Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

Broken Rotor Bars Fault Detection in Induction Motors Using Park's Vector Modulus and FWNN Approach

Induction Motor Rotor Fault Diagnosis Method Based on Double PQ Transformation

BROKEN ROTOR BARS FAULT DIAGNOSIS OF INDUCTION MACHINES BASED ON WAVELET TRANSFORMATION OF ELECTROMAGNETIC TORQUE

Research on the Effect of Rotor Broken Bar Position on Induction Machine

Quantitative Broken Rotor Bar Fault Detection for Closed-Loop Controlled Induction Motors

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Rotor Broken Bar Fault Diagnosis for Induction Motors Based on Double PQ Transformation

Rotor Broken Bar Fault Diagnosis of Induction Motors Based on Feature Frequency Extraction of the Electromagnetic Torque Signal

Rotor Fault Diagnosis of Induction Motor Based on Wavelet Reconstruction

PQ Transformation and Rotor Fault Diagnosis for Large Induction Motors

Rotor Broken-Bar Fault Diagnosis of Induction Motor Based on HHT of the Startup Electromagnetic Torque

Motor Broken Rotor Bar Fault Diagnosis With Support Vector Machine

Fault Monitoring and Diagnosis of Induction Machines Based on Harmonic Wavelet Transform and Wavelet Neural Network

Rotor Faults Diagnosis in Rotor Field Oriented Controlled Induction Motors Based on Torque Current

Monitoring of Rotor Broken Bars Based on Air-gap Torque of Induction Motor

Broken-Rotor-Bar Diagnosis For Induction Motors

Diagnosis of Broken Rotor Bar Fault in Open- and Closed-Loop Controlled Wye-Connected Induction Motors Using Zero-Sequence Voltage

Support Vector Machine Used To Diagnose The Fault Of Rotor Broken Bars Of Induction Motors

MULTIPLE BANDWIDTH WAVELET ANALYSIS FOR FAULT DIAGNOSIS EIGENVALUE IN SQUIRREL-CAGE INDUCTION MOTOR

Fault Diagnosis of Rotor Broken Bar in Induction Motor Based on Successive Variational Mode Decomposition

Broken Rotor Bar Detection in Induction Motors Based on Air-Gap Rotational Magnetic Field Measurement