Abstract:The synthesis of inexpensive and efficient electrocatalysts with an excellent stability for the electrochemical oxygen reduction reaction (ORR) in both alkaline and acid media through a facile environment-friendly strategy is extremely desirable but remains challenging. In this study, a single-atom iron electrocatalyst with exclusively Fe–N4 moieties anchored on nitrogen-doped carbon nanorods (denoted as Fe–SA/NCS) is synthesized through a one-step pyrolysis of Fe-doped zeolitic imidazole framework-8 (ZIF8) nanorods that are synthesized in an aqueous system without acid leaching assistance. Profiting from the synergistic effect of the hierarchically porous carbon support with a rodlike structure and the large number of Fe–N4 moieties, the newly prepared Fe–SA/NCS exhibits excellent ORR catalysis activities with a half-wave potential of 0.91 V vs RHE in 0.1 M KOH as well as 0.77 V vs RHE in 0.1 M HClO4. Furthermore, better stability in alkaline or acid conditions was also observed for Fe–SA/NCS compared with Pt/C. The high open-circuit voltage of 1.53 V and high power density of 141.6 mW cm–2 of a zinc–air battery (ZAB) with Fe–SA/NCS as the cathode material indicate excellent electrochemical performances. The ZAB with the Fe–SA/NCS catalysts exhibits a remarkable cycling performance for more than 300 h with a high voltaic efficiency of 78.6%. The present work could pave the way for the rational construction of highly efficient and stable single-atom electrocatalysts through green synthesis for sustainable energy technologies.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c05509?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c05509</a>.Figure S1: typical SEM images of 3D Fe-doped ZIF8 and the corresponding carbonization product 3D Fe–N–C catalyst, typical TEM images of 3D Fe-doped ZIF8 polyhedrons and corresponding carbonization product 3D Fe–N–C catalyst; Figure S2: typical SEM images of the as-synthesized Fe-doped ZIF8 precursors and corresponding carbonization product Fe–SA/NCS catalyst; Figure S3: XRD pattern of Fe–SA/NCS, high-resolution XPS spectra of Fe 2p and N 1s in Fe–SA/NCS, Raman spectra of Fe–SA/NCS; Figure S4: XPS full spectrum and corresponding atomic percentage (at. %) of C, N, O and Fe in the as-synthesized Fe–SA/NCS catalyst; Figure S5: XRD pattern of Fe–SA/NCS-10; Figure S6: Raman spectra of Fe–SA/NCS-10; Figure S7: N2 adsorption–desorption isotherm of Fe–SA/NCS, corresponding pore size distribution of Fe–SA/NCS, percentage of micropores, mesopores, and macropores, respectively; Figure S8: normalized Fe K-edge XANES spectra of the Fe–SA/NCS and Fe–SA/NCS-10 in reference to Fe foil, FeO, and Fe2O3, k3-weighted Fourier transform of the Fe K-edge EXAFS spectrum, wavelet transform (WT) of these samples, corresponding EXAFS fitting curve for Fe–SA/NCS-10; Table S1: Fe K-edge EXAFS curves fitting parameters for various samples; Table S2: comparison of ORR performance for Fe–SA/NCS with some reported catalysts in the alkaline and acid solution; Figure S9: LSV curves of Fe–SA/NCS in O2-saturated 0.1 M KOH at various rotation speeds, K–L plots of Fe–SA/NCS at various potentials, LSV curves of 3D Fe–N–C in O2-saturated 0.1 M KOH at various rotation speeds, K–L plots of 3D Fe–N–C at various potentials; Figure S10: ORR polarization curve of Fe–SA/NCS-10 in O2-saturated 0.1 M KOH solution at a rotation rate of 1600 rpm, Stability evaluation by i–t chronoamperometric response of Fe–SA/NCS-10 in O2-saturated 0.1 M KOH solution at 0.67 V; Figure S11: ORR polarization curve and ring current of Fe–SA/NCS-3 in O2-saturated 0.1 M KOH solution at a rotation rate of 1600 rpm; Figure S12: ORR polarization curve and ring current of Fe–SA/NCS-1 in O2-saturated 0.1 M KOH solution at a rotation rate of 1600 rpm; Figure S13. ORR polarization curve and ring current of Fe–SA/NCS-800 in O2-saturated 0.1 M KOH solution at a rotation rate of 1600 rpm; Figure S14: ORR polarization curve and ring current of Fe–SA/NCS-1000 in O2-saturated 0.1 M KOH solution at a rotation rate of 1600 rpm; Figure S15: SCN– poison test for Fe–SA/NCS in 0.1 M HClO4 with the addition of 0.01 M KSCN, steady-state ORR polarization curves of Fe–SA/NCS recorded in O2-saturated 0.1 M HClO4 with or without poisoning by 0.01 M SCN–; Figure S16: ORR polarization curve of NCS-900 in O2-saturated 0.1 M KOH solution at a rotation rate of 1600 rpm; stability evaluation by i–t chronoamperometric response of NCS-900 in O2-saturated 0.1 M KOH solution at 0.67 V, ORR polarization curve of NCS-900 in O2-saturated 0.1 M HClO4 solution at rotation rate of -Abstract Truncated-

Novel KOH electrolyte for one-step electrochemical synthesis of high purity solid K2FeO4: Comparison with NaOH

Electrochemical Preparation, Characterization and Discharge Performance of Solid K3Na(FeO4)2

Effects of KIO 3 Additive on the Direct Electrosynthesis of K 2 FeO 4

Effects of KOH and Temperature on Hydrothermal Synthesis of Α-Feooh Nanowire

Study on the Synthesis and Physicochemistry Properties of Tripotassium Sodium Ferrate(Vi)

Effects of potassium iodide additive on direct electrosynthesis of potassium ferrate

Effect of α-FeOOH in KOH Electrolytes on the Activity of NiO Electrodes in Alkaline Water Electrolysis for the Oxygen Evolution Reaction

The Effects of Ultrasound on the Direct Electrosynthesis of Solid K 2 FeO 4 and the Anodic Behaviors of Fe in 14 M KOH Solution

Electrochemical Conditioning of Metallurgically Prepared NiFe3 Binary Alloy for Facile Oxygen Evolution Reaction

High-throughput electrochemical strategy for synthesis of iron-based nanostructures for electrocatalytic water splitting

Electrochemical Synthesis of Ferrate(VI) by Anodic Oxidation

Promotion effect of KOH on preparation of dissolved Fe（Ⅵ）

Toward Continuous Electrochemical Synthesis of Ferrate

Electrochemical Oscillation During Electro-Synthesis of KMnO4under Highly-Alkaline Condition

Ordered mesoporous spinel CoFe2O4 as efficient electrocatalyst for the oxygen evolution reaction

Tailoring the oxide surface composition of stainless steel for improved OER performance in alkaline water electrolysis

Physical Properties and Electrochemical Performance of Solid K2FeO4 Samples Prepared by Ex-situ and In-Situ Electrochemical Methods

Preparation of highly active and durable electrodes for alkaline water electrolysis by anodizing of commercial FeNi and FeNiCo alloys

Direct electrochemical preparation of sodium ferrate

Sodium Tartrate-Assisted Synthesis of High-Purity NiFe2O4 Nano-Microrods Supported by Porous Ketjenblack Carbon for Efficient Alkaline Oxygen Evolution.

Green Synthesis of a Highly Efficient and Stable Single-Atom Iron Catalyst Anchored on Nitrogen-Doped Carbon Nanorods for the Oxygen Reduction Reaction