Abstract:Biomass is one of the promising alternative materials to solve the energy and environmental crisis. Fast pyrolysis is one of the most economical and commercially realizable technologies to convert biomass to useable fuels and chemicals. To improve the liquid products, co-pyrolysis with polypropylene (PP) over a mesoporous catalyst MCM-41 was studied in this paper. Thermogravimetry Fourier transform infrared spectroscopy (TG-FTIR) and pyrolysis gas chromatography mass spectrometry (Py-GC MS) were used as the main analysis methods to study the mass loss and detailed products of the co-pyrolysis. The mass loss, main functional groups, and identified products of pyrolysis of cellulose, PP, and their mixture were analyzed and discussed. All of the TG, FTIR, and Py-GC MS data show that there is no significant synergism between cellulose and PP when simply mixing them, although the C/H-eff of the mixture increases from 0 to 1.3. However, the addition of MCM-41 bring significant synergism. The TG and differential thermogravimetry (DTG) data show that the co-pyrolysis with MCM-41 shifts the decomposition of PP to a lower temperature, which provides more overlap between cellulose and PP in the range of 300-400 degrees C. According to the FTIR spectra, CO, CO2, and carbonyl are also produced in the peak for pyrolysis of PP for the mixture together with MCM-41, which indicates the intermolecular synergetic reaction. Furthermore, the results from Py-GC MS show that olefins (43.9%), oxygenated compounds (24.8%, mainly alcohols), and aromatics (17.8%) are the main products of co-pyrolysis of cellulose and PP in the presence of MCM-41, while oxygenated compounds (82.2%, mainly saccharides), olefins (4.7%), and aromatics (1.1%) will be the main products without the catalyst. Olefins and alcohols are Much more than the calculated value, which is the main result of synergism. Alcohols are mainly produced from the radical from the cracking of PP combined with the hydroxyl radical produced from decomposition of cellulose. Olefins are produced from the interaction reaction (carbenium ion reaction and beta-scission) between the primary products of cellulose and the hydrocarbon pool reaction of primary products of cellulose and PP. The results of this study enhance the understanding of co-pyrolysis of cellulose and PP in the presence of MCM-41 and provide the possible pathway of modifying the special pyrolysis products in catalytic pyrolysis of biomass with polymers.

The Difference of the Gaseous Fractions by Copyrolysis of Biomass and Polyolefin

Copyrolysis of Biomass and Synthetic Polymer Mixtures and Gas Chromatographic Analysis of Gaseous Hydrocarbons

Characterizations of the gaseous fractions by catalytic copyrolysis of biomass and polypropylene

Catalytic thermal cracking of mixtures of bamboo waste and polypropylene

Experimental Study on Bio-Oil Model Compound Copyrolysis to Hydrocarbons

Thermal behavior and kinetics of bio-ferment residue/coal blends during co-pyrolysis

Influence of temperature, residence time, and solvent/feedstock mass ratio on overall product distribution and oil products quality in ethanol liquefaction of 230 polypropylene impact copolymer

A Study of Copyrolysis Characteristics of Sewage Sludge and Waste Polypropylene

Comparison of lignocellulosic-based biomass pyrolysis processes by multi-scale molecular characterization

Copyrolysis Behavior of Xylan and Polyvinyl Chloride Plastic

Analysis and Control of Products Obtained From Pyrolysis of Polypropylene Using A Reflux Semi-batch Reactor and GC-MS/FID and FT-ICR MS

Experiment Research on Biomass Mixture Pyrolysis by Fix-Bed

Factors Influencing Synergistic Pyrolysis of Biomass and Polypropylene for Alcohols and Hydrocarbon Production

Synergetic Effect of Co-pyrolysis of Cellulose and Polypropylene over an All-Silica Mesoporous Catalyst MCM-41 Using Thermogravimetry–Fourier Transform Infrared Spectroscopy and Pyrolysis–Gas Chromatography–Mass Spectrometry

Co-pyrolysis of different torrefied Chinese herb residues and low-density polyethylene: Kinetic and products distribution

Co-pyrolysis of Oil Sludge with Hydrogen-Rich Plastics in a Vertical Stirring Reactor: Kinetic Analysis, Emissions, and Products

Products of High-Grade Liquid Fuels by Biomass Fast Pyrolysis

Production and Optimization of Energy Rich Biofuel through Co-Pyrolysis by Utilizing Mixed Agricultural Residues and Mixed Waste Plastics

Key Element Course-Tracked Copyrolysis of Sewage Sludge and Biomass for Resource Recovery and Pollution Control Through Kinetic and Thermodynamic Insights

Catalytic copyrolysis of metal impregnated biomass and plastic with Ni‐based HZSM‐5 catalyst: Synergistic effects, kinetics and product distribution

Recent Advances and Perspectives of Copyrolysis of Biomass and Organic Solid Waste