Abstract:Adaptive arrays have been widely used for interference mitigation in Global Navigation Satellite System (GNSS) receivers. Unlike adaptive nulling, adaptive beam-forming generates a dedicated beam in the antenna pattern towards each individual satellite and form nulls in the interference directions at the same time. Thus, the satellite signals are enhanced while interferences are mitigated, resulting in improved signal-to-interference-plus-noise ratio (SINR). In previous literature mainly two categories of beam-forming mechanisms are recommended, namely the array synthesis method and the so-called "blind" beam-forming method. The array synthesis method calculates the steering vector directly, but needs a cumbersome correction procedure dealing with the non-ideal factors of the antenna array and radio frequency (RF) channels. The blind beam-forming method generates the steering vector on-the-fly using carrier phases collected by auxiliary tracking channels, thus avoids the correction procedure, but has a limited performance against interferences. As an alternative, we proposed a different beam-forming method, which can be regarded as a combination of the two above. This method consists of two steps. In the calibration step, a carrier phase look up table (LUT) is obtained using the live-sky signals. In the beam-forming step, the steering vector is generated by looking up the LUT. This method doesn't need a cumbersome non-ideal factor correction procedure, and has a good anti-interference performance, thus can be a third option for beam-forming.In order to implement and validate this method, a software-defined approach is used. Two real-time software receivers, one for the calibration step and one for the beam-forming step are designed and implemented. In order to meet the real-time requirement, a graphics processing unit (GPU) is used as an accelerator. A batched programming technique is used to fully take advantage of the parallelism offered by the GPU. Software design and programming details are introduced. Experiments are conducted in real environment and results are given. It concludes that this method has a good beam-forming performance in improving C/N-0 and getting more precise positioning results.

Interference Cancellation in GPS Receiver Using Noise Subspace Tracking Algorithm.

Approach to Adaptive Cancellation of Strong Interference Pulse in Sonar

Cascaded Multitype Interferences Suppression Method Using Sparse Representation and Array Processing for GNSS Receiver

Narrowband Interference Cancellation using Set-membership Adaptive Predictor for GPS Receiver

A Two-Stage Interference Suppression Scheme Based on Antenna Array for GNSS Jamming and Spoofing

Oblique Projection Beamforming GPS Anti-jamming Algorithm

A Near-Far Effect Canceller for GPS High Sensitivity Receiver

An Anti-Jamming Null-Steering Control Technique Based on Double Projection in Dynamic Scenes for GNSS Receivers

Robust Wideband Interference Suppression Method for GNSS Array Antenna Receiver via Hybrid Beamforming Technique

A Satellite Navigation Signal Acquisition and Interference Suppression Method in a Complex Electromagnetic Environment

Experimental Research on Narrowband Interference Suppression of GNSS Signals

Research on Narrowband Interference Suppression Algorithm for Satellite Navigation Receiver

GPS Receiver Performance Simulation and Analysis under Strong Interference

A Reduced Complexity Cross-correlation Interference Mitigation Technique on a Real-time Software-defined Radio GPS L1 Receiver

Optimal GPS Acquisition Algorithm in Severe Ionospheric Scintillation Scene

Research on Space-Time Anti-jamming Algorithm of Beidou Navigation Receiver

Interference Cancellation and Coordination Scheme for Sounding Reference Signal in Multiple-Beam Mobile Satellite Communication System.

Multi-Stage Parameter Prediction Based Adaptive Anti-Jamming Method

A Modified Anti-Jamming Method Using Dual-Polarized Ellipsoid Minimum Variance Distortionless Response to Predict the Coverage Ratio of Global Positioning System Signal

Joint Pulsed and Continuous Wave Interference Suppression for Dual-Antenna GNSS Receivers

A Two-Step Beam-Forming Method Based on Carrier Phases for Gnss Adaptive Array Anti-Jamming