Abstract:Purpose The scanning of plaster models for three-dimensional (3D) construction requires their rigid fixation in the intercuspal position. Factors such as installation, motion, and scanning procedures influenced the accuracy of this method, which ultimately influence the results. Therefore, the present study attempted to provide an optimal and accurate method with less complex procedures and a more accessible equipment for determining the intercuspal relation in the 3D occlusal construction of dental models. Methods A pair of plastic mounting plates that could be directly attached to a mechanical articulator was designed and 3D printed. Nine axial hemispherical concaves were introduced on the axial surface of each plate. The rigidly fixed maxillary and mandibular dental models were scanned directly. The distances D R between nine pairs of concaves on both mounting plates adhered to the maxillary and mandibular sections of the articulator were measured using the three-coordinate measuring machine Faro Edge as the reference. The present study comprised seven test groups varying in number and location. Assessing the reference points from each of the seven groups performed the 3D construction. The Geomagic Studio software was used to construct the concaves of digital casts, and the distances D M between the pairs of concaves were measured as test values. Variable differences between D R and D M were analyzed. Results An optimum distribution scheme was obtained for reference point registration by quantitatively evaluating accuracy levels of the 3D constructions of different reference point distribution patterns. This scheme can serve as a reference for related studies and dental clinic operations. Conclusions Three-dimensional construction of the intercuspal relation during scanning of the maxillary and mandibular models with an accuracy of 0.046 mm ± 0.009 mm can be achieved using the improved design of mounting plates.

[Establishment of Artificial-Tooth Three-Dimensional Coordinates Based on Dental Anatomic Concepts].

Establishment of artificial tooth coordinate for full denture

A study of a 3D graphic database of the artificial teeth which can be aligned with parameters

Measurement and Analysis of the Geometric Feature of the Anatomic Occlusal Form Artificial Teeth.

Establishment of the ideal 3-D tooth crowns and development of its operating program

A algorithm for 3D reconstruction of artificial teeth

[Establishing Three-Dimensional Reconstruction and Measuring System for Complete Denture Occlusion].

Study on Digital Teeth Selection and Virtual Teeth Arrangement for Complete Denture

The three-dimensional measurements and analysis of anatomic artificial teeth cusp inclination

Three-dimensional Analysis for Parameters Relating to Balanced Occlusion of Complete Denture

Computer-aided Design of Tooth Preparations for Automated Development of Fixed Prosthodontics.

Digitized occlusal reconstruction for dental prostheses

Computer Aided 3-D Reconstruction of Defect Dentition

Establishment of standard tooth crowns and bridges database

A Three-Dimensional Analysis of Measuring Occlusal Contacts of Complete Denture

[Establishment of Database with Standard 3D Tooth Crowns Based on 3DS MAX].

[Three-Dimensional Computer Aided Design for Individualized Post-and-core Restoration].

Optimum design of reference points distribution in three-dimensional reconstruction of dental model in intercuspal position

Establishment of Three-.Dimensional Finite Element Model of Mandibular Incisor Defect Restored by Telescopic Crown Retainers

Accuracy Evaluation of a New Three-Dimensional Reproduction Method of Edentulous Dental Casts, and Wax Occlusion Rims with Jaw Relation.

Three-dimensional tooth reconstruction method based on panoramic tomograph