Abstract:The Molasse Basin is one of the most promising areas for deep geothermal exploration in Germany and a very ambitious project in this region is to power the entire district heating system of the city of Munich with renewable energies by 2040; a major part of this will consist of geothermal energy. As part of a joint project (financed by the German Federal Ministry For Economic Affairs And Energy; FKZ 0324332B) the Leibniz Institute for Applied Geophysics (LIAG) works together with the Munich City Utilities (Stadtwerke M&#252;nchen), to improve reservoir characterization and sustainable reservoir exploration within the German Molasse Basin. The target horizon for hydrothermal exploration is the aquifer in the Upper Jurassic carbonates. A major problem is the strong heterogeneity of the carbonates. Compared to quantity and quality of the structural data of the reservoir, the database of reservoir properties such as density, porosity and permeability, which describe the geothermal potential, is insufficient. Therefore, it is necessary to generate such data in order to improve the value of the structural information. A 3D seismic survey cannot only provide structural information, but also important reservoir properties such as elastic parameters and seismic attributes. One of the most important attributes is the acoustic impedance, which can be determined with a seismic inversion and used to estimate a porosity volume.The data basis for this study was the 170km&#178; GRAME-3D seismic survey measured in Munich, a structural geological model, and drilling and logging data from the geothermal site &#8220;Sch&#228;ftlarnstra&#223;e&#8221;.The inversion results show low impedance values at the top of the reservoir, but also at the middle part. Spatially, the intermediate block of the Munich fault shows low values but also the eastern part of the hanging wall block and the western part of the footwall block. Based on a well correlation a relationship between acoustic impedance and porosity could be determined and a 3D porosity volume was calculated. In the upper part but also in the middle part of the reservoir areas with increased porosity (>10%) are shown, which might indicate a high geothermal potential.For a better classification, an attribute analysis was performed. The intermediate block and the eastern part of the hanging wall block show strongly fractured rocks. In contrast, there are hardly any conspicuous features in the western part of the footwall block, although high porosities are also expected here. This suggests that the presence of faults is not the only factor favoring high porosities in carbonates. More likely is a combination with karstification processes, which is why even areas that do not show enhanced tectonic deformation have high porosities.

Characterizing shallow fault zones by integrating profile, borehole and array measurements of seismic data and distributed acoustic sensing

ICDP drilling of the Eger Rift observatory: magmatic fluids driving the earthquake swarms and deep biosphere

Geophysical downhole logging analysis within the shallow-depth ICDP STAR drilling project (central Italy)

High-resolution seismic reflection survey crossing the Insubric Line into the Ivrea-Verbano Zone: Novel approaches for interpreting the seismic response of steeply dipping structures

Seismological monitoring of magmatic and tectonic earthquakes in the East Eifel Volcanic Field, Germany

Active seismic surveys for drilling target characterization in Ossola Valley: International Continental Scientific Drilling Program (ICDP) project Drilling the Ivrea–Verbano zonE (DIVE) phase I

High-resoultion Shallow Anomaly Characterization Using Cross-Hole P- and S-wave Tomography

Assessing the hazard of fault triggering by deep geothermal energy production in an active fault system via a 1D stress model and 3D fault mapping

Blast-Assisted Subsurface Characterisation Using a Novel Distributed Acoustic Sensing Setup Based on Geometric Phases

Experimental seismic crosshole setup to investigate the application of rock physical models at the field scale

Fault Zone Spatial Stress Variations in a Granitic Rock Mass: Revealed by Breakouts Within an Array of Boreholes

High-Resolution Shallow Structure along the Anninghe Fault Zone, Sichuan, China, Constrained by Active Source Tomography

Fault Reactivation Analysis Using Microearthquake Clustering Based on Signal-to-Noise Weighted Waveform Similarity

Estimation of shallow structure along the hinagu fault by applying seismic interferometry to DAS observations conducted along national route 3 in Kumamoto prefecture, Japan

3D Near-Surface P-wave Velocity Structure Imaging with Distributed Acoustic Sensing and Electric Hammer Source

Seismic Monitoring of a Deep Geothermal Field in Munich (Germany) Using Borehole Distributed Acoustic Sensing

Inverse flow zone characterization using distributed temperature sensing in a deep geothermal production well located in the Southern German Molasse Basin

Porosity estimation and characterization of a geothermal carbonate reservoir in the South German Molasse Basin based on seismic inversion and attribute analysis

Downhole distributed acoustic sensing provides insights into the structure of short‐period ocean‐generated seismic wavefield

Magmatic and sedimentary structure beneath the Klyuchevskoy Volcanic Group, Kamchatka, from Ambient Noise Tomography

High-Resolution Ambient Noise Imaging of Geothermal Reservoir Using 3C Dense Seismic Nodal Array and Ultra-Short Observation