Abstract:The core used to build power inductors and transformers are soft magnetic materials. When there is alternating external field, the magnetic moments rotate and consume energy, which is the core loss. The core loss depends on the AC flux frequency, amplitude, waveform, DC bias and temperature. These dependences are nonlinear and difficult to predict. How to measure, model and analyze the core loss is a challenge for decades. In this dissertation, two new core loss measurement methods are introduced first. These two methods use the reactive cancellation concept to reduce the sensitivity to phase discrepancy, which will destroy the accuracy in classic two-winding method for high frequency high quality factor sample measurements. By using the new measurement techniques the accuracy can be improved by several orders. The first is for sinusoidal waveforms, and the second is for non-sinusoidal wave. The new methods enable high frequency core loss characterization capability, which will help scientists and engineers on material research and inductor/transformer design. Measurement examples, considerations and error analysis are demonstrated and discussed in detail. With the measurement techniques, the core loss under rectangular AC voltage and DC bias current are investigated. A new core loss model named rectangular extension Steinmetz equation (RESE) is proposed based on the measurement results. The new iii model is shown to be more accurate than the existing core loss models. Several commercially available MnZn ferrites are characterized and modeled. Other than conventional MnZn ferrite materials, three commercial LTCC ferrite materials are characterized for integrated power supply applications. Based on characterized properties of these LTCCs, a group of new LTCC ferrites are fabricated and tested. The new LTCC is fabricated by laminating commercial LTCC tapes and co-firing. The new LTCC is demonstrated to have over 50% more inductance over the commercial LTCC materials. This work indicates that the power electronics engineers should work with material engineers to get the optimum material for a given application. In the last part, the core loss of the partially saturated lateral flux planar inductor is analyzed. The challenge of the analysis is the complexity of the distribution of bias field and flux density in a highly biased planar inductor. Each point in the core is working at different excitation and bias condition, and the core loss density is very non-uniform. The proposed method combines the characterization tested in previous chapters and the commercial finite element tool. Experiments verified that the calculation errors are within about 10%. In conclusion, the research in this dissertation proposed a complete solution to measure, model and analyze the high frequency core loss. This solution will not only facilitate fundamental research on physics understanding and material innovation, but also development of power electronics and RF applications.

Study on core loss of high speed PM machine

Analytical Modeling and Analysis of Open-Circuit Magnet Loss in Surface-Mounted Permanent-Magnet Machines

Analytical investigation of open-circuit eddy current loss in windings of PM machines

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

An Improved Core Loss Model of Ferromagnetic Materials Considering High-Frequency and Nonsinusoidal Supply

Measurement and Modelling of the Rotational Core Losses in an Induction Machine at Different Load Conditions

Effect Of Cutting And Slot Opening On Amorphous Alloy Core For High-Speed Switched Reluctance Motor

Study on Electromagnetic Losses in High-speed Permanent Magnet Brushless Machines-the State of the Art

Study On Air Friction Loss Of High Speed Pm Machine

Studies Of High-Frequency Iron Core Loss For Synchronous Electric Machines Used In Electric Vehicles

Improved calculation of core losses of high-speed motors with two different permanent magnets considering higher order current harmonics

Novel Empirical Model for Calculation of Core Losses in Permanent Magnet Machines

High Frequency Magnetic Core Loss Study

Calculation Method of Core Loss Under Intermediate Frequency Excitation

Comparative Analysis of Loss Distribution in Permanent Magnet Synchronous Machine and Vernier Machine

Development of Equivalent Circuit Models of Permanent Magnet Synchronous Motors Considering Core Loss

Slotted Permanent-Magnet Machines: General Analytical Model of Magnetic Fields, Torque, Eddy Currents, and Permanent-Magnet Power Losses Including the Diffusion Effect

Magnetic Field Characteristics and Stator Core Losses of High-Speed Permanent Magnet Synchronous Motors

Performance Analysis of a Coreless Axial-Flux Permanent Magnet Machine with Halbach PM Arrangement

Core loss analysis of soft magnetic composite under non-sinusoidal excitation based on finite element models

Loss Analysis of High Speed Permanent Magnet Synchronous Motor