Abstract:Considering the problems of high tillage resistance, high energy consumption, and failure to break the plow pan in subsoiling caused by the high viscosity of tea garden soil, a new design method of a subsoiler underlying the subsoiling mechanism based on structural bionics and the discrete element method is proposed. Taking the largest toe of mole cricket's forefoot as the bionic object, the biological information of the contour of mole cricket's toe was extracted using the methods of image processing and reverse engineering, and the edges of its outer and inner contours were obtained. Combined with the structure of an existing subsoiler, initial point cloud data of a bionic subsoiling shovel were mapped by the methods of proportional amplification and rotation. Taking the minimum sum of outer and inner contour fitting errors as the optimal objective function and selecting high-order polynomial as the fitting function, the optimization model of the outer and inner contour point cloud fitting function was established. The optimal fitting function of the outer and inner contour point cloud was obtained, and the bionic subsoiler model was established based on these two optimal functions. In the study of the discrete element, four soil particle models were proposed based on the actual shape of the cohesive soil of a tea garden. Based on the principle of discrete elements and the agronomic requirements, a modeling method of the plow pan soil was proposed. First, the adjacent soil particles at the bottom were connected by bonding, and the soil with large porosity was squeezed by the preset force to form the plow pan soil. Then, six tillage layers were added above the plow to form a soil structure model of the tea garden. The bionic subsoiler was assembled into a four-bar subsoiling mechanism. The process of the subsoiling mechanism acting on the soil was analyzed by the co-simulation of ADAMS-EDEM and compared with the common subsoiler. The results showed that the bionic subsoiler, compared with the common subsoiler, reduced the tillage force in the horizontal direction by 16.34% and in the vertical direction by 24.53%, reduced energy consumption by 9.64%, increased the damage to the plow pan by 5.10%, and caused greater disturbance to the internal soil. The influence of different driving speeds on the tillage performance was studied, which provides a theoretical reference for the better selection of the working speed for subsoiling.

Experiment and Drag Reduction Mechanism of Bionic Excavator Tooth during Soil Cutting

Study on the reduction of soil adhesion and tillage force of bionic cutter teeth in secondary soil crushing

Experimental Investigation into Soil-Cutting Performance of the Claws of Mole Rat (Scaptochirus moschatus)

Study on Plant Crushing and Soil Throwing Performance of Bionic Rotary Blades in Cyperus esculentus Harvesting

Optimization design and performance study of a subsoiler underlying the tea garden subsoiling mechanism based on bionics and EDEM

Drag reduction and wear resistance mechanisms of a bionic shovel by discrete element method simulation

Bionic optimization research of soil cultivating component design

Experimental investigation of bionic rough curved soil cutting blade surface to reduce soil adhesion and friction

Biomimetic Rotary Tillage Blade Design for Reduced Torque and Energy Requirement

Research on bionic force-saving cutting tool based on structure characteristics of limpet's teeth

Mesoscopic analysis of drag reduction performance of bionic furrow opener based on the discrete element method

Bionic Optimization Design and Discrete Element Experimental Design of Carrot Combine Harvester Ripping Shovel

A Comprehensive Study on the Mechanical Properties of Bulldozing Plate Soil Engaging Surface Based on the Entropy-Weighted Grey Relational Analysis Method.

Chatter Mechanism and Stability Analysis of Robotic Boring

The Design and Experimental Validation of a Biomimetic Stubble-Cutting Device Inspired by a Leaf-Cutting Ant’s Mandibles

Study on the Interaction between Soil and the Five-Claw Combination of a Mole Using the Discrete Element Method

Structure, mechanics and material properties of claw cuticle from mole cricket Gryllotalpaorientalis

Study on plowing performance of EDEM low-resistance animal bionic device based on red soil

Effects of bionic non-smooth surface on reducing soil resistance to disc ploughing

Development and Analysis of Digging and Soil Removing Mechanisms for Mole-Bot: Bio-Inspired Mole-Like Drilling Robot

Modeling of soil–claw interaction using the discrete element method (DEM)