Abstract:Patchy cleaning is one of the principal factors resulting in the reduction of the efficiency and quality of reverse pulse-jet cleaning as well as the service lifetime of filtration units. To resolve the above issues, a new pleated cartridge shape was introduced in this study to improve the cleaning efficiency and quality of pleated filter cartridges. To calculate the transient flow and pressure fields for a simple filtration system with one filter cartridge in the reverse pulse-jet cleaning process, an unsteady computational fluid dynamics model was developed via the commercial computational fluid dynamics software of ANSYS CFX. The transient static pressure fields for filter cartridges under four different pleated cartridge shapes were studied. The conventional cylindrical cartridge was selected as the base-model of filter cartridge and contrasted with other three cartridge shapes. It was found that the convergent–divergent cartridge was able to effectively improve the cleaning performance without the increase of tank pressure. Different pleated cartridge shapes are expected to be able to redistribute the pressure drop across the porous media along the filter height and to improve the flow behavior after pulsing gas releasing from the nozzle. For convergent–divergent cartridge shape, the peak pressure on the inner surface of porous media has an obvious increase and the peak pressure arriving time is earlier than other cases. It shows that the reverse flow has much more competence to remove the dust powder or cake from the porous media. At the same time, the area-averaged pressure drop at the bottom section of the filter has an increase of 50% under the cartridge with a convergent–divergent shape compared to that with a cylindrical shape. It is considered to enhance the cleaning mechanical stress at the bottom section of the filter cartridge. The better cleaning performance was observed in the medium, with 150% increase compared to that with a cylindrical shape. Furthermore, the cleaning performance gets improved because the value enhances on the top section. The redistribution of pressure drop observed is mainly because the special geometric construction of pleated cartridges compresses the flow on the medium and produce higher pressure drop there. Further studies indicate that the improved cleaning performance was observable under the consideration of the tank pressure reduction and variation of media permeability during each cleaning phase, and the change of pleated cartridge shapes can also improve the cleaning performance when combined with other improvement methods.

The Relationship between the Resistance Characteristics and Structural Parameters of the Elongated Filter Cartridge in the Dust Collector

Influence of pleated geometry on the pressure drop of filters during dust loading process: experimental and modelling study

Experimental Study on Resistance Influencing Factors of Clean Filter Material Used in Air Purification

Numerical study of pleated fabric cartridges during pulse-jet cleaning

The effect of pleat ratio on the effective filtration area of the large-diameter pleated filter cartridge

Research on the influence of pleat structure on effective filtration area during dust loading

Simulation and test of flow process in air filter

A theoretical study on the filtration efficiency and dust holding performance of pleated air filters

The Structure-Resistance Relationship of High-Efficiency Particulate Air Filters

Performance optimization of rectangular flat pleated filter with slit nozzle for dust cleaning

Three-dimensional numerical simulation and structural optimization of filtration performance of pleated cylindrical metal fiber filter

Performance characterization of a novel compact dust collector with pleated filter cartridges

Influence of the inner diameter of the bottom plate on the cleaning performance of double-layer filter cartridges

The pressure drop of fibrous surface filters for gas Filtration: Modeling and experimental studies

Performance optimization of airliner cabin air filters

Study on the Filtration Performance of the Baghouse Filters for Ultra-Low Emission as a Function of Filter Pore Size and Fiber Diameter

Numerical study of the effects of cartridge shape on the reverse pulsed flow cleaning of pleated cartridge filters

A simple semi-numerical model for designing pleated air filters under dust loading

Dust dispersion during the pulse-jet cleaning process with the diffuser effect of the cartridge filter

Reverse pulsed-flow cleaning of pleated filter cartridges having an inner pleated filter cone

Assessment of various CFD models for predicting airflow and pressure drop through pleated filter system