Abstract:With the aging population and increasing labor costs, traditional manual harvesting methods have become less economically efficient. Consequently, research into fully automated harvesting using selective harvesting robots for cherry tomatoes has become a hot topic. However, most of the current research is focused on individual harvesting of large tomatoes, and there is less research on the development of complete systems for harvesting cherry tomatoes in clusters. The purpose of this study is to develop a harvesting robot system capable of picking tomato clusters by cutting their fruit‐bearing pedicels and to evaluate the robot prototype in real greenhouse environments. First, to enhance the grasping stability, a novel end‐effector was designed. This end‐effector utilizes a cam mechanism to achieve asynchronous actions of cutting and grasping with only one power source. Subsequently, a visual perception system was developed to locate the cutting points of the pedicels. This system is divided into two parts: rough positioning of the fruits in the far‐range view and accurate positioning of the cutting points of the pedicels in the close‐range view. Furthermore, it possesses the capability to adaptively infer the approaching pose of the end‐effector based on point cloud features extracted from fruit‐bearing pedicels and stems. Finally, a prototype of the tomato‐harvesting robot was assembled for field trials. The test results demonstrate that in tomato clusters with unobstructed pedicels, the localization success rates for the cutting points were 88.5% and 83.7% in the two greenhouses, respectively, while the harvesting success rates reached 57.7% and 55.4%, respectively. The average cycle time to harvest a tomato cluster was 24 s. The experimental results prove the potential for commercial application of the developed tomato‐harvesting robot and through the analysis of failure cases, discuss directions for future work.

Analysis of Workspace and Kinematics for a Tomato Harvesting Robot

Analysis on the Workspace of A Tomato Harvesting Manipulator with 7 Dof

Adaptive end‐effector pose control for tomato harvesting robots

Kinematic Analysis and Simulation of an Orange Harvesting Robot

Dual-arm Robot Design and Testing for Harvesting Tomato in Greenhouse

Kinematic Analysis of A New Hybrid Surgical Robot

Structural Parameter Optimization of a Tomato Robotic Harvesting Arm: Considering Collision-Free Operation Requirements

Motion Planning of a Tomato Harvesting Manipulator for obstacle Avoidance

The Control and Co-simulation of Picking Robot Arm

Fruit growing direction recognition and nesting grasping strategies for tomato harvesting robots

AHPPEBot: Autonomous Robot for Tomato Harvesting based on Phenotyping and Pose Estimation

Motion Planning of Tomato Harvesting Manipulators with 7 DOF

Developing a Realistic Simulation Environment for Robotics Harvesting Operations in a Vegetable Greenhouse

Design and Testing of an End-Effector for Tomato Picking

Greenhouse Tomato Picking Robot Chassis

Workspace Analysis of a Novel 5-SPS-UPU Parallel Robot Manipulator.

A selective harvesting robot for cherry tomatoes: Design, development, field evaluation analysis

Analysis and Design of an Auxiliary Catching Arm for an Apple Picking Robot

Kinematics Modeling and Analysis of a Novel Five-DoF Spraying Robot

Picking patterns evaluation for cherry tomato robotic harvesting end-effector design

Analysis of workspace for a harvesting manipulator based on Monte-Cario method