Abstract:This study conducts an in-depth evaluation of imaging algorithms and software and hardware architectures to meet the capability requirements of real-time image acquisition systems, such as spaceborne and airborne synthetic aperture radar (SAR) systems. By analysing the principles and models of SAR imaging, this research creatively puts forward the fully parallel processing architecture for the back projection (BP) algorithm based on Field-Programmable Gate Array (FPGA). The processing time consumption has significant advantages compared with existing methods. This article describes the BP imaging algorithm, which stands out with its high processing accuracy and two-dimensional decoupling of distance and azimuth, and analyses the algorithmic flow, operation, and storage requirements. The algorithm is divided into five core operations: range pulse compression, upsampling, oblique distance calculation, data reading, and phase accumulation. The architecture and optimisation of the algorithm are presented, and the optimisation methods are described in detail from the perspective of algorithm flow, fixed-point operation, parallel processing, and distributed storage. Next, the maximum resource utilisation rate of the hardware platform in this study is found to be more than 80%, the system power consumption is 21.073 W, and the processing time efficiency is better than designs with other FPGA, DSP, GPU, and CPU. Finally, the correctness of the processing results is verified using actual data. The experimental results showed that 1.1 s were required to generate an image with a size of 900 × 900 pixels at a 200 MHz clock rate. This technology can solve the multi-mode, multi-resolution, and multi-geometry signal processing problems in an integrated manner, thus laying a foundation for the development of a new, high-performance, SAR system for real-time imaging processing.

Corner turn of SAR data based on multi-FPGAs parallel system

An Efficient Dual-Channel Data Storage and Access Method for Spaceborne Synthetic Aperture Radar Real-Time Processing

Efficient and Flexible 2-D Data Controller for SAR Imaging System

On-chip Data Organization and Access Strategy for Spaceborne SAR Real-Time Imaging Processor

A Novel Crossbar Scheduling for Multi-FPGA Parallel SAR Imaging System

Realization of CTM in SAR Imaging System Based on DDR2 SDRAM and FPGA

High-Throughput, Resource-Efficient Multi-Dimensional Parallel Architecture for Space-Borne Sea-Land Segmentation.

FPGA-based Parallel System for Synthetic Aperture Radar Imaging

A Spaceborne Synthetic Aperture Radar Partial Fixed-Point Imaging System Using a Field- Programmable Gate Array-Application-Specific Integrated Circuit Hybrid Heterogeneous Parallel Acceleration Technique

A Spaceborne Synthetic Aperture Radar Partial Fixed-Point Imaging System Using A Field- Programmable Gate Arrayapplication-Specific Integrated Circuit Hybrid Heterogeneous Parallel Acceleration Technique

Real-Time Spaceborne Synthetic Aperture Radar Float-Point Imaging System Using Optimized Mapping Methodology and a Multi-Node Parallel Accelerating Technique

Towards On-Board SAR Processing with FPGA Accelerators and a PCIe Interface

Special Quick CTM Method in Real-Time SAR Imaging

Distributed Real-Time Image Processing of Formation Flying SAR Based on Embedded GPUs

Parallel Optimisation and Implementation of a Real-Time Back Projection (BP) Algorithm for SAR Based on FPGA

FPGA-Based Parallel Processing for Fast Time-Domain Imaging Algorithm of SAR

An FPGA-Based Four-Channel 128K-Point FFT Processor Suitable for Spaceborne SAR

Storage and Pretreatment of SAR Signal Based on FPGA

Accelerating Time-Domain SAR Raw Data Simulation for Large Areas Using Multi-GPUs.

Design and realization of the SDRAM controller in an embedded panoramic image processing system based on FPGA

A Deep Collaborative Computing Based SAR Raw Data Simulation on Multiple CPU/GPU Platform.