Abstract:Journal of Intelligent Material Systems and Structures, Ahead of Print. To solve the problems of poor transmission performance and small torque regulation range of traditional MR device, a variable working gap MRF transmission device driven by electromagnetic force is proposed. The device uses electromagnetic force driving the squeeze disk to move axially to squeeze the MRF, thereby changing the number of working gaps and effective working thickness of the MRF to improve the transmission performance of the MR device. Based on the coil magnetization effect, the relationship between current, magnetic field intensity, and electromagnetic force is established. According to the driving characteristics of electromagnetic force and the rheological characteristics of MRF, a nonlinear function relationship between electromagnetic force and MRF working gap thickness and working volume is derived. Using the finite element method, a theoretical analysis of the magnetic circuit design, magnetic field distribution and temperature change profile in different parts of MRF device with different currents was conducted, the MRF torque transfer equations were deduced and calculated, and experimentally verified the correctness of the theoretical equations. Finally, the transmission performance of the variable working gap MRF transmission device is tested through the established testing system. Results show that, the required squeeze force is 6.65 kN when the MRF thickness reaches 1 mm in both working gaps. As the current increases from 0.5 to 3.0 A, the electromagnetic force increases from 0.65 to 6.77 kN, with an increase of 972.3%, the average temperature of the MRF in working gap I increases from 25.2°C to 71.2°C and the MRF in working gap II increases from 23.5°C to 48.3°C. When the current is 1.5 A, the MRF in the working gap I reaches magnetic saturation, continue to increase the current to 3.0 A, the MRF thickness in both working gaps is 1 mm, and the MR device transmits torque reach 376.6 N·m, which is 72.3% higher than that of the traditional MR device.

The Scheme Design and Application of Large Gap Magnetic Drive System Which is Driven by Traveling Wave Magnetic Field

Magnet circuit design and optimization of giant magnetostrictive transducer

Closed-Double-Magnetic Circuit for A Long-Stroke Horizontal Electromagnetic Vibration Exciter

Dynamic and static characteristics analysis of air-gap magneticfield of a large displacement angular vibrator

Analytical Calculation and Parameter Analysis of Air-Gap Magnetic Field Distribution in Permanent Magnet Synchronous Motor With Partition-Between-Poles Halbach Magnet

Design and Analysis of Parallel Hybrid-Excited Superconducting Linear Motor for High-Speed Electromagnetic Suspension Maglev

Simulation and Experimental Study of the Coupling Drive Magnetic Field for Embedded Giant Magnetostrictive Actuators

Modeling and Realization of Multiphase Permanent Magnet Synchronous Motor Variable Speed System

DESIGN FOR ELLIPSE MOTION DRIVEN MOTOR MADE OF GIANT MAGNETOSTRICTIVE MATERIAL

A STUDY ON FORCE CHARACTERISTIC OF LARGE AIRGAP LINEAR INDUCTION MOTOR

Design and Analysis of a High Efficient Multi-Segment Redundancy Linear Motor

Principle And Realization Of A 5-Phase Pm Bearingless Motor Drive

A Control Scheme for a High Speed Railway Traction System Based on High Power PMSM

Modeling and Design of a Dual‐Stator Low‐Speed High‐Torque Permanent Magnet Drive Machine for the Ball Mill Application

Large-Airgap High-Speed Permanent Magnet Machines for Flywheel System Applications

Magnetic Circuit Design and Experiment of Novel Lorentz Magnetic Bearing with Double Air Gap

Magnetic field analysis of Primary Permanent Magnet Linear Motor Based on Halbach Distribution

Design and Optimization of Levitation Gap Sensors for High-speed Maglev trains

Design and 2D Finite Element Analysis for a Novel Magnetic Gear Integrated Brushless Permanent Machine

Analysis and experimentation of variable gap magnetorheological transmission device driven by electromagnetic force

Modeling and Simulation of Field Oriented Controlled Large Air-gap Linear Induction Motor