Abstract:Ultraviolet (UV) photodetectors with high responsivity and fast response are crucial for practical applications. Double perovskite Cs2AgBiBr6 has emerged as a promising optoelectronic material due to its excellent physics and photoelectric properties. However, no work is reported based on its film for photodetector applications. Herein, an ITO/SnO2/Cs2AgBiBr6/Au hole-transport layer free planar heterojunction device is fabricated for photodetector application. The device is self-powered with two responsivity peaks at 350 and 435 nm, which is suitable for ultraviolet-A (320-400 nm) and deep-blue light detecting. A high responsivity of 0.11 A W-1 at 350 nm and a quick response time of less than 3 ms are obtained, which is significantly higher than other semiconductor oxide heterojunction-based UV detectors. More importantly, the stability is significantly better than most of the hybrid perovskite photodetectors reported so far. Its photocurrent shows no obvious degradation after more than 6 months storage in ambient conditions without any encapsulation. Consequently, the utilization of Cs2AgBiBr6 film is a practical approach for high performance, large-area lead-free perovskite photodetector applications. For the mechanism, it is found that photogenerated carriers in Cs2AgBiBr6 film are separated at the Cs2AgBiBr6/SnO2 heterojunction interface by its built-in field. The low toxicity and high stability of this double perovskite active layer make it very promising for practical applications.

Highly efficient broadband photodetectors based on lithography-free Au/Bi 2 O 2 Se/Au heterostructures

Hybrid Dirac Semimetal-Based Photodetector with Efficient Low-Energy Photon Harvesting

Ultrafast visible-infrared photodetector based on the SnSe<sub>2</sub>/Bi<sub>2</sub>Se<sub>3</sub> heterostructure

Construction of Bi2O2Se/Bi2Se3 Van Der Waals Heterostructures for Self-Powered and Broadband Photodetectors.

Fast Fabrication of WS<sub>2</sub>/Bi<sub>2</sub>Se<sub>3</sub> Heterostructures for High-Performance Photodetection

High-Performance Waveguide-Integrated Bi2O2Se Photodetector for Si Photonic Integrated Circuits.

High-performance broadband WO3−x/Bi2O2Se photodetectors based on plasmon-induced hot-electron injection

Self-Powered and Broadband Bismuth Oxyselenide/p-Silicon Heterojunction Photodetectors with Low Dark Current and Fast Response

High-Performance Ultra-Broadband Photodetector Based on Fe 3 O 4 /CrSiTe 3 Heterostructures

Broadband Photodetectors: Broadband Bi 2 O 2 Se Photodetectors from Infrared to Terahertz (Adv. Funct. Mater. 14/2021)

Highly efficient 1D p-Te/2D n-Bi2Te3 heterojunction self-driven broadband photodetector

Surface Engineering in SnO 2 /Si for High-Performance Broadband Photodetectors

Bi2O2Se/BP van der Waals heterojunction for high performance broadband photodetector

Thickness modulation of incline-grown Bi2O2Se for the construction of high-performance phototransistors

Self‐Driven WSe 2 /Bi 2 O 2 Se Van der Waals Heterostructure Photodetectors with High Light On/Off Ratio and Fast Response

A self-powered high performance UV-Vis-NIR broadband photodetector based on β-Bi2O3 nanoparticles through defect engineering

High-performance broadband heterojunction photodetectors based on multilayered PtSe 2 directly grown on a Si substrate

High-Performance Ultra-Broadband Photodetector Based on Fe3O4/CrSiTe3 Heterostructures

Facile synthesis of hybrid nanorods with the Sb2Se3/AgSbSe2 heterojunction structure for high performance photodetectors.

Fabrication of Au Nanoparticle/double-Walled Carbon Nanotube Film/tio2 Nanotube Array/ti Heterojunctions with Low Resistance State for Broadband Photodetectors

Highly Efficient and Stable Self-Powered Ultraviolet and Deep-Blue Photodetector Based on Cs2AgBiBr6/SnO2 Heterojunction