Abstract:Lithium transition-metal oxides (LiMn2O4 and LiMO2 where M = Ni, Mn, Co, etc.) are widely applied as cathode materials in lithium-ion batteries due to their considerable capacity and energy density. However, multiple processes occurring at the cathode/electrolyte interface lead to overall performance degradation. One key failure mechanism is the dissolution of transition metals from the cathode. This work presents results combining scanning electrochemical microscopy with inductively coupled plasma (ICP) and electron paramagnetic resonance (EPR) spectroscopies to examine cathode degradation products. Our effort employs a LiMn2O4 (LMO) thin film as a model cathode to monitor the Mn dissolution process without the potential complications of conductive additive and polymer binders. We characterize the electrochemical behavior of LMO degradation products in various electrolytes, paired with ICP and EPR, to better understand the properties of Mn complexes formed following metal dissolution. We find that the identity of the lithium salt anions in our electrolyte systems [ClO4–, PF6–, and (CF3SO2)2N–] appears to affect the Mn dissolution process significantly as well as the electrochemical behavior of the generated Mn complexes. This implies that the mechanism for Mn dissolution is at least partially dependent on the lithium salt anion.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c22235?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c22235</a>.CV curve of LiMn2O4 on SS in coin cell, charge/discharge curves of the LiMn2O4 thin film up to 500 cycles, rate capability cycling sequentially from 20 to 200 μA and back to 20 μA for every five cycles at each discharge rate within 3.4–4.3 V, cycling performances of the LiMn2O4 thin film between 3.0 and 4.3 V at 20 μA, CV curve of the LiMn2O4 film in LiClO4 and LiTFSI in PC electrolyte at a scan rate of 5 mV/s, using the SECM setup, where Pt wire is the counter electrode and Li metal is reference, and protocol of the standard feedback method to position tip (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c22235/suppl_file/am0c22235_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Understanding Transition-Metal Dissolution Behavior in LiNi0.5Mn1.5O4 High-Voltage Spinel for Lithium Ion Batteries

Insight into the cation migration and surface structural evolution of spinel LiNi0.5Mn1.5O4 cathode material for lithium-ion batteries

Tailoring Disordered/Ordered Phases to Revisit the Degradation Mechanism of High‐Voltage LiNi<sub>0.5</sub>Mn<sub>1.5</sub>O<sub>4</sub> Spinel Cathode Materials

Revisiting the Temperature-Dependent Phase Structure of Spinel LiNi0.5Mn1.5O4 for Lithium-Ion Batteries

Investigation Of The Effect Of Extra Lithium Addition And Postannealing On The Electrochemical Performance Of High-Voltage Spinel Lini0.5mn1.5o4 Cathode Material

Oxygen vacancies lead to loss of domain order, particle fracture, and rapid capacity fade in lithium manganospinel (LiMn₂O₄) batteries

Influence of Transition-Metal Order of LNMO Spinel on the Li Ion Diffusion

Ni/Mn ratio and morphology-dependent crystallographic facet structure and electrochemical properties of the high-voltage spinel LiNi0.5Mn1.5O4 cathode material

Synthesis, Modification, and Lithium‐Storage Properties of Spinel LiNi0.5Mn1.5O4

Electrochemical and ex situ XRD studies of a LiMn1.5Ni0.5O4 high-voltage cathode material

Failure Mechanisms of High-Voltage Spinel LiNi 0.5 Mn 1.5 O 4 with Different Morphologies: Effect of Self-Regulation by Lithium Benzimidazole Salt Additive

Failure Mechanisms of High-Voltage Spinel LiNi0.5Mn1.5O4 with Different Morphologies: Effect of Self-Regulation by Lithium Benzimidazole Salt Additive

Examining Performance Loss Mechanisms in Lithium-Ion Batteries with the High-Voltage Mn-Rich Spinel Positive Electrodes

Recent Progress of High Voltage Spinel LiMn1.5Ni0.5O4 Cathode Material for Lithium-Ion Battery: Surface Modification, Doping, Electrolyte, and Oxygen Deficiency

Truncated Octahedral High-Voltage Spinel LiNi0.5Mn1.5O4Cathode Materials for Lithium Ion Batteries: Positive Influences of Ni/Mn Disordering and Oxygen Vacancies

Overlithiation-driven structural regulation of lithium nickel manganese oxide for high-performance battery cathode

Synthesis of High-Voltage Spinel Lini0.5mn1.5o4 by Mn2o3 Nanosheets for Lithium-Ion Batteries with Superior Cycle Life Span

First-Principles Simulations for the Surface Evolution and Mn Dissolution in the Fully Delithiated Spinel LiMn 2 O 4

Investigation on Spinel LiNi0.5Mn1.5O4 Synthesized by MnCO3 Prepared under Different Conditions for Lithium-Ion Batteries

Fatigue in 0.5Li(2)mno(3):0.5Li(ni1/3co1/3mn1/3)o-2 Positive Electrodes for Lithium Ion Batteries

Understanding Degradation at the Lithium-Ion Battery Cathode/Electrolyte Interface: Connecting Transition-Metal Dissolution Mechanisms to Electrolyte Composition