Abstract:Downhole acoustic telemetry (DAT), using a long drill string with periodical structures as the channel, is a prospective technology for improving the transmission rate of logging while drilling (LWD) data. Previous studies only focused on the acoustic property of a free drill string and neglected the coupling between pipes and fluid-filled boreholes. In addition to the drill-string waves, a series of fluid waves are recorded in the DAT channel, which has not been investigated yet. Unpredictable channel characteristics result in lower transmission rates and stability than expected. Therefore, a more realistic channel model is needed considering the fluid-filled borehole. In this paper, we propose a hybrid modeling method to investigate the response characteristics of the DAT channel. By combining the axial wavenumbers and excitation functions of mode waves in radially layered LWD structures, the channel model is approximated to the 1-D propagation, which considers transmission, reflection, and interconversion of the drill-string and fluid waves. The proposed 1-D approximation has been well validated by comparing the 2-D finite-difference modeling. It is revealed that the transmitted and converted fluid waves interfere with the drill-string wave, which characterizes the DAT channel as a particular coherent multi-path channel. When a fluid-filled borehole surrounds the drill string, the channel responses exhibit considerable delay as well as strong frequency selectivity in amplitude and phase. These new findings suggest that the complexity of the channel response has been underestimated in the past, and therefore channel measurements on the ground are unreliable. To address these channel characteristics, we apply a non-coherent demodulation strategy. The transmission rate for synthetic data reaches 15 bps in a 94.5 m long channel, indicating that the acoustic telemetry is promising to break the low-speed limitation of mud-pulse telemetry.

Processing of Wellbore Anti-collision Signal Based on Empirical Mode Decomposition

Research of Feature Extraction Method Based on Sparse Reconstruction and Multiscale Dispersion Entropy

Study on the Method of EMD-Based Vibration Signal Time-Frequency Analysis

Energy-Based Stop Condition of Empirical Mode Decomposition of Vibration Signal

An effective EMD-based feature extraction method for boring chatter recognition

Induction Logging Through Casing by Detecting Lateral Waves: A Numerical Analysis

Statistics Pattern Cointegration Analysis Based Bit Bounce Detection for Drilling Process

Factors Influencing Radiation Sound Fields in Logging While Drilling Using an Acoustic Dipole Source

An FSCEEMD method for downhole weak SNR signal extraction of near-bit attitude parameters

Application of multi-layer denoising based on ensemble empirical mode decomposition in extraction of fault feature of rotating machinery

Wavefield simulation and analysis with the finite-element method for acoustic logging while drilling in horizontal and deviated wells

Eliminating Phase Drift for Distributed Optical Fiber Acoustic Sensing System with Empirical Mode Decomposition

Adaptive dynamic mode decomposition and its application in rolling bearing compound fault diagnosis

Theoretical Analysis of Empirical Mode Decomposition

Research on the Cooperative Detection of Stochastic Resonance and Chaos for Weak SNR Signals in Measurement While Drilling

An Improved Time and Frequency Analysis Method Combined with WVD and EEMD

Experimental evaluation of rock disintegration detection in drilling by a new acoustic sensor method

Measurement and simulation of nonlinear drillstring stick–slip and whirling vibrations

Tool-Emitted Sound Signal Decomposition Using Wavelet and Empirical Mode Decomposition Techniques—A Comparison

Response analyses on the drill-string channel for logging while drilling telemetry

Feasibility Research on Break-out Detection Using Audio Signal in Drilling Film Cooling Holes by EDM