Abstract:This paper presents a laboratory study on electrokinetic dewatering (EKD) of sewage sludge with fixed and moving electrodes. The experiments with fixed electrodes were conducted in two purposely designed Perspex cylinders to investigate the mechanism of attenuation in electroosmotic flow and dewatering efficiency. The experiments with moving electrodes were performed in an innovatively designed apparatus, in which the anode made of an array of stainless rods can be moved toward the fixed cathode plate. The fixed-electrode experiments showed that the electrical resistance of the dewatered section near the anode increased with the treating time, and hence the voltage gradient left for the undewatered section decreased. The increased electrical resistance resulted in an increase in the invalid energy consumption, and the reduced voltage gradient at the undewatered section resulted in an attenuation in electroosmotic flow and dewatering effect. Comparison tests conducted with the moving-anode apparatus further demonstrated the attenuation mechanism. Only a slight attenuation in the electroosmotic flow was observed in the moving-anode experiments, in which the anode array was moved to pass by the dewatered section and keep the voltage gradient on the undewatered section unchanged. As compared with the fixed-electrode experiments, the dewatering effect for the moving-anode experiments was much better, and the energy consumption in terms of removed water volume was significantly lower. When the moving-anode method was applied with a voltage gradient of 8 V/cm and an initial electrode spacing of 1 cm, the sludge with a water content of 82.1% can be dewatered to 62.2%, and the estimated energy consumption is as low as 18 kWh . m(-3). The research findings shine a light on the use of the moving-electrode method for improving the treatment efficiency of EKD. (C) 2015 American Society of Civil Engineers.

Research on push-type sludge electro-dewatering equipment with fixed-plate electrodes

Electrokinetic Dewatering of Sewage Sludge with Fixed and Moving Electrodes: Attenuation Mechanism and Improvement Approach

Experimental Study on Efficiency of Electrokinetic Dewatering Technique with Movable Electrodes for Sewage Sludge

Study on Enhanced Dewatering of Surplus Sludge from Municipal Wastewater Treatment Plant by Electroflocculation Process with Electrode Plates

Optimizing and Understanding the Pressurized Vertical Electro-Osmotic Dewatering of Activated Sludge

Optimizing sludge dewatering with an alternate pressure and electric field

Laboratory study on electroosmosis dewatering of sewage sludge

Pressure filtration dewatering performance of sand-washing slurry and rapid test method

Electro-Osmotic Dehydration of Hangzhou Sludge with Selected Electrode Arrangements

Influence of High Voltage Gradients on Electrokinetic Dewatering for Wenzhou Clay Slurry Improvement

Effects of voltage and pressure on sludge electro-dewatering process and the dewatering mechanisms investigation

Slurry Improvement by Vacuum Preloading and Electro-Osmosis

Electro-osmotic dewatering of pulp and paper sludge

Laboratroy Study on Electrokinetic Dewatering of Sewage Sludge

Vacuum Preloading Combined with Intermittent Electro-Osmosis for Dredged Slurry Strengthening

WATER REMOVAL FROM SLUDGE IN A HORIZONTAL ELECTRIC FIELD

Electro-dewatering performance of sewage sludge under interrupted pulsating voltage: A comparison between square shape and half-sine shape waveform

Experimental study on sludge adhesion reduction using surface electro-osmotic pulse

Coupling Mechanism and Parameter Optimization of Sewage Sludge Dewatering Jointly Assisted by Electric Field and Mechanical Pressure

Experimental study on the electro-dewatering transport of Hangzhou sludge

Theoretical Analysis and Experimental Verification of Large Deformation Electro-Osmosis Consolidation Treatment of Dredged Slurry