Abstract:The dynamic model, particularly with reference to controller design, is an important issue in mechanical control and design. However, this model is often difficult to achieve in complex multi-closed-loop mechanisms, such as parallel mechanisms or forging manipulators. A new approach on the dynamic modeling of a multi closed-chain mechanism in a forging manipulator, which applies screw theory and the reduced system model, is proposed in this paper. The proposed method not only allows a straightforward calculation of actuator forces but also obtains the dynamic equation of the multi-closed-loop mechanism easily. The structure of dynamic model obtained is similar to that of standard Lagrangian formulations, which can extend vast control strategies developed for serial robots to complex multi-closed-loop mechanisms. A complex multi-closed-loop mechanism on a forging manipulator is decomposed into several serial mechanisms or simpler subsystems. The Lagrangian equations associated with each subsystem are directly derived from the local generalized coordinates of the sub-mechanisms. Jacobian matrices are used to interpret the differential equations of the sub-mechanisms into the generalized coordinate or the actuated pairs according to the D’Alembert principle. Hessian matrices are also applied to form a standard Lagrangian formulation. The screw theory is introduced to overcome the difficulties of solving transformed Jacobian matrices, thereby simplifying the calculation of the matrices. Computation difficulties of transformation matrices may decrease considerably by choosing suitable generalized coordinates instead of direct actuator variables. The full dynamics of the complex multi-closed-loop mechanism in a forging manipulator is presented. Simulations and experiments illustrate the reliability of the proposed method and the correctness of the dynamic model of the forging manipulator.

Performance Analysis of a Forging Manipulator Based on the Composite Modeling Method

Dynamic Modeling and Analysis for Coupling Processing 6-DOF 3 P3 R Manipulator

Modular Calculation of the Jacobian Matrix and Its Application to the Performance Analyses of a Forging Robot

Vertical Load Analysis of the Lifting Systems for Forging Manipulator During the Forging Process

Kinematic Modeling of a Serial-Parallel Forging Manipulator with Application to Heavy-Duty Manipulations#

Manipulation Performance Analysis of Heavy Manipulators

Dynamic Modeling and Analysis of Lifting Mechanism for Forging Manipulator

Control-orientated dynamic modeling of forging manipulators with multi-closed kinematic chains

Complete Kinematics/Dynamics Modeling and Performance Analysis of a Novel SCARA Parallel Manipulator Based on Screw Theory

Stiffness Modeling Approach for a 3-DOF Parallel Manipulator with Consideration of Nonlinear Joint Stiffness

Kinematic modeling of a heavy-duty forging manipulator

Dynamic Modeling of the Hybrid Manipulator

Kinematic Dexterity Performance Analysis of a Parallel Robot Manipulator

Evaluating Interactions Between the Heavy Forging Process and the Assisting Manipulator Combining FEM Simulation and Kinematics Analysis

Multiobjective Optimization for the Forging Manipulator Based on the Comprehensive Manipulation Performance Indices

Closed-Form Dynamic Modeling and Performance Evaluation of a 4-Degrees-of-freedom Parallel Driving Mechanism

Compliance Process Analysis for Forging Manipulator

Kinematics modeling and performance optimization of a kinematic-mechanics coupled continuum manipulator

Dynamic Modeling and Performance Analysis of the 3-PRRU 1T2R Parallel Manipulator Without Parasitic Motion

Dynamic Modeling and Performance Evaluation of a 5-DOF Hybrid Robot for Composite Material Machining

Analysis of kinematics of a five-axis hybrid manipulator