Modified Homotopy Perturbation Method for Solving the Stokes Equations

Xinlong Feng,Yinnian He

DOI: https://doi.org/10.1016/j.camwa.2010.09.041

2011-01-01

Abstract:A new approach is proposed for the stationary Stokes equations. Based on the homotopy perturbation method, some iterative algorithms are constructed, and four kinds of perturbation cases are considered respectively. Numerical experiments show that these algorithms are simple and effective.

What problem does this paper attempt to address?

Application of Modified Homotopy Perturbation Method for Solving the Augmented Systems

Xinlong Feng,Yinnian He,Jixiang Meng

DOI: https://doi.org/10.1016/j.cam.2009.02.018

IF: 2.872

2009-01-01

Journal of Computational and Applied Mathematics

Abstract:In this paper, a new approach is proposed for solving the augmented systems. Based on the modified homotopy perturbation method, we construct the new iterative methods and derive the sufficient and necessary conditions for guaranteeing its convergence. Some numerical experiments show that this method is more simple and effective.
Stokes coupling method for the exterior flow Part IV: stabilized finite element approximation

Yinnian He

DOI: https://doi.org/10.1016/j.amc.2005.03.019

IF: 4.397

2006-01-01

Applied Mathematics and Computation

Abstract:Based on the Stokes coupling method for solving the two dimensional exterior unsteady Navier–Stokes equations, the stabilized finite element approximation combining the boundary element with the stabilized finite element for solving the reduced Stokes coupling equations is presented. Finally, the optimal error estimates for the finite element solution are derived.
Application of Homotopy Perturbation Method to the Bratu-Type Equations

Xinlong Feng,Yinnian He,Jixiang Meng

2008-01-01

Topological Methods in Nonlinear Analysis

Abstract:A new algorithm is presented for solving the Bratu-type equations. The numerical scheme based on the homotopy perturbation method is deduced. Two boundary value problems and an initial value problem are given to illustrate effectiveness and convenience of the proposed scheme. Our results agree very well with the numerical solutions showing that the homotopy perturbation method is a promising method.
Discontinuous Galerkin Method with Staggered Hybridization for a Class of Nonlinear Stokes Equations

Jie Du,Eric T. Chung,Ming Fai Lam,Xiao-Ping Wang

DOI: https://doi.org/10.1007/s10915-018-0676-z

2018-01-01

Journal of Scientific Computing

Abstract:In this paper, we present a discontinuous Galerkin method with staggered hybridization to discretize a class of nonlinear Stokes equations in two dimensions. The utilization of staggered hybridization is new and this approach combines the features of traditional hybridization method and staggered discontinuous Galerkin method. The main idea of our method is to use hybrid variables to impose the staggered continuity conditions instead of enforcing them in the approximation space. Therefore, our method enjoys some distinctive advantages, including mass conservation, optimal convergence and preservation of symmetry of the stress tensor. We will also show that, one can obtain superconvergent and strongly divergence-free velocity by applying a local postprocessing technique on the approximate solution. We will analyze the stability and derive a priori error estimates of the proposed scheme. The resulting nonlinear system is solved by using the Newton's method, and some numerical results will be demonstrated to confirm the theoretical rates of convergence and superconvergence.
Solution Techniques for the Stokes System: A priori and a posteriori modifications, resilient algorithms

Markus Huber,Lorenz John,Petra Pustejovska,Ulrich Rüde,Christian Waluga,Barbara Wohlmuth

DOI: https://doi.org/10.48550/arXiv.1511.05759

2015-11-18

Abstract:This article proposes modifications to standard low order finite element approximations of the Stokes system with the goal of improving both the approximation quality and the parallel algebraic solution process. Different from standard finite element techniques, we do not modify or enrich the approximation spaces but modify the operator itself to ensure fundamental physical properties such as mass and energy conservation. Special local a~priori correction techniques at re-entrant corners lead to an improved representation of the energy in the discrete system and can suppress the global pollution effect. Local mass conservation can be achieved by an a~posteriori correction to the finite element flux. This avoids artifacts in coupled multi-physics transport problems. Finally, hardware failures in large supercomputers may lead to a loss of data in solution subdomains. Within parallel multigrid, this can be compensated by the accelerated solution of local subproblems. These resilient algorithms will gain importance on future extreme scale computing systems.

Numerical Analysis
A Pressure-Poisson Stabilized Finite Element Method for the Non-Stationary Stokes Equations to Circumvent the Inf–sup Condition

Jian Li,Liquan Mei,Yinnian He

DOI: https://doi.org/10.1016/j.amc.2006.03.030

IF: 4.397

2006-01-01

Applied Mathematics and Computation

Abstract:In this article, stabilized finite element methods are considered for the non-stationary Stokes equations, based on some lowest equal-order finite elements space pair (X"h,M"h) which do not satisfy the discrete inf-sup condition. The stability of two kinds of methods is derived under some regularity assumptions. Then, the convergence of the penalty method and the pressure-Poisson stabilized method is compared. The result shows that the former error limits the order of approximation to O(@e+h/@e), and the latter yields the optimal error estimate O(h).
High order compact augmented methods for Stokes equations with different boundary conditions

Kejia Pan,Jin Li,Zhilin Li

DOI: https://doi.org/10.1016/j.cpc.2024.109233

IF: 4.717

2024-05-11

Computer Physics Communications

Abstract:This paper is devoted to fourth order compact schemes and fast algorithms for solving stationary Stokes equations with different boundary conditions numerically. One of the main ideas is to decouple the Stokes equations into three Poisson equations for the pressure and the velocity via the pressure Poisson equation (PPE). The augmented strategy is utilized to provide numerical boundary conditions for the pressure. Different velocity boundary conditions require different interpolation strategies for the augmented methods. The augmented variable is solved by the GMRES method. A new simple and efficient preconditioning strategy has also been developed to accelerate the convergence of the GMRES iteration. Numerical examples presented in this paper confirmed the designed convergence order and the efficiency of the new methods.

physics, mathematical,computer science, interdisciplinary applications
A Stabilized Finite Element Method for the Stokes-Stokes Coupling Interface Problem

Hussain Shahid,Mahbub Md. Abdullah Al,Shi Feng

DOI: https://doi.org/10.1007/s00021-022-00694-3

IF: 1.907

2022-01-01

Journal of Mathematical Fluid Mechanics

Abstract:In this article, we present a stabilized finite element method to solve the Stokes-Stokes interface system. To couple the Stokes equations in two different domains, we utilize Nitsche's type interface conditions. Numerical instability arises due to the coupling conditions that produce the artificial energy transfer across the interface, which causes the local instability of the approximation of the pressure and velocity. In the present work, we propose a robust stabilized scheme by introducing a stabilization term and a consistency term to deal with the instability of the system, which also ensures the well-posedness of the algorithm. The continuity and weak coercivity are derived for the proposed stabilized scheme. The optimal convergence analysis is carried out rigorously. Finally, several numerical experiments are conducted to illustrate the applicability, validity, and efficiency of the numerical method for the Stokes-Stokes interface model.
Mixed Stabilized Finite Element Method for the Stationary Stokes-dual-permeability Fluid Flow Model

Md Abdullah Al Mahbub,Feng Shi,Nasrin Jahan Nasu,Yongshuai Wang,Haibiao Zheng

DOI: https://doi.org/10.1016/j.cma.2019.112616

IF: 6.588

2020-01-01

Computer Methods in Applied Mechanics and Engineering

Abstract:This article proposes a stabilized mixed finite element method to investigate the stationary Stokes-dual-permeability fluid flow model which couples the free flow region modeled by the Stokes equations and dual-porous medium modeled by the dual-permeability equations. The robust mixed finite element method developed here does not require any Lagrange multiplier but a mesh dependent stabilization term with a relaxation parameter is introduced essentially to ensure the numerical stability of the algorithm. The well-posedness and the optimal error estimate of the finite element scheme are derived. Furthermore, an iterative scheme is developed based on the traditional coupled algorithm. We prove that the iterative scheme converges to the coupled scheme, and the rate of convergence is estimated. The feature of the model is illustrated by considering five numerical examples which reveal the applicability of the fluid flow model as well as the accuracy of the numerical method.
Fully Discrete Finite Element Method Based on Pressure Stabilization for the Transient Stokes Equations

Tong Zhang,Yinnian He

DOI: https://doi.org/10.1016/j.matcom.2012.02.007

IF: 3.601

2012-01-01

Mathematics and Computers in Simulation

Abstract:In this work, a new fully discrete stabilized finite element method is studied for the two-dimensional transient Stokes equations. This method is to use the difference between a consistent mass matrix and underintegrated mass matrix as the complement for the pressure. The spatial discretization is based on the P"1-P"1 triangular element for the approximation of the velocity and pressure, the time discretization is based on the Euler semi-implicit scheme. Some error estimates for the numerical solutions of fully discrete stabilized finite element method are derived. Finally, we provide some numerical experiments, compared with other methods, we can see that this novel stabilized method has better stability and accuracy results for the unsteady Stokes problem.
A Nonconforming Virtual Element Method for the Stokes Problem on General Meshes

Xin Liu,Jian Li,Zhangxin Chen

DOI: https://doi.org/10.1016/j.cma.2017.03.027

IF: 6.588

2017-01-01

Computer Methods in Applied Mechanics and Engineering

Abstract:In this paper, a nonconforming virtual element method for the Stokes problem is proposed and investigated. This method gives a unified scheme for two and three dimensions simultaneously. In addition, it provides an attractive computational feature— treatment of general elements including non-convex and degenerate elements. Moreover, by choosing a proper low order velocity and pressure pair, we prove the discrete inf–sup condition for this method to obtain its solvability and stability. Furthermore, we show optimal energy norm error estimates for velocity and L2 norm error estimates for both velocity and pressure. Finally, a series of numerical experiments are performed to validate that this method has good stability and accuracy for the Stokes problem.
A Finite Element Method by Patch Reconstruction for the Stokes Problem Using Mixed Formulations.

Ruo Li,Zhiyuan Sun,Fanyi Yang,Zhijian Yang

DOI: https://doi.org/10.1016/j.cam.2018.12.017

IF: 2.872

2019-01-01

Journal of Computational and Applied Mathematics

Abstract:In this paper, we develop a patch reconstruction finite element method for the Stokes problem. The weak formulation of the interior penalty discontinuous Galerkin is employed. The proposed method has a great flexibility in velocity–pressure space pairs whose stability properties are confirmed by the inf–sup tests. Numerical examples show the applicability and efficiency of the proposed method.
Homotopy perturbation method based on Green function for solving non-linear singular boundary value problems

Xufeng Shang,Yubo Yuan

DOI: https://doi.org/10.1109/ICMLC.2011.6016817

2011-01-01

Abstract:Non-linear singular two-point boundary value problems arise in many branches of applied mathematics and physics such as gas dynamics, biology science, etc. In this paper, we present a high-accurate method to solve a class of this type equations by using Homotopy perturbation method(HPM) based on Green function. Some examples from physical model problems are given and the results reveal that the method is very effective and convenient in solving equations with singularity, where the convergence of the result is observed. The advantage of this method is employed to present a reliable framework to overcome the singularity behavior at the point x = 0 for all models.
Performance of Several Stabilized Finite Element Methods for the Stokes Equations Based on the Lowest Equal-Order Pairs

Jian Li,Yinnian He,Zhangxin Chen

DOI: https://doi.org/10.1007/s00607-009-0064-5

2009-01-01

Computing

Abstract:In this paper the performance of various stabilized mixed finite element methods based on the lowest equal-order polynomial pairs (i.e., P 1 − P 1 or Q 1 − Q 1 ) are numerically investigated for the stationary Stokes equations: penalty, regular, multiscale enrichment, and local Gauss integration methods. Comparisons between them will be carried out in terms of the critical factors: stabilization parameters, convergence rates, consistence, and mesh effects. It is numerically drawn that the local Gauss integration method is a favorite method among these methods.
LOCALLY STABILIZED FINITE ELEMENT METHOD FOR STOKES PROBLEM WITH NONLINEAR SLIP BOUNDARY

Yuan Li,Kaitai Li

2009-01-01

Abstract:Based on the low-order conforming finite element subspace (Vh, Mh) such as the P1-P0 triangle element or the Q1-P0 quadrilateral element, the locally stabilized finite element method for the Stokes problem with nonlinear slip boundary conditions is investigated in this paper. For this class of nonlinear slip boundary conditions including the subdifferential property, the weak variational formulation associated with the Stokes problem is an variational inequality. Since (Vh, Mh) does not satisfy the discrete inf-sup conditions, a macroelement condition is introduced for constructing the locally stabilized formulation such that the stability of (Vh, Mh) is established. Under these conditions, we obtain the H 1 and L 2 error estimates for the numerical solutions.
Numerical Investigations on Several Stabilized Finite Element Methods for the Stokes Eigenvalue Problem

Pengzhan Huang,Yinnian He,Xinlong Feng

DOI: https://doi.org/10.1155/2011/745908

IF: 1.43

2011-01-01

Mathematical Problems in Engineering

Abstract:Several stabilized finite element methods for the Stokes eigenvalue problem based on the lowest equal-order finite element pair are numerically investigated. They are penalty, regular, multiscale enrichment, and local Gauss integration method. Comparisons between them are carried out, which show that the local Gauss integration method has good stability, efficiency, and accuracy properties, and it is a favorite method among these methods for the Stokes eigenvalue problem.
A Stabilized Finite Element Method Based on Two Local Gauss Integrations for the Stokes Equations

Jian Li,Yinnian He

DOI: https://doi.org/10.1016/j.cam.2007.02.015

IF: 2.872

2008-01-01

Journal of Computational and Applied Mathematics

Abstract:This paper considers a stabilized method based on the difference between a consistent and an under-integrated mass matrix of the pressure for the Stokes equations approximated by the lowest equal-order finite element pairs (i.e., the P1–P1 and Q1–Q1 pairs). This method only offsets the discrete pressure space by the residual of the simple and symmetry term at element level in order to circumvent the inf–sup condition. Optimal error estimates are obtained by applying the standard Galerkin technique. Finally, the numerical illustrations agree completely with the theoretical expectations.
Stable and locally mass- and momentum-conservative control-volume finite-element schemes for the Stokes problem

Martin Schneider,Timo Koch

2023-09-01

Abstract:We introduce new control-volume finite-element discretization schemes suitable for solving the Stokes problem. Within a common framework, we present different approaches for constructing such schemes. The first and most established strategy employs a non-overlapping partitioning into control volumes. The second represents a new idea by splitting into two sets of control volumes, the first set yielding a partition of the domain and the second containing the remaining overlapping control volumes required for stability. The third represents a hybrid approach where finite volumes are combined with finite elements based on a hierarchical splitting of the ansatz space. All approaches are based on typical finite element function spaces but yield locally mass and momentum conservative discretization schemes that can be interpreted as finite volume schemes. We apply all strategies to the inf-sub stable MINI finite-element pair. Various test cases, including convergence tests and the numerical observation of the boundedness of the number of preconditioned Krylov solver iterations, as well as more complex scenarios of flow around obstacles or through a three-dimensional vessel bifurcation, demonstrate the stability and robustness of the schemes.

Numerical Analysis
The Finite Volume Method Based on Stabilized Finite Element for the Stationary Navier–Stokes Problem

Guoliang He,Yinnian He,Xinlong Feng

DOI: https://doi.org/10.1016/j.cam.2006.07.007

IF: 2.872

2007-01-01

Journal of Computational and Applied Mathematics

Abstract:A finite volume method based on stabilized finite element for the two-dimensional stationary Navier–Stokes equations is investigated in this work. A macroelement condition is introduced for constructing the local stabilized formulation for the problem. We obtain the well-posedness of the FVM based on stabilized finite element for the stationary Navier–Stokes equations. Moreover, for quadrilateral and triangular partition, the optimal H1 error estimate of the finite volume solution uh and L2 error estimate for ph are introduced. Finally, we provide a numerical example to confirm the efficiency of the FVM.

Modified Homotopy Perturbation Method for Solving the Stokes Equations

Application of Modified Homotopy Perturbation Method for Solving the Augmented Systems

Stokes coupling method for the exterior flow Part IV: stabilized finite element approximation

Application of Homotopy Perturbation Method to the Bratu-Type Equations

Discontinuous Galerkin Method with Staggered Hybridization for a Class of Nonlinear Stokes Equations

Solution Techniques for the Stokes System: A priori and a posteriori modifications, resilient algorithms

A Pressure-Poisson Stabilized Finite Element Method for the Non-Stationary Stokes Equations to Circumvent the Inf–sup Condition

High order compact augmented methods for Stokes equations with different boundary conditions

A Stabilized Finite Element Method for the Stokes-Stokes Coupling Interface Problem

Mixed Stabilized Finite Element Method for the Stationary Stokes-dual-permeability Fluid Flow Model

Fully Discrete Finite Element Method Based on Pressure Stabilization for the Transient Stokes Equations

A Nonconforming Virtual Element Method for the Stokes Problem on General Meshes

A Finite Element Method by Patch Reconstruction for the Stokes Problem Using Mixed Formulations.

Homotopy perturbation method based on Green function for solving non-linear singular boundary value problems

Performance of Several Stabilized Finite Element Methods for the Stokes Equations Based on the Lowest Equal-Order Pairs

LOCALLY STABILIZED FINITE ELEMENT METHOD FOR STOKES PROBLEM WITH NONLINEAR SLIP BOUNDARY

Numerical Investigations on Several Stabilized Finite Element Methods for the Stokes Eigenvalue Problem

A Stabilized Finite Element Method Based on Two Local Gauss Integrations for the Stokes Equations

Stable and locally mass- and momentum-conservative control-volume finite-element schemes for the Stokes problem

The Finite Volume Method Based on Stabilized Finite Element for the Stationary Navier–Stokes Problem