Abstract:Supercapacitors, advanced electrochemical devices, have attracted great interest due to their extraordinary properties, such as high power density, fast charging or discharging rate, and ultra-long cycle life. Currently, great efforts have been devoted to increasing their moderate energy density (typically < 5 Wh.kg(-1)). Especially, room temperature ionic, liquids (RTILs) have been considered as a promising electrolyte for further improving supercapacitor's performances owing to their large voltage window, high thermal stability, and wide working temperature range. However, RTILs suffer from the high viscosity and poor conductivity stemming from their strong cation-anion interactions. In this work, we investigate the influences of solvent on the capacitive performance within RTIL-based supercapacitors. Activated graphene powders are employed as the electrode active materials, and 1-butyl-3-methyl-imidazolium tetrafluoroborate (BMIMBF4) is chosen as the electrolyte because of the wide applications in electrochemical energy storage. The mole fraction of BMIMBF4 (rho(IL)) in electrolytes can be regulated with adjusting the ratio of acetonitrile solvents (AN). Electrochemical measurements suggest that the solvent effects on the charge storage capability of supercapacitors depend strongly on the applied scan rate or current density. Specifically, at a lower scan rate of 10 mV.s(-1), solvent exhibits a negligible influence on the electrochemical performance; however, at an elevated scan rate of 200 mV.s(-1), solvent addition could prominently enhance the capacitance by similar to 2 folds. These results can resolve the controversial solvent effects reported in previous simulation and experimental studies. To interpret the as-obtained results, we further explore the solvent effects on the dynamic properties of electrolytes. It is found that solvent can effectively reduce the strong ion-ion interactions within pristine RTILs, thus decreasing the viscosity by similar to 29 times. Further electrical impedance spectroscopy tests suggest that the addition of solvent is able to significantly suppress the series resistance (by similar to 5.5 times) and dielectric relaxation time (by similar to 6.3 times), which thereby improves the rate capability of supercapacitors. We demonstrate that the maximum specific energy and power density of supercapacitor (rho(IL)= 0.25) are calculated to be 65.2 Wh.kg(-1) at 1 Ag-1 and 18066.6 W.kg(-1) at 20 Ag-1, respectively, among the best performances in the state-of-art literatures. More importantly, under an elevated working temperature of 50 degrees C, its energy density can reach up to 85.5 Wh.kg(-1) at 1 Ag-1, which is much higher than that of aqueous or organic solution based supercapacitors (< 10 Wh.kg(-1)) and lead-acid battery (20-35 Wh.kg(-1)), comparable to that of Ni metal hydride (40-100 Wh.kg(-1)) and lithium-ion battery (80-150 Wh.kg(-1)).

The rational design of poly (inoic liquid) for 4.0 V graphene-based supercapacitors

Ionic Liquid Modified Graphene for Supercapacitors with High Rate Capability

Flexible Solid‐State Supercapacitors with Enhanced Performance from Hierarchically Graphene Nanocomposite Electrodes and Ionic Liquid Incorporated Gel Polymer Electrolyte

Wet-spun Poly(ionic Liquid)-Graphene Hybrid Fibers for High Performance All-Solid-state Flexible Supercapacitors

A high-performance all-solid-state supercapacitor with graphene-doped carbon material electrodes and a graphene oxide-doped ion gel electrolyte

Rational design of active layer configuration with parallel graphene/polyaniline composite films for high-performance supercapacitor electrode

Graphene-based Li-ion Hybrid Supercapacitors with Ultrahigh Performance

All Graphene Lithium Ion Capacitor with High-Energy-Power Density Performance

Ionic Liquid Induced Electrostatic Self-Assemble of Reduced Graphene Oxide for High-Performance All-Solid-state Flexible Symmetric Supercapacitor

Surface engineering of graphene for high performance supercapacitors

Graphene with KI-modified pore structure and its electrochemical capacitors application

Nanocellulose/nitrogen and fluorine co-doped graphene composite hydrogels for high-performance supercapacitors

Highly Redox-active Oligomers between Graphene Sheets as Ultrahigh Capacitance/Rate and Stable Electrodes for Supercapacitors

An Approach to Enhance Carbon/polymer Interface Compatibility for Lithium-Ion Supercapacitors.

Surface functionalization of vertical graphene significantly enhances the energy storage capability for symmetric supercapacitors

Ionic liquids and Graphene: The ultimate combination for High-Performance supercapacitors

Electrochemical Performance of Activated Graphene Powder Supercapacitors Using a Room Temperature Ionic Liquid Electrolyte

Porous Graphene/CNT@Metal (Hydr)oxide Composite Films Achieving Fast Ion and Electron Kinetics for Asymmetric Supercapacitors with Ultra-High Volumetric Performance

Graphene-Polymer Nanocomposites and Roll-to-Roll (R2R) Compatible Flexible Solid-State Supercapacitor Based on Graphene Nanoplatelets and Ionic Liquid-Polymer Gel

Three-Dimensional Functionalized Graphenes with Systematical Control over the Interconnected Pores and Surface Functional Groups for High Energy Performance Supercapacitors

Three-dimensional graphitized carbon nanovesicles for high-performance supercapacitors based on ionic liquids.