Abstract:The public health and environment are currently facing significant risks due to the discharge of industrial wastewater, which contains harmful heavy metals and other contaminants. Therefore, there is a pressing need for sustainable and innovative technologies to treat wastewater. The main objective of this research was to develop novel composites known as chitosan, Padina pavonica, Fe(III), and nano MgO incorporated onto pomegranate peel with the specific purpose of removing Cd (II) and Cu (II) ions from aqueous solutions. The characterization of these nanocomposites involved the utilization of several analytical methods, including Fourier-transform infrared spectroscopy, scanning electron microscopy, X-ray diffraction, thermal gravimetric analysis, and X-ray photoelectron spectroscopy. The efficiency of these nanocomposites was evaluated through batch mode experiments, investigating the impact of factors such as pH, initial concentration, contact time, and adsorbent dose on the adsorption of Cu(II) ions. The optimum conditions for the removal of ions were pH = 5 for Cu (II) and 6 for Cd (II), contact time: 120 min, adsorbent dosage: 0.2 g, initial metal ion concentration: 50 mg/L for each metal ion for the present study. The MgO@Pp demonstrated the highest removal efficiencies for Cu(II) and Cd(II) at 98.2% and 96.4%, respectively. In contrast, the CS@Fe-PA achieved removal efficiencies of 97.2% for Cu(II) and 89.2% for Cd(II). The modified MgO@Pp exhibited significantly higher total adsorption capacities for Cu(II) and Cd(II) at 333.3 and 200 mg/g, respectively, compared to CS@Fe-PA, which had capacities of 250 and 142 mg/g, respectively. The adsorption of Cd (II) and Cu (II) ions by MgO@Pp was found to be a spontaneous process. The R 2 values obtained using the Freundlich and Redlich-Peterson models were the highest for the MgO@Pp composite, with values of 0.99, 0.988, 0.987, and 0.994, respectively, for Cu (II) and Cd (II). The pseudo-second-order equation was determined to be the best-fit kinetic model for this process. Reusability experiments confirmed that the adsorbents can be utilized for up to four regeneration cycles. Based on the findings of this study, MgO @ Pp is the most promising alternative and could be instrumental in developing strategies to address existing environmental pollution through adsorption.

Carbonaceous NiFe2O4 Nanocomposite: An Efficient Nano-Adsorbent for Toxic Metal Removal from Aqueous Solutions

Biosynthesis and Analytical Characterization of Iron Oxide Nanobiocomposite for In-Depth Adsorption Strategy for the Removal of Toxic Metals from Drinking Water

Fast and Effective Removal of Cadmium Ion from Water Using Chitosan Encapsulated Magnetic Fe 3 O 4 Nanoparticles

Bi2Co3O7@g-C3N4 nanocomposite for Cd (II) elimination: Adsorption equilibrium, kinetics and mechanistic approaches

Porous NiFe-oxide Nanocubes Derived from Prussian Blue Analogue As Efficient Adsorbents for the Removal of Toxic Metal Ions and Organic Dyes.

The study of removal Pb(II) and Ni(II) from aqueous solution by new adsorbent materials of nano-Mg(OH)2/fly ash

Effective fabrication and characterization of eco-friendly nano particles composite for adsorption Cd (II) and Cu (II) ions from aqueous solutions using modelling studies

A novel and facile green synthesis method to prepare LDH/MOF nanocomposite for removal of Cd(II) and Pb(II)

Preparation and Optimization of Polyaniline/ Titanium Dioxide/ Carboxymethyl Cellulose Powder for Effective Nickel Adsorption

Novel ternary mesoporous Co3CsO4-g-C3N4 nanocomposite as an efficient sorbent for Pb (II) and Cu (II) ions elimination

Facile adsorption-electroflotation method for the removal of heavy metal ions from water using carbon nanomaterials

Enhanced cadmium removal by a magnetic potassium ferrocyanide framework: Performance and mechanism study

Enhanced sequestration of heavy metals from aqueous solution on polyacrylamide grafted with cell@Fe3O4 nanocomposite

Synthesis of a nitrogen-rich dendrimer grafted on magnetic nanoparticles for efficient removal of Pb(ii) and Cd(ii) ions

A magnetic macroporous α-Fe2O3/Mn2O3 nanocomposite as an efficient adsorbent for simple and rapid removal of Pb(II) from wastewater and electronic waste leachate

Preparation of cast chitosan/polyether sulfone/Fe3O4 modified with mercapto and amine groups as a novel nanohybrid adsorbent for heavy metal removal from single and binary aqueous systems

Multifunctional Nanocomposites Fe 3 O 4 @sio 2 -EDTA for Pb(II) and Cu(II) Removal from Aqueous Solutions

Enhanced Removal of Cd(II) Ions from Aqueous Media via Adsorption on Facilely Synthesized Copper Ferrite Nanoparticles

Metal Removal from Nickel-Containing Effluents Using Mineral–Organic Hybrid Adsorbent

Removal of Cd(II) ion from aqueous solution using magnetic ionic liquid based nanocomposites [NiFe2O4@BMSI]Br: kinetics, isotherm and thermodynamic studies

Adsorption potential of orange rind-based nanosorbents for the removal of cadmium(II) and chromium(VI) from contaminated water