Abstract:Unmanned Aerial Vehicles (UAVs) have shown great potential in agriculture and are increasingly being developed for agricultural use. There are still a lot of experiments that need to be done to improve their performance and explore new uses, but experiments using UAVs are limited by many conditions like weather and location and the time it takes to prepare for a flight. To promote UAV remote sensing, a near ground remote sensing platform was developed. This platform consists of three major parts: (1) mechanical structures like a horizontal rail, vertical cylinder, and three axes gimbal; (2) power supply and control parts; (3) onboard application components. This platform covers five degrees of freedom (DOFs): horizontal, vertical, pitch, roll, yaw. A stm32 ARM single chip was used as the controller of the whole platform and another stm32 MCU was used to stabilize the gimbal. The gimbal stabilizer communicates with the main controller via a CAN bus. A multispectral camera was mounted on the gimbal. Software written in C++ language was developed as the graphical user interface. Operating parameters were set via this software and the working status was displayed in this software. To test how well the system works, a laser distance meter was used to measure the slide rail's repeat accuracy. A 3-axis vibration analyzer was used to test the system stability. Test results show that the horizontal repeat accuracy was less than 2 mm; vertical repeat accuracy was less than 1 mm; vibration was less than 2 g and remained at an acceptable level. This system has high accuracy and stability and can therefore be used for various near ground remote sensing studies.

LabVIEW Based Experimental Platform for UAV System Identification

Virtual Design of Precision Irrigation Detection System

LabVIEW-Based Experiment Platform for Identification and Simulation

Pipeline parameter identification of non-stationary flows based on LabVIEW

Design of Ground Control Station for Mini Unmanned Aerocraft Vehicle

Design of Hardware-In-Loop Simulation System for Unmanned Aerial Vehicle

A Survey and Categorization of Small Low-Cost Unmanned Aerial Vehicle System Identification

Design and Hardware-in-the-loop Simulation of MUAV's Flight Control System

A Qnx-Based Hardware And Software Platform For Uav Control

Design and Implementation of a UAV-Based Airborne Computing Platform for Computer Vision and Machine Learning Applications

Small Unmanned Aerial Vehicle Visual System for Ground Moving Target Positioning

Design of Autonomous Bolt Detection System Based on Quadrotor UAV

An Innovative Virtual Simulation Teaching Platform on Digital Mapping with Unmanned Aerial Vehicle for Remote Sensing Education

Design And Implementation Of A Target Detection And Localization System For Uav

Development of a Near Ground Remote Sensing System

Research and Development of a Real-time UAV Flight Visualization Simulation System

VIUNet: Deep Visual–Inertial–UWB Fusion for Indoor UAV Localization

System Identification of a Small UAV's Speeding Up Process Before Take-off

A Uav Remote Sensing System: Design And Tests

Real-time inspection and auxiliary shooting system of transmission line components based on unmanned aerial vehicles

Application of Beidou Satellite Navigation System and Data Transceiver in UAV Monitoring System