Abstract:Main memory (DRAM) consumes as much as half of the total system power in a computer today, resulting in a growing need to develop new DRAM architectures and systems that consume less power. Researchers have long relied on DRAM power models that are based off of standardized current measurements provided by vendors, called IDD values. Unfortunately, we find that these models are highly inaccurate, and do not reflect the actual power consumed by real DRAM devices. We perform the first comprehensive experimental characterization of the power consumed by modern real-world DRAM modules. Our extensive characterization of 50 DDR3L DRAM modules from three major vendors yields four key new observations about DRAM power consumption: (1) across all IDD values that we measure, the current consumed by real DRAM modules varies significantly from the current specified by the vendors; (2) DRAM power consumption strongly depends on the data value that is read or written; (3) there is significant structural variation, where the same banks and rows across multiple DRAM modules from the same model consume more power than other banks or rows; and (4) over successive process technology generations, DRAM power consumption has not decreased by as much as vendor specifications have indicated. Based on our detailed analysis and characterization data, we develop the Variation-Aware model of Memory Power Informed by Real Experiments (VAMPIRE). We show that VAMPIRE has a mean absolute percentage error of only 6.8% compared to actual measured DRAM power. VAMPIRE enables a wide range of studies that were not possible using prior DRAM power models. As an example, we use VAMPIRE to evaluate a new power-aware data encoding mechanism, which can reduce DRAM energy consumption by an average of 12.2%. We plan to open-source both VAMPIRE and our extensive raw data collected during our experimental characterization.

System-Level Early Power Estimation for Memory Subsystem in Embedded Systems

Dynamic Voltage Scaling of Flash Memory Storage Systems for Low-Power Real-Time Embedded Systems

Toward a Unified Performance and Power Consumption NAND Flash Memory Model of Embedded and Solid State Secondary Storage Systems

What Your DRAM Power Models Are Not Telling You: Lessons from a Detailed Experimental Study

A Novel Power Estimation Framework for SRAM-based FPGAs

Adaptive Energy-Aware Design Of A Multi-Bank Flash-Memory Storage System

An Efficient Power Estimation Approach for the Synchronous Data Transfer Architecture

Calibrating DRAMPower Model: A Runtime Perspective from Real-System HPC Measurements

Architecture-level energy model for high-capacity STT-MRAM memory

SDRAM Power Model and Instruction FIFO Optimization

A Real-Time Flash Memory Storage System in Embedded Environment

A Power and Temperature Aware DRAM Architecture

Architectural Power Models for Sram and Cam Structures Based on Hybrid Analytical/empirical Techniques

Study of Performance Evaluation of Embedded DRAM for System-on-a-Chip

Error Model Guided Joint Performance and Endurance Optimization for Flash Memory

A Performance Conserving Approach for Reducing Memory Power Consumption in Multi-Core Systems

A Hybrid Main Memory Architecture Design for Reducing DRAM System Refresh Power

Highly accurate power modeling method for SRAM structures with simple circuit simulation

A NAND Flash Endurance Prediction Scheme with FPGA-based Memory Controller System

Study on System-Level Power Model for Low Power Optimization

Utilizing PCM for Energy Optimization in Embedded Systems