Abstract:Real-time motion planning under position and torque constraints is a critical challenge for cooperative manipulator efficiency and safety operation. Real-time motion planning at the velocity level improves computation efficiency, eliminates the complex derivative calculation of the Jacobian matrix, and the velocity planning solution can be used directly for robotic kinematic control. However, little research attention has been attached to handling the position and torque constraints simultaneously at velocity level for cooperative manipulator systems. In this paper, we introduce a novel homogeneous weighted least-norm method (HWLN) for joint velocity redistribution of cooperated manipulators. Within the coupled kinematics-dynamics model of cooperated manipulators, joint position and torque constraints are simultaneously homogenized and taken into account by the constraint performance index. To avoid joint's constraint saturations, two real-time weight updating laws are designed for the joint position and driving torque respectively. The joint velocities of cooperated manipulators are then adaptively redistributed using the pseudo-kinetic-energy minimum optimization criteria. When compared to single manipulator regulation, this strategy takes greater advantage of cooperative redundancy and significantly enhances the position-torque planning performance. Mathematical stability proof is presented. In the meanwhile, numerical experiment results under various joint position and torque constraints demonstrate the effectiveness of the proposed HWLN method. The experimental results for motion planning and control of two 6R ABD-20Kg robotic manipulators are provided.

Different-Level Schemes' Equivalence for Self-Motion Planning of Robot Manipulators.

Motion Planning of Redundant Mobile Manipulators with a Barycentric Constraint

Distributed Cooperative Motion Planning for Multiple Articulated Robots

Enhancing kinematic accuracy of redundant wheeled mobile manipulators via adaptive motion planning

A Pseudo-Inverse Redundancy-Based Resolution Scheme at the Acceleration Level to Control Robotic Arm Motion

A Kinematics Control Scheme of Redundant Manipulators Under Unknown Loads or External Forces

Analysis and Verification of Repetitive Motion Planning and Feedback Control for Omnidirectional Mobile Manipulator Robotic Systems

Kinematic and Dynamic Models of Hyper-Redundant Manipulator Based on Link Eigenvectors

Optimization-based Motion Planning of Mobile Manipulator with High Degree of Kinematic Redundancy

Novel Snap-Layer MMPC Scheme via Neural Dynamics Equivalency and Solver for Redundant Robot Arms With Five-Layer Physical Limits

A new discrete-time repetitive motion planning scheme based on pseudoinverse formulation for redundant robot manipulators with joint constrains

Trajectory Planning of Large Redundant Manipulator Considering Kinematic Constraints and Energy Efficiency

A Two-Level Approach to Motion Planning of Soft Variable-Length Manipulators

Achieving Unit-Consistent Pseudo-Inverse-based Path-Planning for Redundant Incommensurate Robotic Manipulators

Bi-criteria Velocity Minimization Approach of Self-Motion for Redundant Robot Manipulators with Varying-Gain Recurrent Neural Network

Cyclic motion generation of multi-link planar robot performing square end-effector trajectory analyzed via gradient-descent and Zhang et al’s neural-dynamic methods

Homogeneous weighted motion planning for cooperated manipulator systems under position-torque constrained processing Environment

Toward coordinated planning and hierarchical optimization control for highly redundant mobile manipulator

Inverse kinematics and planning/control co-design method of redundant manipulator for precision operation: Design and experiments

Adaptive Hybrid Optimization Learning-Based Accurate Motion Planning of Multi-Joint Arm

Motion Planning Of Hyper Redundant Manipulators Based On A New Geometrical Method