofibers for Epidermal Pulse Wave Monitoring

Full-field Wrist Pulse Signal Acquisition and Analysis by 3D Digital Image Correlation

Development Of Automatic Dual-Channel Spr Detecting Instrument

[Design of Pulse and Respiratory Signals Detection System]