Formation and distribution of polycyclic aromatic hydrocarbons (PAHs) derived from coal seam combustion: A case study of the Ulanqab lignite from Inner Mongolia, northern China
Shuqin Liu,Caihong Wang,Shangjun Zhang,Jie Liang,Feng Chen,Ke Zhao
DOI: https://doi.org/10.1016/j.coal.2011.11.005
IF: 6.3
2012-01-01
International Journal of Coal Geology
Abstract:Coalfield fires are hazardous to the environment and human health as a result of the release of polycyclic aromatic hydrocarbons (PAHs). The incomplete combustion processes of the Ulanqab lignite from Inner Mongolia of northern China during coalfield fires were simulated in a tubular furnace, and 16 US Environmental Protection Agency priority pollutant PAHs in the flue gas were absorbed and analyzed. The results indicate that incomplete combustion results in a clear increase in PAH emission compared with other combustion methods; this is attributed to the formation of species with two and three benzene rings, such as naphthalene, acenaphthylene, and acenaphthene. Benzo[a]pyrene, dibenz[a,h]anthracene, and benz[a]anthracene make a large contribution to the toxicity equivalent value (TEQ), although they make up a small proportion of the PAHs. With temperature increasing, the total PAH yield peak occurs at 800°C with a yield of 923.41mg/kg at an air/coal ratio of 1m3/kg. As the air/coal ratio increases, the amount of PAHs varies with the addition of oxygen. At a ratio of 2m3/kg, the minimum PAH yield of 486.07mg/kg occurs at 800°C and the maximum concentrations of the most toxic species, benzo[a]pyrene, and dibenz[a,h]anthracene, are found. Increasing the coal particle size from 0.25 to 20mm results in a significant growth of both the yields and TEQs of the PAH species.