Abstract:Multi-component wastewater containing a variety of organic toxins, e.g., dyes and inorganic particulates induces serious environmental concerns, which must be addressed by innovative approaches instead of conventional chemical and physical processes, which are limited by purification efficiency, secondary pollution, and cost-effectiveness. Therefore, it is important to find new avenues of purification methods that are both sustainable and effective. Ultra-fine nanofibrous microfiltration membranes were fabricated by multi-nozzle electrospinning of polyamide-66 (PA-66) and were employed to remove 0.2-μm-nanoparticles and dyes simultaneously from wastewater through filtration and dynamic adsorption performance, in an attempt to discover a one-step filtration system for both dyes and nanoparticles. The fiber diameter and surface morphology of the nanofibrous membranes varied with the concentrations of polyamide solutions, where the ultra-fine nanofibrous membrane exhibited optimum mechanical properties at a specific concentration of PA-66 (11 wt%). The nanofibrous membranes ha d adsorption capabilities of 133.3 and 204.5 mg/g, respectively, against both anionic dyes (e.g., metanil yellow) and cationic dyes (e.g., chrysoidine), respectively. The membrane also selectively filtrated fine nanoparticles with a nearly 100% rejection ratio. A multiple separation mechanism, including adsorption based on electrostatic interaction, hydrogen bonding interaction, and hydrophobic interaction, as well as depth filtration, was proposed. As an applicable demonstration, the spiral wound cartridge fabricated by PA-66 nanofibrous membrane was used for a simulated multi-component wastewater treatment that contained dyes and nanoparticles of different concentrations. During the multicomponent test at flow rate 1 mL/min, a rejection rate of 97% and greater than 99% were achieved against dyes and nanoparticles, respectively.

Multi-factor coupled aging and recycling of meta-aramid filter bags

An efficient method to recycle and reuse meta-aramid from used dust filter bags

Chemical Recycling of Used PI/PTFE Sandwich Composite Filter Bags

Fouling is the beginning: upcycling biopolymer-fouled substrates for fabricating high-permeance thin-film composite polyamide membranes

Cleaning–Healing–Interfacial Polymerization Strategy for Upcycling Real End-of-Life Polyvinylidene Fluoride Microfiltration Membranes

Rapid Upcycling of End-of-Life Microfiltration Membrane Mediated by the Healing of Metal–Organic Complex

Preparation and Characterization of PMIA Nanofiber Filter Membrane for Air Filter

Preparation of high-temperature resistant poly (m-phenylene isophthalamide)/polyacrylonitrile composite nanofibers membrane for air filtration

Interfacial Wettability Regulation Enables One-Step Upcycling of the End-of-Life Polymeric Microfiltration Membrane

A sustainable and low pollutive strategy for the recycling of waste hot-gas filter bags: The development of filter reinforced epoxy composites

A synergistic strategy for fabricating a highly flexible poly(m‐phenylene isophthalamide) nanofiber‐reinforced polyimide aerogel for high‐temperature filtration

Toward High-Performance Fibrillated Cellulose-Based Air Filter Via Constructing Spider-Web-like Structure with the Aid of TBA During Freeze-Drying Process

Electrospun Carboxylated MWCNTs Modified PMIA Tree-like Nanofibrous Membrane with Excellent Thermal Stability and Chemical Resistance for Efficient Particulate Matter Removal

Electrospun Poly(m-phenyleneisophthalamide)/TiO 2 Nanofiber Membranes for Particulate Matter Removal under High-Temperature Conditions

Efficient and Sustainable Strategy for Recycling of Carbon Fiber-Reinforced Thermoset Composite Waste at Ambient Pressure

Surprising olefin/paraffin separation performance recovery of highly aged carbon molecular sieve hollow fiber membranes by a super-hyperaging treatment

Highly permeable nanofibrous polyamide membranes for multi-component wastewater treatment: Exploration of multiple separation mechanism

Development of an asymmetric composite PPS-based bag-filter material through membrane laminating and superfine fiber blending: Lab test, field application and development of numerical models

Fabrication of fully degradable branched poly (lactic acid) nanofiber membranes for high‐efficiency filter paper materials

Development of high-performance filter from Agave americana fibre/polyacrylonitrile nanofibre membrane for Cd, Pb (II) and organic contaminants removal from aqueous solution

Biodegradable Polybutyrolactam Microfiber Membrane as a Highly Efficient Air Filter for PM2.5 Particle Filtration