Abstract:Electrochemical machining (ECM) has emerged as an important option for manufacturing the blisk. The inter-electrode gap (IEG) distribution is an essential parameter for the blisk precise shaping process in ECM, as it affects the process stability, profile accuracy and surface quality. Larger IEG leads to a poor localization effect and has an adverse influence on the machining accuracy and surface quality of blisk. To achieve micro-IEG (<50 μm) blisk finishing machining, this work puts forward a novel variable-parameters blisk ECM strategy based on the synchronous coupling mode of micro-vibration amplitude and small pulse duration. The modelling and simulation of the blisk micro-IEG machining have been carried out. Exploratory experiments of variable-parameters blisk ECM were carried out. The results illustrated that the IEG width reduced with the progress of variable parameter process. The IEG width of the blade's concave part and convex part could be successfully controlled to within 30 μm and 21 μm, respectively. The profile deviation for the blade's concave surface and convex surface are 49 μm and 35 μm, while the surface roughness reaches R a = 0.149 μm and R a = 0.196 μm, respectively. The profile accuracy of the blisk leading/trailing edges was limited to within 91 μm. Compared with the currently-established process, the profile accuracy of the blade's concave and convex profiles was improved by 50.5% and 53.3%, respectively. The surface quality was improved by 53.2% and 50.9%, respectively. Additionally, the machined surface was covered with small corrosion pits and weak attacks of the grain boundary due to selective dissolution. Some electrolytic products were dispersed on the machined surface, and their components were mainly composed of the carbide and oxide products of Ti and Nb elements. The results indicate that the variable-parameters strategy is effective for achieving a tiny IEG in blisk ECM, which can be used in engineering practice.

Edming Turbopump Blisks

A Special Rimed Turbine Blisks CAD/CAM System Based on Solidworks

Manufacturing Turbine Blisks

Integral Shrouded Blisk EDM Pre-rough Machining by Using Simplified Electrode

CAD/CAM for Shrouded Blisk by Electro-Discharge Machining

Key Techniques for EDM of Shrouded Turbine Blisk's Surface Quality

Fabrication Of Key Components In Micro Turbine Engine By Using Micro Electrical Discharge Machining (Edm)

A Special CAD/CAM System for EDMing Shrouded Turbine Blisks

Electrical Discharge Machining of Electron Beam Melting Formed Shrouded Blisk

Feeding with Perturbations in the EDM Process of an Integral Shrouded Blisk

A Special CAD/CAM Software for Electro-Discharge Machining of Shrouded Turbine Blisks

Electrode Design Using Revolving Entity Extraction for High-Efficiency Electric Discharge Machining of Integral Shrouded Blisk

Overview on Five-Axis Precision EDM Techniques

Blasting Erosion Arc Machining of Turbine Blisk Flow Channel with Laminated Electrode

Electrode Feeding Path Searching for 5-Axis EDM of Integral Shrouded Blisks

Electrode Designing System for EDMing Shrouded Turbine Blisk Based on UG Secondary Development

Tool path generation for machining shrouded turbine blisk

CAD/CAM of rimed blisks

Development of an EN8 Steel Stepped Rotor by a Novel Engraving Milling Technique

Improving profile accuracy and surface quality of blisk by electrochemical machining with a micro inter-electrode gap

Design and Fabrication of the Micro Turbine for Micro Gas Turbine Engine