Abstract:The detection method for direct machining the standard test pieces, which is commonly employed to exhibit the machining precision of five-axis machine tools, can truly reflect the dynamic accuracy of five-axis machine tools in the actual machining process. Existing theories on explaining the phenomenon that the ability of S-shaped test pieces to detect dynamic accuracy for five-axis machine tools are stronger than those of NAS979 test pieces mostly used the qualitative research methods, and they cannot be quantitatively used to reveal the mathematical relationship between machine tools and test pieces. Therefore, this article makes the first attempt to investigate the quantitative evaluation method for the validity of dynamic accuracy test pieces. The dynamic error function of the servo feed system in the frequency domain was derived first by establishing the mechanical system model and control system model. The method of dipole cancellation was used to acquire a simplified transfer function for the dynamic error affected by the input. Based on the zero-order hold property of the discrete input signals, the expression of dynamic error affected by input in the time domain, which intuitively shows the mathematical relationship among the machine tool performances, the test piece characteristics and the dynamic error of the servo feed system, was obtained. Then, the novel evaluation methods of the linear combinatorial value and the combinatorial linear combinatorial value were proposed. A series of comparative analyses between an S-shaped test piece and an NAS979 test piece were carried out based on the proposed new evaluation methods. A machining experiment conducted on a five-axis machine tool is used to verify the evaluation results.

The Evaluation of the CNC Machine's Dynamic Performance Based on Rough-Set Theory

Intelligent Fault Diagnosis of CNC Machine Tools Based on Rough Set Theory

New evaluation method on the precision of NC machine tools

Machining tests to identify kinematic errors of machine tool table rotation axis based on sensitive directions

Research on Inverse Evaluation Mechanism in Toolpath Generation Based on Global Interpolation Simulation

Time-varying comprehensive evaluation technology of CNC machine tool RMS based on improved ADC model

Geometric Error Contribution Modeling and Sensitivity Evaluating for Each Axis of Five-Axis Machine Tools Based on POE Theory and Transforming Differential Changes Between Coordinate Frames

Dynamic Performance Analysis and Experimental Verification for TGK46100 High-precision NC Coordinate Boring Machining

Analysis of dynamic characteristics of five‐axis CNC machine tool

Online Evaluation Method of Machining Precision Based on Built in Signal Testing Technology

Dynamic Performance Test under Complicated Motion States for Five-Axis Machine Tools Based on Double Ballbar

A Novel Method for Evaluating the Validity of Dynamic Accuracy Test Pieces for Five-Axis Machine Tools

Dynamic Characteristic Analysis and Optimization for the High Speed CNC Turning Center

Reliability tests and evaluation technique research of CNC machine tools

Dynamic positioning error analysis and modeling of CNC machine tool guideway system

A Comprehensive Evaluation Method for Generalized Reliability of CNC Machine Tools Based on Improved Entropy-Weighted Extensible Matter-Element Method

Visualized Analysis and Simulation Research on Dynamic Performance of the Whole NC Machine Tool

Dynamic and Static Error Identification and Separation Method for Three-Axis CNC Machine Tools Based on Feature Workpiece Cutting

A Drives and Control Integrated Time-Domain Dynamic Analysis and Modeling Approach Applied To Ultra-Precision Machine Tools

Modeling, identification, and measurement of geometric errors for a rotary axis of a machine tool using a new R-test

Rapid Evaluation Technology for CNC Machine Tool Slide Level Based on Built-in Sensors