Abstract:Development of energy-efficient fast cycling accelerator magnets is critical for the next generation of proton rapid cycling synchrotrons (RCS) for neutrino research and booster accelerators of future muon colliders. We see a unique opportunity for having such magnets to be built on base of High Temperature Superconductors (HTS). Besides being superconducting at relatively high temperatures, rare-earth HTS tapes have shown very small AC losses compared to low-temperature NbTi superconductor cables. Recent tests of the HTS-based 0.5 m long two-bore superconducting accelerator magnet have shown record high dB/dt ramping rates of about 300 T/s at 10 Hz repetition rate and 0.5 T B-field span. No temperature rise in 6 K cooling He was observed within the 0.003 K error setting the upper limit on the cryogenic power loss in the magnet conductor coil to be less than 0.2 W/m. Based on this result we outline a possible upgrade of this test magnet design to 2 T B-field in the 10 mm beam gap with the dB/dt ramping rates up to 1000 T/s. The power test results of this short sample magnet will be used to project both cryogenic and electrical power losses as a function of the magnet B-field and the dB/dt ramping rates. Then these projections will be scaled to the range of expected accelerator magnet beam gaps and B-fields for the proton and muon RCS accelerators. We invite collaborators to join these studies and call for support of the R&D program aimed at comprehensive demonstration of this approach that includes design, construction, and power tests of a long prototype of the HTS-based fast-cycling accelerator magnet by 2028.

Hybrid Rings of Fixed 8T Superconducting Magnets and Iron Magnets Rapidly Cycling between -2T and +2T for a Muon Collider

Accelerating Muons to 2400 GeV/c with Dogbones Followed by Interleaved Fast Ramping Iron and Fixed Superconducting Magnets

Conceptual designs of dipole magnet for muon collider ring

Test of a 1.8 Tesla, 400 Hz Dipole for a Muon Synchrotron

Mitigating Radiation Impact on Superconducting Magnets of the Higgs Factory Muon Collider

The Higgs Factory Muon Collider Superconducting Magnets and Their Protection Against Beam Decay Radiation

6D Ionization Muon Cooling with Tabletop Rings

Radiation effects in a muon collider ring and dipole magnet protection

A Complete Scheme for a Muon Collider

Solving Critical Problems of the Muon Collider Higgs Factory: Optics, Magnets and their Protection, Detector Backgrounds

Synchronization and Phase Locking of Resonant Magnet Power Supplies For Mu2e Experiment at Fermilab

Fast cycling HTS based superconducting accelerator magnets: Feasibility study and readiness demonstration program driven by neutrino physics and muon collider needs

A Helical Cooling Channel System for Muon Colliders

Simulated performance of the production target for the Muon g-2 Experiment

A Complete Scheme of Ionization Cooling for a Muon Collider

Superconducting Magnet with the Reduced Barrel Yoke for the Hadron Future Circular Collider

Permanent-magnet Quadrupoles for an Interdigital H-mode Drift Tube Linear Accelerator: Optimization Code and Adjustable Magnet Design

A 233 km Circumference Tunnel for $e^+$$e^-$, $p$$\bar {p}$, and $μ^{+} μ^{-}$ Colliders

The 5.8 T Cryogen-Free Gyrotron Superconducting Magnet System on HL-2A

The Mechanical and Thermal Design for the Mice Coupling Solenoid Magnet

805 MHz and 201 MHz RF Cavity Development for MUCOOL