Abstract:The General weight function expressions given in Gao (J. Mech. Phys. Solids37, 133, 1989), referred to here as part I, for combined-mode crack-dislocation interaction problems in the three-dimensional regime are applied to solve for the stress field and energy of a shear dislocation loop emerging from the tip of a half-plane crack. The results are compared to the previously proposed approximate estimates for shear loops by Anderson and Rice (J. Mech. Phys. Solids35, 743, 1987), who solved exactly for prismatic opening dislocation loops that are co-planar with the crack and also for the analogous 2-D cases of general crack tip-parallel line dislocations. The energy results are presented in terms of a correction factor m, following Anderson and Rice, to the usual estimate of energy for an emergent crack tip loop as half the energy of a full loop (identified as the emergent loop and its image relative to the crack front) in an uncracked solid. For a full circular shear loop the energy is U = [(2 − ν)μb2r/4(1-ν)] In (8r/e2r0), where r0 denotes the core cut-off parameter and μ, ν are the shear modulus and Poisson ratio. Thus for a semicircular loop emerging from the crack tip, the energy is expressed as U = [(2 − ν)μb2r/8(1-ν] In (8mr/e2r0), where the constant m depends on the orientation angle Ψ of the Burgers vector relative to a line normal to the crack tip and the inclination angle φ of the dislocated plane relative to the crack plane. The m factors are calculated at selected angles φ for rectangular and semicircular loops. This involves multiple numerical integrations based on the weight functions of part I, first to obtain the stress field and then to integrate it over the dislocated area to get the energy, and requires a large amount of computing CPU time. An approximate formula for m is proposed for general inclined dislocation loops, based on known 2-D results for m factors for arbitrary angles φ calculated by Anderson and Rice (1987) and the 3-D m(φ = 0) results given here for shear dislocation loops in the crack plane. It compares well to the exact results.

Mismatched elastic connections

On mismatch problems for plane and elliptic connections

Nearly Circular Connections of Elastic Half Spaces

The Transient Responses of a Special Non-Homogeneous Magneto-Electro-elastic Hollow Cylinder for Axisymmetric Plane Strain Problem

Weight Function-Analysis of Interface Cracks - Mismatch Versus Oscillation

Somewhat Circular Tensile Cracks

Deformations of an elastic half plane with a circular cavity

Stress-Analysis Of Holes In Anisotropic Elastic Solids - Conformal Mapping And Boundary Perturbation

Lateral Buckling of Interconnects in A Noncoplanar Mesh Design for Stretchable Electronics

Interfacial crack-tip field in anisotropic elastic solids

Non-slipping Adhesive Contact Between Mismatched Elastic Cylinders

Application of 3-D Weight Functions—i. Formulations of Crack Interactions with Transformation Strains and Dislocations

Weight Functions and Stress Intensity Factors for Two Unequal-Length Collinear Cracks in an Infinite Sheet

Torsion of elastic solids with sparse voids parallel to the twist axis

Weight functions for external circular cracks

Application of 3-D weight functions—II. The stress field and energy of a shear dislocation loop at a crack tip

Mismatch Constraint Effect of Creep Crack With Modified Boundary Layer Model

Elastic fields of double branched and Kalthoff–Winkler cracks in a half-plane

IGA Approximations of Elastic Interfaces and their Defects in an Elastic Medium with Couple Stress

On Elastic Line Contact

Couple-stress elasticity of intrinsic and extrinsic dislocations in three-dimensional multilayered materials