Abstract:An optimal solution to the task-space tracking problem using a non-redundant manipulator is proposed. This is a recurring occurrence in automated manufacturing settings, e.g. welding, deburring, painting, or quality control inspections. Given a pre-defined path for the end-effector to follow, there may not exist a joint-space continuous solution for task-space tracking when the non-linear manipulator kinematics and collision avoidance with obstacles in the workcell are considered. This introduces undesirable manipulator reconfigurations where the end-effector is required to deviate temporarily from the pre-defined path. The unwanted motion results in pausing task-space tracking, often incurring not only ineffective time and energy demands but potentially compromising the quality of the task at hand due to the additional discontinuities. An algorithm is proposed that provides a globally optimal perspective to the choice of suitable joint-space connected segments so that the minimum number of manipulator reconfigurations during task-space tracking is guaranteed. By carefully selecting the inverse kinematic solutions, all sequences ensuring minimum reconfigurability are proven collected by Dynamic Programming. Moreover, a faster greedy strategy is suggested to increase the computational efficiency of the tracker whilst still preserving global optimality and completeness. The effectiveness of the proposed algorithm is validated against traditional sampling-based solvers in simulation and illustrated on challenging real-world tracking experimentation with a Universal Robotics manipulator and a curved-surface object, depicted also in an accompanying video. An open-source implementation has also been provided for the benefit of the robotics community.

Dynamic Visual Tracking for Manipulators Using an Uncalibrated Fixed Camera

Simultaneous Tracking and Regulation Visual Servoing of Wheeled Mobile Robots with Uncalibrated Extrinsic Parameters

Trajectory Tracking Control of A Hydraulic Parallel Robot Manipulator with Lumped Disturbance Observer

Variable Force Tracking Control Via Online Learning

Optimal Task-Space Tracking with Minimum Manipulator Reconfiguration

Dynamic Object Tracking for Quadruped Manipulator with Spherical Image-Based Approach

Visual Tracking Control of General Robotic Systems

Adaptive Event-Triggered Control For Uncalibrated Visual Servoing of Robot Manipulators

Adaptive visual servoing control for uncalibrated robot manipulator with uncertain dead-zone constraint

Fast and Accurate Tracking Control of Robotic Manipulators Subject to State Constraints and Input Saturation by Effectively Integrating Planning Strategies

Visual Servoing with an Uncalibrated Eye-in-hand Camera

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Fully Uncalibrated Image-Based Visual Servoing of 2DOFs Planar Manipulators With a Fixed Camera

Homography-based Trajectory Tracking of Industrial Manipulator with Iterative Learning Control

Resilient adaptive trajectory tracking control for uncalibrated visual servoing systems with unknown actuator failures

Fast and Accurate Motion Tracking of a Linear Motor System under Kinematic and Dynamic Constraints: an Integrated Planning and Control Approach

Vision-based Adaptive Tracking Control of Uncertain Nonholonomic Mobile Robots

A novel multidimensional uncalibration method applied to six-axis manipulators

Adaptive Homography-Based Visual Servo Tracking for a Fixed Camera Configuration with a Camera-in-hand Extension

Visual Servoing of Flexible Manipulators With Unknown Camera Intrinsic Parameters and Vibration States

Vision-based neural predictive tracking control for multi-manipulator systems with parametric uncertainty