Abstract:In recent years, piezoelectric actuators, represented by inertial and inchworm actuators, have been widely applied because of their high accuracy and excellent responsiveness. Despite the development of various piezoelectric actuators, there remain some flaws in this technology. The sticking point is that the piezoelectric actuators based on the friction driving principle are prone to unwanted backward motion when outputting stepping motion. It is thus urgent to explore solutions from the perspectives of principle and structure. In this paper, a clamping-drive alternating operation piezoelectric actuator is proposed, the two feet of which are driven by two piezoelectric stacks, respectively. Due to double-foot alternate drive guide movement, backward movement is prevented in theory. By adopting the double-layer stator structure, integrated processing and assembly are facilitated. Meanwhile, a double flexible hinge mechanism is installed in the stator to prevent the drive foot from being overturned due to ineffectiveness and premature wear. In addition, the stator is equipped with the corresponding preload mechanism and clamping device. After the cycle action mechanism of one cycle and four steps is expounded, a model is established in this study to further demonstrate the principle. With the prototype produced, a series of experiments are performed. In addition, the amplitude of actuation of the stator is tested through amplitude experiment. The performance of the stator is evaluated by conducting experiments in the alternating step and single step actuation modes. Finally, the test results are analyzed to conclude that the actuator operating in either of these two modes can meet the practical needs of macro and micro actuation.

Experimental Research of a New Piezoelectric/Electrorheological Hybrid Hydraulic Step Actuator

Design and Experimental Evaluation of a Novel Stepping Linear Piezoelectric Actuator

Piezoelectric Actuator and Its Application in Hydraulic Valves

Numerical Analysis and Experimental Investigation of a Piezoelectric-Hydraulic Hybrid Actuator With Two Thin Plate Resonators

Design and Experimental Study of a Stepping Piezoelectric Actuator with Large Stroke and High Speed

Design and Identification of a Double-Acting Piezoelectric-Hydraulic Hybrid Actuator

Research for A New Actuator with Variable Step and Large Displacement

Design and Research of a Piezoelectric-Hydraulic Hybrid Actuation System with a Half-Wave Resonator

A Long Stroke Linear Stepping Piezoelectric Actuator Using Two Longitudinal-Bending Hybrid Transducers

Design and development of a piezoelectric-hydraulic hybrid actuator with quarter-wavelength tubes

Development of a Novel High Precision Piezoelectric Linear Stepper Actuator

Design and Experiment of a Clamping-Drive Alternating Operation Piezoelectric Actuator

A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source

Development of a Resonant Piezohydraulic Hybrid Actuator.

Design, analysis and experimental performance of a stepping type piezoelectric linear actuator based on compliant foot driving

Novel Design, Analytical and Experimental Studies of a Piezoelectric Ultrasonic Linear Actuator Based on Binate Feet Driving

Design and Experimental Evaluation of a Stepper Piezoelectric Actuator Using Bending Transducers.

Design and Testing of a Multi-Cylinder Piezopump for Hydraulic Actuation

The Working Principle and Excitation Method of A Step Peristalsis Piezoelectric Actuator

Design and Experimental Investigation of a Novel Stick-Slip Piezoelectric Actuator Based on V-shaped Driving Mechanism

Design and testing of a high power piezo pump for hydraulic actuation