Abstract:The isothermal tensile test of medium carbon steel material was conducted at deformation temperatures varying from 650 to 950 ∘ C with an interval of 100 ∘ C and strain rates ranging from 0.05 to 1.0 s − 1 . In addition, the scanning electron microscopy (SEM) procedures were exploited to study about the surface morphology of medium carbon steel material. Using the experimental data, the artificial neural network (ANN) model with a back-propagation (BP) algorithm was proposed to predict the hot deformation behavior of medium carbon steel material. For model training and testing purpose, the variables such as deformation temperature, strain rate, and strain data were considered as inputs and the flow stress data were used as targets. Before running the neural network, the test data were normalized to effectively run the problem and after solving the problem, the obtained results were again converted in order to achieve the actual data. According to the predicted results, the coefficient of determination ( R 2 ) and the average absolute relative error between the predicted flow stress and the experimental data were determined as 0.999 and 1.335%, respectively. For improving the model predictability, the constrained nonlinear function based optimization procedures was adopted to obtain the best candidate selections of weights and biases. By evaluating each test conditions, it was found that the average absolute relative error based on the optimized ANN-BP model varied from 0.728% to 1.775%. Overall, the trained ANN-BP models proved to be much more efficient and accurate by means of flow stress prediction against the experimental data for all the tested conditions. These optimized results displayed that an ANN-BP model is more accurate for flow stress prediction than that of the conventional flow stress models.

Modeling of Nonlinear Deformation Considering Temperature and Hydrostatic Pressure Using Genetic-Neural Networks

Nonlinear Semi-Parametric Modeling Mothed Based on GA-ANN

Thermal Deformation Defect Prediction for Layered Printing Using Convolutional Generative Adversarial Network

Nonlinear semi-parametric modeling method based on GA-ANN

Modelling of Electrohydraulic System Using RBF Neural Networks and Genetic Algorithm

Adaptive and intelligent prediction of deformation time series of high rock excavation slope

Evolutionary Identification of Deformation Dynamics of Geotechnical Structures

Dam Deformation Forecasting by Evolving Artificial Neural Network

Simultaneous identification of structural damage and nonlinear hysteresis parameters by an evolutionary algorithm-based artificial neural network

Deformation Prediction of Landslide Based on Genetic-Simulated Annealing Algorithm and BP Neural Network

Flow Stress Prediction of High-Nb TiAl Alloys under High Temperature Deformation

Modeling Constitutive Relationship of Ti40 Alloy Using Artificial Neural Network

Study of dam deformation model based on neural network

Modeling Crop Yield Response To Water And Nitrogen With Artificial Neural Networks Based On Genetic Algorithms

A Hybrid Evolutionary Neural Network Method in Identifying Nonlinear Characteristics of Packaging

Dynamic Behavior and Modified Artificial Neural Network Model for Predicting Flow Stress During Hot Deformation of Alloy 925

Hybrid Artificial Neural Network-Based Models to Investigate Deformation Behavior of AZ31B Magnesium Alloy at Warm Tensile Deformation

A Neural Network Based on Genetic Algorithm for Structural Damage Detection

Prediction of Flow Stresses at High Temperatures with Artificial Neural Networks

Hybrid Machine Learning Optimization Approach to Predict Hot Deformation Behavior of Medium Carbon Steel Material