Abstract:Low temperature proton exchange membrane water electrolyzer (PEMWE) represents a critical technology for green hydrogen production. It offers the advantages of significantly higher current density and higher H 2 purity, rendering it a preferred technology when high energy efficiency and low footprint are essential. Working in the oxidative and acidic environment under high polarization voltage, however, adds substantial demand to the electrode catalyst and the support. This is particularly the case at anode where the oxygen evolution reaction (OER) takes place. At present, the platinum group metal (PGM) materials such as Ir black or Ir oxide are catalysts of choice. Their high cost and limited reserve add a significant cost barrier to PEM electrolyzer, which contributes to the overall expense of hydrogen production next only to the cost of electricity. Replacing Ir with earth-abundant transition metal oxides could help to reduce the electrolyzer system cost. For PEMWE application, a PGM-free anodic catalyst must be highly active to match the performance of Ir. Furthermore, it must be stable against oxidative acid corrosion. At Argonne National Laboratory, we recently developed a new PGM-free OER of a nanofibrous cobalt spinel catalyst co-doped with lanthanum and manganese (LMCF). [1] The catalyst was synthesized from the precursor of cobalt zeolitic methyl-imidazolate framework (Co-ZIF) doped with manganese and lanthanum. The Co-ZIF was mixed with a polymer solution and electrospun into nanofiber before being converted to fibrous cobalt spinel under low temperature oxidation to remove all the organics and carbon. The new PGM-free catalyst demonstrated a low overpotential of 353 mV (RHE) at 10 mA/cm 2 and a low OER degradation over 360 hours in acidic electrolyte. A PEMWE containing this catalyst at its anode at ~2.0 mg/cm 2 demonstrated a current density of 2000 mA/cm 2 at 2.47 volts (Nafion® 115 membrane) or 4000 mA/cm 2 at 3.00 volt (Nafion® 212 membrane). The membrane electrode was also subjected to accelerated-stress-test (AST) in both voltage cycling and galvanostatic run at different current densities. Low degradation rates under both ASTs were observed. In addition to catalyst design and synthesis, we also conducted extensive structural characterizations, stability measurement, as well as computational modeling. Our in situ study found that the OER process involves significant lattice oxygen movement, leading to lowering instead of raising the cobalt oxidation state during the electrolysis. The measurement of the stability number, combined with computational Pourbaix diagram, elucidated the importance of the operating potential in reducing catalyst dissolution. These findings offer in-depth understanding and direction of future development for PGM-free OER catalyst in PEM water electrolyzer. Acknowledgement : This work is supported by the U.S. Department of Energy, Office of Energy Efficiency and Renewal Energy, Hydrogen and Fuel Cell Technologies Office, and by Laboratory Directed Research and Development funding of Argonne National Laboratory, provided by the Director, Office of Science, of the U.S. Department of Energy under Contract No. DEAC02-06CH11357. Work performed at the Center for Nanoscale Materials and Advanced Photon Source, both U.S. Department of Energy Office of Science User Facilities, was supported by the U.S. DOE, Office of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357. [1] “La- and Mn-doped cobalt spinel oxygen evolution catalyst for proton exchange membrane electrolysis” Lina Chong, Guoping Gao, Jianguo Wen, Haixia Li, Haiping Xu, Zach Green, Joshua D. Sugar, A. Jeremy Kropf, Wenqian Xu, Xiao-Min Lin, Hui Xu, Lin-Wang Wang, Di-Jia Liu, Science 380, 609–616 ( 2023 )

Tri‐Metallic Catalyst for Oxygen Evolution Reaction Enables Continuous Operation of Anion Exchange Membrane Electrolyzer at 1A cm−2 for Hundreds of Hours

Origin of Enhanced Oxygen Evolution in Restructured Metal‐Organic Frameworks for Anion Exchange Membrane Water Electrolysis

Metal Organic Framework-Based Alkaline Oxygen Evolution Reaction Electrocatalysts: Morphology, Metal Loading, and Durability

Accelerated Discovery of Multi-Metallic Nanostructured Catalysts for Anion Exchange Membrane Water Electrolyzers: Oxygen Evolution Reaction

Designing Trimetallic CoNiFeMOF Synthesized by Electrochemical and Solvothermal Methods and Direct Use Towards Efficient Oxygen Evolution Reaction

Self-Optimized Metal–Organic Framework Electrocatalysts with Structural Stability and High Current Tolerance for Water Oxidation

(Invited) Metal Oxide Nanoparticles for Stable Alkaline Oxygen Evolution Reaction in an Anion Exchange Membrane Electrolyser Cell

Advanced Bifunctional Oxygen Reduction and Evolution Electrocatalyst Derived from Surface-Mounted Metal-Organic Frameworks

Modulating metal–organic frameworks for catalyzing acidic oxygen evolution for proton exchange membrane water electrolysis

Trimetallic-organic framework/MXene composite as an oxygen evolution reaction electrocatalyst with elevated intrinsic activity

Carbon quantum dot-mediated binary metal–organic framework nanosheets for efficient oxygen evolution at ampere-level current densities in proton exchange membrane electrolyzers

Fe-Based Metal–Organic Framework-Ni 3 S 2 Heterostructure Nanocomposites for Efficient Oxygen Evolution Reaction at High Current Densities

Enhanced Local Ion Transport in High-Performance Anion Exchange Membrane Water Electrolyzers Via Quaternary Ammonium-Functionalized Metal-Organic Framework Electrocatalysts

Valence Band-Tunable NiFe Electrocatalyst Triggered by the Dynamic Mo Exudation and Re-Deposition for Superior High Current Density Oxygen Evolution Reaction

Amorphous Engineering of Scalable Metal-Organic Framework-Derived Electrocatalyst for Highly Efficient Oxygen Evolution Reaction

Self-Reconstructed Metal-Organic Framework-Based Hybrid Electrocatalysts for Efficient Oxygen Evolution

Mo 6+ activated multimetal oxygen-evolving catalysts.

Composition-Dependent Dynamics of Nickel-Iron-Cobalt Metal Catalysts for Oxygen Evolution Reaction

Structural transformation of highly active metal–organic framework electrocatalysts during the oxygen evolution reaction

PGM-Free Oxygen Evolution Reaction Catalyst for PEM Water Electrolysis – a Mechanistic Study on Activity and Durability for Practical Applications

Unveiling Chemically Robust Bimetallic Squarate‐Based Metal–Organic Frameworks for Electrocatalytic Oxygen Evolution Reaction