Abstract:Although there are various methods to measure the modulation transfer function (MTF) of charge-coupled devices (CCD). the interferometric fringe pattern method has advantages over others, such as canted slit sources, bar targets, knife-edge, laser-speckle patterns, random noise pattern, etc. Our interferometric method is relatively simple and versatile: It requires no critical optics and no focusing or precision alignment, the entry array is tested, the contrast ratio of the test pattern is high enough, the spatial frequency of the fringe pattern can vary continuously. Our method generates the formation of a sinusoidal intensity fringe pattern by the interference of two monochromatic plane waves, and straightforward projects it onto the CCD array under test. The construction of the experimental device is based on the Fresnel Double-Mirror structure. A 2.5 mw He-Ne laser with the wavelength of 632.8 nm is used as the light source, the laser beam is spatially filtered by a 10 mu m pinhole and expanded to a diameter of 30 mm, and the resulting wave front is divided by two mirrors, which incline to each other at a small angle, and interfered. One of the mirrors is rotatable to vary the frequency of the pattern. The CCD array is mounted on a stage, which is also rotatable to make that the CCD array takes different angle with the fringe pattern direction, to receive the patterns. With the method we provided, the spatial frequency can be extended to some 2 times the Nyquist frequency of the CCD array to study the aliasing effect. In the Cartesian coordinates, the x- and y- axis MTFs (at angle 0 degrees and 90 degrees) of the CCD array were measured, the other three MTFs (at angle 26.56 degrees, 45 degrees and 63.44 degrees), which nobody has done before, were also tested offering a more comprehensive characterization of the CCD array.

The Height Variance Range for One Frequency Fringe Pattern Profilometry

Modulation transfer function measurement of charge-coupled devices using frequency-variable fringe patterns

Fourier Transform Profilometry Using Zero Frequency Elimination Based on Gray Modulation

Surface Measurement Methods Based on Single and Multi-Frequency Fringes and Its Applications in Reverse Engineering

Long Range Topography by Dispersion Unmatched Spectral-Domain Interferometry Based on Virtually Imaged Phased Array Modes

3D Measurement System Based on Computer-Generated Gratings

High-accuracy Three-dimensional Measurement by Improving the Asymmetry of Dithered Patterns

Depth-driven variable-frequency sinusoidal fringe pattern for accuracy improvement in fringe projection profilometry.

Threshold-optimized Dithering Technique for High-quality 3D Shape Measurement

Optimized dithering technique in frequency domain for high-quality three-dimensional depth data acquisition

Defocus-driven Variable-shape Fringe for Accuracy Improvement in Fringe Projection Profilometry

Phase Demodulation Method for Fringe Projection Measurement Based on Improved Variable-Frequency Coded Patterns

Improved Dual-Frequency On-Line Phase Measuring Profilometry Based On Full-Cycle Equal Phase-Shift Algorithm

A New Method Using Orthogonal Two-Frequency Grating in Online 3d Measurement

High dynamic range 3D measurements with fringe projection profilometry: a review

Phase and fringe order determination in wavelength scanning interferometry

High dynamic range fringe pattern acquisition based on deep neural network

Multi-view fringe projection profilometry for surfaces with intricate structures and high dynamic range

Estimation of global visibility for low-quality fringe pattern using Fourier-polar transform

Accurate measurement of high-reflective surface based on adaptive fringe projection technique

Calculation of Fringe Angle with Enhanced Phase Sensitivity and 3D Reconstruction